Wood Turning Chisels

Replacement Cutter For Model 855H - Hollowing Tool 20" By Robert Sorby H.S.S.

Ring Tool 1/2" By Robert Sorby H.S.S. The dual bevels allow for hollowing of internal curved surfaces. Ideal for goblets and egg cups

1 1/4'' Roughing Out Gouge By Robert Sorby H.S.S. An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out...

3/4'' Roughing Out Gouge An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out to spindle work can be...

Fingernail Profile Gouges 3/8" Bowl Gouge (Long Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground fingernail profile, which is not only safe in use, but also allows the turner to...

842FLH12 Bowl Gouge by Robert Sorby- 1/2" - 23" Length Deep fluted to allow heavy cuts to be taken. This tool is used over on its side (about 15-20m off the vertical) with the flute pointing in the direction of the cut. It is important to let the...

Fingernail Profile Gouges - 3/8" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the...

Fingernail Profile Gouges - 1/2" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the...

3/16" H.S.S Bead Forming Chisel - Robert Sorby These tools provide the means of forming perfect beads from 1/8" to 1/2". The nose design permits multiple beads to be cut with precision on spindle for faceplate work. Slight movement of the...

835H18 1/8" H.S.S Bead Forming Chisel - Robert Sorby These tools provide the means of forming perfect beads from 1/8" to 1/2". The nose design permits multiple beads to be cut with precision on spindle for faceplate work. Slight movement...

2 mm Parting Tool Fluted 18" long Used with flute downwards. This tool gives an exceptionally good finish even when parting through end grain. Sides taper ground for clearance. High Speed Steel

830H18 1/8" H.S.S Parting Tool Chisel - Robert Sorby 1/8" Parting Tool (Standard) 17" Long High Speed Steel

Curved Scraper - Robert Sorby The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an aggressive cut, whilst retaining...

82HS Professional Wood Turning Chisel Set Standard set of 8pc: 1 - 3/4" Roughing Gouge 1 - 1/4'' Spindle Gouge 1 - 1/2" Spindle Gouge 1 - 3/8" Bowl Gouge 1 - 1/2" Round Nose Scraper 1 - 1" Square Nose Scraper 1 - 3/4" Skew Chisel 1- 3-16" Parting...

52HS Professional Wood Turning Chisel Set Standard set of 5pcs 1 - 3/4'' Roughing Gouge 1 - 3/8'' Spindle Gouge 1 - 1/2" Round Nose Scraper 1 - 1/2" Skew Chisel 1 - 1/8'' Parting Tool Approx. Length: 14'' Overall Length

410 Sand Master - ROBERT SORBY To put a fine finish on turning work and eliminate sanding lines. Velcro 2" sponge pad mounted on phosphor bronze bearing gives excellent service. Total Length: 11-1/2" Handle: 8-1/2"

High Speed Steel 3 pc Pen Turning Set Set Contains: -5 /16" roughing gouge, (model # 866H) -1/16" parting tool, (model # 865H) -1 /2" spindle master, (model # 879H) (All chisels are 10" long)

Cabinet Scrapers - "Robert Sorby" Rect. 6" x 3" Made of the finest steel. Cabinet scrapers, when properly sharpened and burnished produce a finish not available with either a plane or sandpaper. Invaluable to the cabinetmaker.

2" Velcro Sanding Pad By Robert Sorby May be used with the "Sand Master" or separately Available - 2" Velcro Sponge Discs - 10 Per Pack Model Grit RS412A60 60 RS412A120 120 RS412A180 180 RS412A240 240

by "Robert Sorby" of England Hollow Master 3pc Set H.S.S. A full 3/4" surface gives ample support and prevents the tool from turning over Comes with a swiveling hollowing cutter and a full round scraper cutter Total length: 21" RS230C Replacement...