null

Hand Tools

Hand Tools

  • WORKSHARP REPLACEMENT DISC FOR CPE2C
    Add to Cart

    WorkSharp

    WORKSHARP REPLACEMENT DISC FOR CPE2C

    CAD $14.99
    Replacement sharpening discs for the Work Sharp E2 and E2P electric knife sharpeners. Contains (4) discs. These long lasting, cool cutting engineered abrasives are a direct replacement for the discs included with the E2 or E2P. Each disc is 2 sided,...
    CPAC013
    CAD $14.99
    Add to Cart
  • WORKSHARP PIVOT PLUS KNIFE SHARPENER
    Add to Cart

    WorkSharp

    WORKSHARP PIVOT PLUS KNIFE SHARPENER

    CAD $14.95
    The Work Sharp Pivot Plus Knife Sharpener is a fast, easy and effective way to sharpen any knife you own. Convex-Carbide sharpening blades quickly restore a sharp edge; while the fine grit ceramic rods hone the edge to factory level sharpness...
    WSEDCPVPI
    CAD $14.95
    Add to Cart
  • WORKSHARP KNIFE AND TOOL MK2 SHARPENER
    Add to Cart

    WorkSharp

    WORKSHARP KNIFE AND TOOL MK2 SHARPENER

    CAD $145.00
    Sharpens straight blade knives, curved knives, tanto blades, filet knives, serrated knives, gut hooks, scissors, axes, hatchets, mower blades, garden shears, shovels and most any tool with a blade. Gives you fast, easy, precision results every time...
    WSKTS2C
    CAD $145.00
    Add to Cart
  • WORKSHARP KITCHEN KNIFE SHARPENER
    Add to Cart

    WorkSharp

    WORKSHARP KITCHEN KNIFE SHARPENER

    CAD $69.99
    The Work Sharp Electric Kitchen Knife Sharpener is a compact powered kitchen knife The Work Sharp Electric Kitchen Knife Sharpener is a compact powered kitchen knife sharpener that will sharpen every kitchen knife you own. The angle guides provide a...
    CPE2C
    CAD $69.99
    Add to Cart
  • WORKSHARP BENCHSTONE KNIFE SHARPENER
    Add to Cart

    WorkSharp

    WORKSHARP BENCHSTONE KNIFE SHARPENER

    CAD $69.95
    The Work Sharp Bench stone Knife Sharpener is an Angle Guided, 3-sided abrasive sharpening system. Medium (320) Grit Diamond and Fine (600) Grit Diamond Plates quickly restore a sharp edge, while the Fine Grit Ceramic Stone creates an incredibly keen...
    WSBCHBSSI
    CAD $69.95
    Add to Cart
  • WORK SHARP ASSORTED BELT KIT FOR WSKTSKO
    Add to Cart

    WorkSharp

    WORK SHARP ASSORTED BELT KIT FOR WSKTSKO

    CAD $25.99
    WSSAKO81113C Assorted Belt Kit for WSKTSKO - WORKSHARP Replacement abrasive belt assortment for the WSKTS-KO only. Not compatible with other Work Sharp tools. INCLUDES (1 of each belt): P120 Extra Coarse Grit, 3/4" x 12" X65 Coarse Grit (P220...
    WSSAKO81113C
    CAD $25.99
    Add to Cart
  • WOODTURNING TOOLS CURVED SCRAPER SORBY
    Add to Cart

    Robert Sorby

    WOODTURNING TOOLS CURVED SCRAPER SORBY

    CAD $93.99
    Curved Scraper - Robert Sorby The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an aggressive cut, whilst retaining...
    828H
    CAD $93.99
    Add to Cart
  • VARI GRIND ATTACHMENT LARGE TOOLS
    Add to Cart

    ONEWAY

    VARI GRIND ATTACHMENT LARGE TOOLS

    CAD $57.00
    This Jig is designed to be used with the Wolverine Grinding Jig. For ½" to 1-1/8" dia. Tools. Oneway's optional Vari-grind attachment for gouges. It works with the V-arm to provide perfect control for grinding almost any bevel shape from slight...
    3074
    CAD $57.00
    Add to Cart
  • UTILITY TRACK 36IN.
    Add to Cart

    UTILITY TRACK 36IN.

