FUJI ACCESSORIES

2049F Flexible Whip Hose - Fuji Lightweight 6ft. hose is highly flexible. Couplings are made from a glass fiber-reinforced polymer. Takes weight off the wrist and the flexibility allows for effortless manoeuvrability of the spray gun. An added feature...

For use with Fuji T70 spray guns purchased after Sept. 2019. This 1 Qt, Cup is recommended for everything. (Some some water-based coatings that may stain the cup) Specifications: 1 Qt. for 2095

90445 5/pack Nylon Paint Strainer - FUJI SPRAY Available in a 5/pack Fits at the end of the metal fluid tube

70205 1.8mm High Output Aircap Set no. 5 for M Gun - FUJI Size: 1.8mm

70202 1mm Fine Aircap Set no. 2 for M Gun - FUJI Size: 1mm

5029 Turbine Filter for Q3, Q4 and Q5 PLATINUM Series Turbine filter fits all Q Platinum Series turbines only Friction-fit allows for quick and easy replacement, without taking apart the turbine Washable WEIGHT: 0.1lb / 0.06kg

2039 Bottom Feed Cup Parts Kit (T-70, 7001 M-Model& 7003 M-ModelSpray Guns) Includes the wearable parts that you should always have on hand: 3 X#2036 Gaskets 3 X #2038 Diaphragms 3 X #2024 Pressure Tube with Check Valves (All the parts shown in the...

20245 Pressure Tubes with Check valve for Bottom Feed (T-Series Spray Gun) Pressure tubes with check valve installed Available in 5-pack Tubes are designed to fit all Bottom Feed Fuji Spray® guns If clogged, the check valve cannot be taken apart,...

2024L5 Pressure Tube - FUJI SPRAY Pressure tube with check valves for any Fuji quarter cup gun. These pressure tubes also fit older Fuji spray guns

2030Gravity Feed Cup Parts Kit for 400cc Cup(T-75G, G-XPC&7002G M-ModelGravity Spray Guns) Includes the wearable parts that you should always have on hand: 5 X#9050 Gaskets designed to fit a 400cc cup 5 X #2024LLong Pressure Tube with Check...

1.8mm Aircap Set #5 High output 1.8mm (.070") aircap set for faster production with any type of paint. It is used for XT Spray gun only and does not fit older Fuji Spray guns

1mm Aircap Set #3 Fine 1mm (.039") size aircap set for finer atomization. It is suitable for most water-based lacquers and shading. For Xpc Spray gun only and does not fit older Fuji Spray guns

0.7mm Aircap Set #2 Finest 0.7mm (0.027") size Aircap set for finest atomization. It is suitable for inks, shading and mist coats. For Xpc Spray gun only and does not fit older Fuji Spray gun.

40092 2 Mini Mite Turbine Filters - Fuji Spray Turbine filters fit all Mini-Mite Model Turbines. Coarse filter goes on the right hand side (as seen when looking at the front of the case) fine filter on the left. Please note these filters will not fit...

Brass Quick Connect Attaches on the male end of the hose and allows quick insertion and quick release of the gun.

2032 Air Control Valve Connects between hose and brass quick connect Limits cfm/pressure to the gun reducing bounce back and over-spray WEIGHT: 0.1lb/ 0.03kg