    CAD $18.99
    Utility Track 36" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount
    B2529
    CAD $18.99
    Add to Cart
  • UTILITY TRACK 24IN.
    Add to Cart

    UTILITY TRACK 24IN.

    CAD $14.99
    Utility Track 24" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount
    B2528
    CAD $14.99
    Add to Cart
  • UTILITY TRACK 12IN.
    Add to Cart

    UTILITY TRACK 12IN.

    CAD $10.99
    Utility Track 12" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount
    B2527
    CAD $10.99
    Add to Cart
  • TTRACK PLUS 48IN. W/ADJ. LEXAN SCAL INCRA
    Add to Cart

    Incra

    TTRACK PLUS 48IN. W/ADJ. LEXAN SCAL INCRA

    CAD $32.99
    Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...
    TTRACKPLUS48
    CAD $32.99
    Add to Cart
  • TTRACK PLUS 36IN. W/ADJ. LEXAN SCAL INCRA
    Add to Cart

    Incra

    TTRACK PLUS 36IN. W/ADJ. LEXAN SCAL INCRA

    CAD $24.99
    Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...
    TTRACKPLUS36
    CAD $24.99
    Add to Cart
  • TTRACK PLUS 24IN. W/ADJ. LEXAN SCAL INCRA
    Add to Cart

    Incra

    TTRACK PLUS 24IN. W/ADJ. LEXAN SCAL INCRA

    CAD $20.99
    Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...
    TTRACKPLUS24
    CAD $20.99
    Add to Cart
  • TRIANGULAR SCALE RULER 12IN.
    Add to Cart

    DASQUA

    TRIANGULAR SCALE RULER 12IN.

    Now: CAD $12.99
    Was: $15.99
    This Triangular Architect's ruler features 3 colour coded sides with 6 different scales; 100; 1:200; Yellow: 1:500; 1:600, blue: 1:300; 1:400. This professional grade ruler provides great accuracy, and the colour-coded grooves allow for quick and...
    B4137
    Now: CAD $12.99
    Was: $15.99
    Add to Cart
  • TREND ESSENTIAL DIAMOND SHARPENING KIT
    Add to Cart

    Trend Routing Technology

    TREND ESSENTIAL DIAMOND SHARPENING KIT

    CAD $249.00
    Keeping your plane irons and chisels sharp is critical to your success with them, and this kit from Trend Tool Technology will help you do just that. The kit comes with everything you need to flatten, hone and polish the edges of your tools. Including a...
    DWSKITH
    CAD $249.00
    Add to Cart
  • TREND CREDIT CARD D/S F/C DIAMOND STONE
    Add to Cart

    Trend Routing Technology

    TREND CREDIT CARD D/S F/C DIAMOND STONE

    Now: CAD $36.71
    Was: $59.99
    B3242 Credit Card Double-Sided Diamond Stone - TREND A precision double sided credit card size diamond stone. Fine 600 grit (25 micron) and coarse 300 grit (50 micron) Complete with storage wallet. Guaranteed for five years. Ideal for fluted, shaped &...
    Clearance
    B3242
    Now: CAD $36.71
    Was: $59.99
    Add to Cart
  • TRACK T ALLUMINUM 36IN. WITH 2 HOLD DOWN
    Add to Cart

    TRACK T ALUMINIUM 36IN. WITH 2 HOLD DOWN

    CAD $39.99
    36" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...
    B238436
    CAD $39.99
    Add to Cart
  • TRACK T 24IN. ALLUMINUM WITH 2 HOLD DOWN
    Add to Cart

    TRACK T 24IN. ALUMINIUM WITH 2 HOLD DOWN

    CAD $29.99
    24" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...
    B238424
    CAD $29.99
    Add to Cart
  • TRACK CLAMP KREG
    Add to Cart

    Kreg

    TRACK CLAMP KREG

    CAD $30.99
    KMS7520 Track Clamp – KREG Track Clamps from Kreg make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy to use clamps lock into place on the underside of the Accu-Cut track and starting block to offer additional...
    KMS7520
    CAD $30.99
    Add to Cart
  • TOOL REST STEM 7/8IN. X 4.3/4IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST STEM 7/8IN. X 4.3/4IN.

    CAD $18.99
    765S22 7/8" Diameter Stem x 4-3/4" Long - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is...
    765S22
    CAD $18.99
    Pre-Order Now
  • TOOL REST STEM 1IN. X 6IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST STEM 1IN. X 6IN.

    CAD $21.99
    765S24L 1" Diameter Stem x 6" Long - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used...
    765S24L
    CAD $21.99
    Pre-Order Now
  • TOOL REST STEM 1IN. X 4.3/4IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST STEM 1IN. X 4.3/4IN.

    CAD $26.99
    765S24 1" Diameter Stem x 4-3/4" Long - Robert Sorby These high quality modular tool rest posts are made from super strong, precision ground polished alloy steel for vibration free turning. This modular tool rest system enables the turner to build up a...
    765S24
    CAD $26.99
    Pre-Order Now
  • TOOL REST 5/8IN. STEM 3 1/2IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST 5/8IN. STEM 3 1/2IN.

    CAD $24.99
    765S16 TOOL REST 5/8" STEM 3 1/2" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rest: 4", 6" and...
    765S16
    CAD $24.99
    Pre-Order Now
  • TOOL REST 25MM STEM 4 3/4IN.
    Pre-Order Now

    TOOL REST 25MM STEM 4 3/4IN.

    CAD $25.99
    765S25 TOOL REST 25MM STEM 4 3/4" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rests: 4", 6"...
    765S25
    CAD $25.99
    Pre-Order Now
  • TOOL REST 25MM STEM 2 1/4IN.
    Add to Cart

    TOOL REST 25MM STEM 2 1/4IN.

    CAD $19.99
    765S25S TOOL REST 25MM STEM 2 1/4" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rest: 4", 6"...
    765S25S
    CAD $19.99
    Add to Cart
  • TOOL REST 20MM STEM 4 3/4IN.
    Add to Cart

    TOOL REST 20MM STEM 4 3/4IN.

    CAD $18.99
    765S20 TOOL REST 20MM STEM 4 3/4" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rests: 4", 6"...
    765S20
    CAD $18.99
    Add to Cart
  • THREAD CUTTER 16TPI C/W HANDLE SORBY
    Add to Cart

    Robert Sorby

    THREAD CUTTER 16TPI C/W HANDLE SORBY

    CAD $123.99
    Thread Cutter - 16TPI Cutting tools have been produced in 10, 16 and 20 thread per inch, with a unique, enhanced helix angle specially designed for use in wood to compliment these excellent tools. A Relief Cutting Tool Support Rest makes...
    890H16
    CAD $123.99
    Add to Cart
  • THICKNESS GAUGE 26 LEAVES
    Add to Cart

    THICKNESS GAUGE 26 LEAVES

    CAD $7.99
    B622 Thickness Gauage 26 leaf thickness gauge. Each leaf is marked. Leaves from .0015” to .025”Edge of each leaf is round and approximately 3 3/8” long. High quality tempered steel, and made to close tolerances.
    B622
    CAD $7.99
    Add to Cart
  • TEST INDICATOR .03IN. X .0005IN.

    TEST INDICATOR .03IN. X .0005IN.

    CAD $49.99
    Dial Test Indicator Fully jeweled movement Range: .03" Reading: 0-15-0" Graduation: .0005"
    B1967
    CAD $49.99
  • TENONING JIG CRAFTEX
    Add to Cart

    Craftex

    TENONING JIG CRAFTEX

    CAD $169.00
    Super Tenon Jig All cast iron to fit any 3/4" table slot with adjusters for fit Screw clamping to 5" clamping plate with adjustment to 20 degree from vertical 45 degree fence to allow compound angles Micro adjustment Two handles for control Designed to...
    CT084
    CAD $169.00
    Add to Cart
  • TEMPERED GLASS WHEEL FOR WS3000
    Add to Cart

    WorkSharp

    TEMPERED GLASS WHEEL FOR WS3000

    CAD $26.95
    150mm Tempered Glass Wheel for WS3000, Work Sharp It replaces the tempered glass wheel with maximum operating speed of 650 RPM that comes with WS3000 or you can apply different grits of PSA abrasives on it to expand the capacity of your sharpening...
    WS30003
    CAD $26.95
    Add to Cart
  • TAPERING JIG FOR TABLE SAWS 24IN.
    Add to Cart

    TAPERING JIG FOR TABLE SAWS 24IN.

    CAD $38.99
    This Taper Jig was made with a durable aluminum construction and has a built in scale and is fully adjustable. It is also equipped with a backside stop to hold your material in place. Taper jig can be setup and assembled for either right or left hand use...
    B3839
    CAD $38.99
    Add to Cart
  • TALON CHUCK
    Add to Cart

    ONEWAY

    TALON CHUCK

    CAD $249.00
    2985 Talon Chuck - Oneway  The Talon chuck is designed for wood lathes with a swing of 16" or less. The chuck body is 3-1/2" and is operated with the use of a key. This will give the operator solid holding power and one-handed operation...
    2985
    CAD $249.00
    Add to Cart
  • SUPER DOVETAIL JIG KIT PORTER CABLE

    Porter Cable

    SUPER DOVETAIL JIG KIT PORTER CABLE

    CAD $299.00
    PORTER-CABLE 4216 Super Jig - Dovetail jig (4215 With Mini Template Kit) Ideal for furniture and cabinet making as the Porter Cable 4216 12-inch dovetail jig kit allows a wide variety joinery options for drawers, boxes, and furniture. This package...
    4216
    CAD $299.00
  • STEEL RULE 6IN. STAINLESS
    Add to Cart

    STEEL RULE 6IN. STAINLESS

    Now: CAD $0.41
    Was: $3.99
    Stainless Steel Rules 6" Stainless steel clearly graduated in 1/2mm and millimetres on the metric side; and 16ths, 32nds and 64ths on the imperial side. Note: B1813 is graduated only in metric
    Clearance
    B537
    Now: CAD $0.41
    Was: $3.99
    Add to Cart
  • STEEL RULE 12IN. INCH/METRIC
    Add to Cart

    STEEL RULE 12IN. INCH/METRIC

    Now: CAD $0.85
    Was: $6.99
    B2153 12" (300mm) Stainless Steel Rule This 12" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.
    Clearance
    B2153
    Now: CAD $0.85
    Was: $6.99
    Add to Cart
  • STANLEY FAT MAX 25 X 1 1/4 MEASURE TAPE 33725
    Add to Cart

    Stanley

    STANLEY FAT MAX 25 X 1 1/4 MEASURE TAPE 33725

    Now: CAD $26.99
    Was: $31.00
    33725 The STANLEY FatMax 25 ft Tape Measure is extra tough and durable thanks to industrial-grade BladeArmor coating on the first 3" and a high-impact ABS case. Features & Benefits 11' blade standout 1-1/4" wide blade for easy readability...
    33725
    Now: CAD $26.99
    Was: $31.00
    Add to Cart
  • STANLEY FAT MAX 16FT TAPE MEASURE
    Add to Cart

    Stanley

    STANLEY FAT MAX 16FT TAPE MEASURE

    Now: CAD $21.99
    Was: $26.99
    33716 STANLEY FAT MAX 16' TAPE MEASURE 33716THR These rugged and durable Stanley Fat Max 16’ tape measures (SAE) are great for use in the shop. The rugged design and comfortable ergonomic grip make them comfortable and easy to work with...
    33716
    Now: CAD $21.99
    Was: $26.99
    Add to Cart
  • STANLEY 3/4IN. X16FT STANLEY TAPE
    Add to Cart

    STANLEY 3/4IN. X16FT STANLEY TAPE

    Now: CAD $5.99
    Was: $6.87
    The STANLEY®16 ft. Tape Measure is made from high impact ABS plastic for added durability with a polymer coated tape blade to protect from wearing during use. This tape measure features easy to ready markings, including 16 in. and 19.2 in. stud...
    30495
    Now: CAD $5.99
    Was: $6.87
    Add to Cart
  • SPOKESHAVE ROUND SOLE
    Add to Cart

    SPOKESHAVE ROUND SOLE

    CAD $22.99
    Spokeshave Round Sole A tool that every shop should have. They are great for shaping tool handles, spindles, or pattern making anything that can be shaped freehand. Made of cast iron with steel blades having vertical and lateral adjustments Total length...
    B2669R
    CAD $22.99
    Add to Cart
  • SPOKESHAVE FLAT SOLE
    Add to Cart

    SPOKESHAVE FLAT SOLE

    CAD $22.99
    Spokeshave Flat Sole A tool that every shop should have. They are great for shaping tool handles, spindles, or pattern making anything that can be shaped freehand. Made of cast iron with steel blades having vertical and lateral adjustments Total length...
    B2669F
    CAD $22.99
    Add to Cart
  • SPARE BLADE FOR SEIUNSAKU 270MM B4128
    Add to Cart

    Razor Saw

    SPARE BLADE FOR SEIUNSAKU 270MM B4128

    CAD $42.99
    Replacement Blade for Gyokucho Seiun Saku TPE Handsaw Ryoba. (B4128) Specifications: 10-3/4" Double Edge Razor SawBlade Length: 10-3/4"For: B4128 Made in Japan  
    B4128B
    CAD $42.99
    Add to Cart
  • SPARE BLADE FOR SEIUNSAKU 240MM B4127
    Add to Cart

    Razor Saw

    SPARE BLADE FOR SEIUNSAKU 240MM B4127

    CAD $34.99
    Replacement Blade for Gyokucho Seiun Saku TPE Handsaw Ryoba. (B4127) Specifications: Blade length: 9-1/2"Cross-cut: 14 tpi; Rip: 7 tpiReplacement for: B4127 Made in Japan
    B4127B
    CAD $34.99
    Add to Cart
  • SPARE BLADE FOR SEIUN 240MM KOMAME B3732B
    Add to Cart

    Razor Saw

    SPARE BLADE FOR SEIUN 240MM KOMAME B3732B

    CAD $39.99
    B3732B This is a replacement Japanese saw blade for Gyokucho Seiun 240mm Koname Saw (B3732). It can be used for the purpose of vertical cutting or horizontal cutting, and has a professionally sharp blade. Most importantly it well balanced as weight is...
    B3732B
    CAD $39.99
    Add to Cart
  • SPARE BLADE FOR POWERSAW IBARAME B4126
    Add to Cart

    Razor Saw

    SPARE BLADE FOR POWERSAW IBARAME B4126

    CAD $26.99
    Replacement Blade for B4126 (400) GYOKUCHO Proton Power Ibareme 240mm Saw Specifications: Blade Length: 240mmBlade Thickness: 0.6mmCutting Width: 0.90mmTeeth Pitch: 1.9mm Made in Japan  
    B4126B
    CAD $26.99
    Add to Cart
  • SPARE BLADE FOR DOZUKI TATEBIKI B4124
    Add to Cart

    Razor Saw

    SPARE BLADE FOR DOZUKI TATEBIKI B4124

    CAD $46.99
    Replacement Blade for B4124 (372) GYOKUCHO Razor Saw Dozuki Tatebiki Specifications: Blade Length: 240mmBlade Thickness: 0.3mmCutting Width: 0.46mmTeeth Pitch: 1.0mm Made in Japan  
    B4124B
    CAD $46.99
    Add to Cart
  • SORBY TURNMASTER WITH CARBIDE CUTTERS
    Add to Cart

    Robert Sorby

    SORBY TURNMASTER WITH 3 CARBIDE CUTTERS

    CAD $210.99
    RSTMHCT123 TurnMaster Handled with Detail Point, Round and Square Tungsten Carbide Cutters - Robert Sorby FEATURES: 3 Tungsten Carbide Cutters; Detail Point, Round and Square All cutters interchangeable with one tool Indexable, patented cutting head...
    RSTMHCT123
    CAD $210.99
    Add to Cart
  • SMOOTHING PLANE NO. 4 9 3/4IN. LONG
    Add to Cart

    Groz

    SMOOTHING PLANE NO. 4 9 3/4IN. LONG

    CAD $63.99
    9 3/4" Smoothing Plane - GROZ Constructed with fine-grained cast iron and sculptured wood hand rests. The 2" plane iron of high quality steel is easily adjusted and securely held for the best in hand planing. A life time product for the wood craftsman...
    SP4
    CAD $63.99
    Add to Cart
  • SHOCKLESS HAMMER 2 LB
    Add to Cart

    SHOCKLESS HAMMER 2 LB

    CAD $16.99
    Shockless Hammer - 2lb. With cast urethane head and tubular steel handle with nonslip rubber grip. Does not bounce.
    B006
    CAD $16.99
    Add to Cart
  • SHARPENING GUIDE 2 IN 1
    Pre-Order Now

    SHARPENING GUIDE 2 IN 1

    CAD $29.99
    Sharpening Guide 2 in 1 Easy to use on both the grinder and the hone Sharpen hand chisel and plane blades on this guide Scale on guide gives accurate 30 degree setting, guide takes up to 2 5/8" wide blades
    B1858
    CAD $29.99
    Pre-Order Now
  • SCREW PITCH GAUGE TP14 42
    Add to Cart

    SCREW PITCH GAUGE TP14 42

    CAD $18.99
    Screw Pitch Gauges Features Made of tempered steel and are precision ground T.P.I. stamped on each blade All blades can be locked to any desired position Number of blades: 30 TPI: 4-42
    B576
    CAD $18.99
    Add to Cart
  • SCRAPER SET 6 PC
    Add to Cart

    ROK

    SCRAPER SET 6 PC

    Now: CAD $11.99
    Was: $15.99
    B3399 3 Piece, Scraper Set Removes tool marks Prepares wood surfaces for finishing Smoother than sanding; wood fibers and are shaved creating a silk smooth finish 6 Pieces Scraper Set: Heavy Cutting Medium Cutting Concave, Convex Bevelled Edge Fine...
    B3399
    Now: CAD $11.99
    Was: $15.99
    Add to Cart
  • SCRAPER CABINET 6IN. SORBY
    Add to Cart

    SCRAPER CABINET 6IN. SORBY

    CAD $13.99
    Cabinet Scrapers - "Robert Sorby" Rect. 6" x 3" Made of the finest steel. Cabinet scrapers, when properly sharpened and burnished produce a finish not available with either a plane or sandpaper. Invaluable to the cabinetmaker.
    1606
    CAD $13.99
    Add to Cart
  • SCALE MITER GAUGE
    Add to Cart

    SAWSTOP

    SCALE MITER GAUGE

    CAD $339.00
    SAWSTOP Scale Miter Gauge Engineered to bring can’t-miss accuracy to any table saw, the Scale Miter Gauge (SMG) features a protractor head with a pointer-and-notch alignment mechanism that locks in 181 precise angles. Anchor that to a premium...
    TSASMG
    CAD $339.00
    Add to Cart
  • SCALE 6IN. STAINLESS STEEL
    Add to Cart

    SCALE 6IN. STAINLESS STEEL

    CAD $4.49
    B3097 6" (150mm) Stainless Steel Scale This 6" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.
    B3097
    CAD $4.49
    Add to Cart
  • SAW STEP GAUGE
    Add to Cart

    SAW STEP GAUGE

    CAD $9.99
    Saw Step Gauge Heavy Gauge Aluminum Our step gauge gives you an exact setting, the first time, regardless of width or set of the blade. More accurate than any ruler. It will set your rip fence, your radial or table saw depth of cut and measure groove...
    B897
    CAD $9.99
    Add to Cart

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley