null

Accessories

Accessories

  • 32IN. UNDER TABLE CABINET
    Add to Cart

    SAWSTOP

    32IN. UNDER TABLE CABINET

    CAD $939.00
    32” Under Table Cabinet Complete your workshop with a SawStop Under Table Cabinet (UTC) designed to fit perfectly beneath your SawStop cast-iron table saw. The 32” width fits a variety of SawStop table saw configurations*. Five drawers...
    TSAUTC32
    CAD $939.00
    Add to Cart
  • 18IN. UNDER TABLE CABINET
    Add to Cart

    SAWSTOP

    18IN. UNDER TABLE CABINET

    CAD $669.00
    18” Under Table Cabinet SAWSTOP Complete your workshop with a SawStop Under Table Cabinet (UTC) designed to fit perfectly beneath your SawStop cast-iron table saw. The 18” width fits a variety of SawStop table saw configurations*. Five...
    TSAUTC18
    CAD $669.00
    Add to Cart
  • SCALE MITER GAUGE
    Add to Cart

    SAWSTOP

    SCALE MITER GAUGE

    CAD $339.00
    SAWSTOP Scale Miter Gauge Engineered to bring can’t-miss accuracy to any table saw, the Scale Miter Gauge (SMG) features a protractor head with a pointer-and-notch alignment mechanism that locks in 181 precise angles. Anchor that to a premium...
    TSASMG
    CAD $339.00
    Add to Cart
  • REVOLUTION MITER GAUGE
    Add to Cart

    SAWSTOP

    REVOLUTION MITER GAUGE

    CAD $599.00
    SAWSTOP Revolution Mitre Gauge Saw Stop’s Revolution Miter Gauge is built around a mitre gauge head with an innovative and intuitive dial adjustment to fine-tune the angle. Settings are precise, reliable, and repeatable. Furthermore, setup and...
    TSARMG
    CAD $599.00
    Add to Cart
  • ZEROPLAY MITER BAR 2 PACK MICROJIG
    Add to Cart

    Microjig

    ZEROPLAY MITER BAR 2 PACK MICROJIG

    CAD $55.99
    Calibrate your miter bar quickly and accurately from above the sled. ZeroPlay Miter Bars are adjusted to fit the miter slot while it is attached to your sled, allowing you to get the best fit possible. Just set, test, and adjust if needed, then begin...
    ZP750B2S2
    CAD $55.99
    Add to Cart
  • GRABBER PRO MILESCRAFT
    Add to Cart

    Milescraft

    GRABBER PRO MILESCRAFT

    CAD $54.99
    GrabberPRO™ is the ultimate adjustable push block. Ideal for use on table saws, router tables, jointers, and even band saws. Designed with control, precision, and safety in mind! The multi-leg design allows the GrabberPRO™ to pass over both...
    3406
    CAD $54.99
    Add to Cart
  • SAW STOP ZERO CLEAR INSERT COMPACT TABLE
    Add to Cart

    SAWSTOP

    SAW STOP ZERO CLEAR INSERT COMPACT TABLE

    CAD $34.00
    The Standard table saw insert is specifically engineered for the SawStop 10” Compact Table Saw. This zero-clearance insert is for accurate cuts and reduce tear out. One push lockdown allows for tool-free operation and easy install. Engineered...
    CTSTSI
    CAD $34.00
    Add to Cart
  • SAWSTOP BRAKE CARTRIDGE 8IN. DADO BLADES
    Add to Cart

    SAWSTOP

    SAWSTOP BRAKE CARTRIDGE 8IN. DADO BLADES

    CAD $169.00
    Dado brake cartridge stops the spinning blades on contact with skin reducing the chances of a catastrophic injury. Dado cartridges for 8" Dado sets. Features Compatible with all standard 8" dado sets up to 13/16" thickCompatible with all woods and...
    TSDC8R3
    CAD $169.00
    Add to Cart
  • SAW STOP FOUR POST ROUTER LIFT WITH LOCK
    Add to Cart

    SAWSTOP

    SAW STOP FOUR POST ROUTER LIFT WITH LOCK

    CAD $751.00
    Built for heavy-duty precision, the SawStop Router Lift features a chain-synchronized four-post lifting system, positive lock, precision above-table elevation measurement and adjustments, and adaptive collars to fit multiple router sizes. 9.25" x 11.75"...
    RTLFT
    CAD $751.00
    Add to Cart
  • SAW STOP DOWNDRAFT DUST COLLECTION BOX
    Add to Cart

    SAWSTOP

    SAW STOP DOWNDRAFT DUST COLLECTION BOX

    CAD $261.00
    Engineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangeable panels for optimum dust port and Vent placement. Plug the 2...
    RTDCB
    CAD $261.00
    Add to Cart
  • CARTRIDGE BRAKE FOR 10IN. BLADES SAW STOP
    Add to Cart

    SAWSTOP

    CARTRIDGE BRAKE FOR 10IN. BLADES SAW STOP

    CAD $139.00
    SawStop standard 10" brake cartridge TSBC-10R2 for use with SawStop industrial, contractor, and professional table saws (not compatible with older CB model saws).
    TSBC10R3
    CAD $139.00
    Add to Cart
  • SAW STOP 30IN. IN LINE CAST IRON ROUTER
    Add to Cart

    SAWSTOP

    SAW STOP 30IN. IN LINE CAST IRON ROUTER

    CAD $1,211.00
    Optimize your SawStop saw with this In-Line Router Table Assembly. On a Professional Cabinet Saw, replace your extension table with beautiful cast iron. On a Professional or Contractor Saw, install to the left of the saw. Includes a 27" x 16" precision...
    RTTGI
    CAD $1,211.00
    Add to Cart
  • SAW STOP 4 PC PHENOLIC INSERT RING SET
    Add to Cart

    SAWSTOP

    SAW STOP 4 PC PHENOLIC INSERT RING SET

    CAD $131.00
    4 pc Phenolic Insert Ring Set for Router Plates. These phenolic inserts are graduated in size for quick-change versatility. Specifications: Actual dimensions: 3 3/4" w, 3 3/4" d, 1 1/4" hUltra-strong phenolic core material to reduce tear-out and chip...
    RTPIR
    CAD $131.00
    Add to Cart
  • SAW STOP FLIP STOP FOR ROUTER FENCE
    Add to Cart

    SAWSTOP

    SAW STOP FLIP STOP FOR ROUTER FENCE

    CAD $47.00
    Designed to fit SawStop RT Fence Assemblies, this flip stop is built to facilitate repeated cuts with precision. Features: Designed to quickly give you accurate, repeatable measurementsCompatible with all SawStop Router FencesTop-mounted dovetail track...
    RTFLS
    CAD $47.00
    Add to Cart
  • SAW STOP 27IN. X 16IN. CAST IRON TABLE FOR
    Add to Cart

    SAWSTOP

    SAW STOP 27IN. X 16IN. CAST IRON TABLE FOR

    CAD $498.00
    This 27" cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Features: Actual dimensions: 27" w, 16" d, 1 1/2" hMaximize your shop space with the in-line...
    RTC27
    CAD $498.00
    Add to Cart
  • SAW STOP INDUSTRIAL MOBILE BASE MBIND000
    Add to Cart

    SAWSTOP

    SAW STOP INDUSTRIAL MOBILE BASE MBIND000

    CAD $579.00
    Supports saw and extension table, no additional extension hardware needed, 1000 lb capacity, no flimsy wheel brakes, non-marring polyurethane wheels, when disengaged the saw rests firmly on the ground distributing weight directly to the floor, not the...
    MBIND000
    CAD $579.00
    Add to Cart
  • 3/8IN. FENCE FLIP STOP
    Add to Cart

    3/8IN. FENCE FLIP STOP

    CAD $27.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4152
    CAD $27.99
    Add to Cart
  • 1/4IN. FENCE FLIP STOP
    Add to Cart

    1/4IN. FENCE FLIP STOP

    CAD $27.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4151
    CAD $27.99
    Add to Cart
  • LONG SAFETY PUSH STICK
    Add to Cart

    LONG SAFETY PUSH STICK

    CAD $9.99
    B3261 Large Safety Push Stick This strong rigid push stick is suitable for use with many machines, keeping your  hand safely away from the cutting tools. Made from solid plastic, with convenient hanger.
    B3261
    CAD $9.99
    Add to Cart
  • SAWSTOP JOBSITE SAW DADO ZERO CLEARANCE
    Pre-Order Now

    SAWSTOP

    SAWSTOP JOBSITE SAW DADO ZERO CLEARANCE

    CAD $49.00
    Jobsite Saw Dado Inserts for 8in. Dado Set Engineered for the SawStop Jobsite Saw. Zero Clearance for Accurate Cuts and Reduced Tearout One push lockdown allows for tool-free operation Positioning screws ensure a solid and precise fit in the...
    TSIDJB
    CAD $49.00
    Pre-Order Now
  • SAWSTOP FLOATING OVERARM DUST COLLECTION
    Add to Cart

    SAWSTOP

    SAWSTOP FLOATING OVERARM DUST COLLECTION

    CAD $749.00
    This heavy-duty 4” overarm is designed to provide operator protection while removing table-top dust in both standard and non-through cuts. The transparent blade cover is engineered to lift easily for quick blade access, and the rigid steel overarm...
    TSGFDC
    CAD $749.00
    Add to Cart
  • SAWSTOP LARGE SLIDING TABLE
    Add to Cart

    SAWSTOP

    SAWSTOP LARGE SLIDING TABLE

    CAD $2,368.00
    Engineered for the demands of the Industrial woodshop, the Large Sliding Table ensures easy, repeatable operation. Cut sheet goods and larger stock easily, with maximum control and sure measurement. A rigid steel frame and 14 sealed, steel bearings...
    TSASA70
    CAD $2,368.00
    Add to Cart
  • SAW STOP STANDARD TABLE SAW INSERT
    Add to Cart

    SAWSTOP

    SAW STOP STANDARD TABLE SAW INSERT

    CAD $80.00
    This SawStop standard lock down insert FOR 10" blades (TSI-SLD) can be used on SawStop table saws (excluding JSS) using 10" saw blades enabling the user to lock the insert into the table top without the use of tools. Precision machined from a...
    TSISLD
    CAD $80.00
    Add to Cart
  • SAW STOP ZERO CLEAR DADO TABLE SAW INSERT
    Add to Cart

    SAWSTOP

    SAW STOP ZERO CLEAR DADO TABLE SAW INSER

    CAD $80.00
    Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface  Positioning screws ensure a solid and precise fit in the table  Positive...
    TSIDLD
    CAD $80.00
    Add to Cart
  • SAW STOP DUST COLLECTING BLADE GUARD ASS
    Add to Cart

    SAWSTOP

    SAW STOP DUST COLLECTING BLADE GUARD ASS

    CAD $222.00
    Dust Collection Blade Guard. Upgrade your Cast-Iron Saw with above-table dust collection. Attaches directly to your dust collection system. Features: Provides protection around the blade and collects above-table dust, reducing the chance of injury and...
    TSGDC
    CAD $222.00
    Add to Cart
  • SAW STOP SLIDING CROSSCUT ATTACHMENT
    Add to Cart

    SAWSTOP

    SAW STOP SLIDING CROSSCUT ATTACHMENT

    CAD $1,920.00
    Engineered and finished to fit your SawStop Contractor, Professional Cabinet or Industrial Cabinet Saw, the Sliding Crosscut Table is the finest quality crosscut table available. It delivers repeatable, accurate results with ease and beauty...
    TSASA48
    CAD $1,920.00
    Add to Cart
  • SAW STOP OVERARM DUST COLLECTION ASSEMBL
    Add to Cart

    SAWSTOP

    SAW STOP OVERARM DUST COLLECTION ASSEMBL

    CAD $399.00
    Remove Dust Up and Out Of the Way. Connects directly to SawStop's dust collection blade guard. Features: Fits all SawStop T-Glide rail systems. Custom Y-Port unites above and below-table dust collection into one 4" port. Compatible with all SawStop...
    TSAODC
    CAD $399.00
    Add to Cart
  • SAW STOP FOLDING OUTFEED TABLE
    Add to Cart

    SAWSTOP

    SAW STOP FOLDING OUTFEED TABLE

    CAD $579.00
    Engineered from steel for maximum carrying capacity, the outfeed table is sized to match the width of your cast iron table and wings. The table is designed for easy adjustability and maximum glide, with strategically-placed rollers for smooth operation...
    TSAFOT
    CAD $579.00
    Add to Cart
  • 27IN. IN LINE CAST IRON ROUTER TABLE FOR P
    Add to Cart

    SAWSTOP

    27IN. IN LINE CAST IRON ROUTER TABLE FOR P

    CAD $929.00
    ***SPECIAL ORDER PLEASE ALLOW 2 TO 4 WEEKS FOR DELIVERY*** Get the most out of your SawStop saw with this In-Line Router Table Assembly. This model is for use with any Professional Cabinet saw or Contractor Cabinet saw. On a Professional Cabinet Saw...
    RTTGP
    CAD $929.00
    Add to Cart
  • MOBILE BASE FOR SAW STOP PRO CABINET SAW
    Add to Cart

    SAWSTOP

    MOBILE BASE FOR SAW STOP PRO CABINET SAW

    CAD $399.00
    Easily move your saw around your shop. Fully welded 1/4" rigid steel construction, hard wearing black powder coat finish. Features: Durable polyurethane wheels :Two fixed-direction wheels, Two 360° casters for easy positioning. Easy one-foot...
    MBPCS000
    CAD $399.00
    Add to Cart
  • SAW STOP INDUSTRIAL MOBILE BASE ASSEMBLY
    Add to Cart

    SAWSTOP

    SAW STOP INDUSTRIAL MOBILE BASE ASSEMBLY

    CAD $619.00
    Supports saw and extension table, no additional extension hardware needed, 1000 lb capacity, no flimsy wheel brakes, non marring polyurethane wheels ,when disengaged the saw rests firmly on the ground distributing weight directly to the floor, not the...
    MBPCSIND
    CAD $619.00
    Add to Cart
  • MOBILE BASE FOR CONTRACTOR SAW STOP
    Add to Cart

    SAWSTOP

    MOBILE BASE FOR CONTRACTOR SAW STOP

    CAD $329.00
    Easily move your saw around your shop. Fully welded 1/4" rigid steel construction, hard wearing black powder coat finish. Features: Durable polyurethane wheels:Two fixed-direction wheels, Two 360° casters for easy positioning. Easy one-foot...
    MBCNS000
    CAD $329.00
    Add to Cart
  • EXTENSION TABLE FOR CX212 TABLE SAW CX212EXT
    Add to Cart

    Craftex CX Series

    EXTENSION TABLE FOR CX212 TABLE SAW CX212EXT

    CAD $269.00
    EXTENSION TABLE FOR CX212 TABLE SAW     Large 27” x 39-3/4” black laminated 5/8” HDF extension table manufactured specifically for our CX212 table saw, with pre-drilled mounting holes and hardware. The CX212EXT...
    CX212EXT
    CAD $269.00
    Add to Cart
  • OVERARM BLADE GUARD SYSTEM CX SERIES
    Add to Cart

    Craftex CX Series

    OVERARM BLADE GUARD SYSTEM CX SERIES CXARM

    Now: CAD $599.00
    Was: $649.00
    CXARM  Over Arm Blade Guard System Craftex CX-Series Add safety and dust collection to your table saw with this Over Arm Blade Guard.  This floor standing unit will fit just about any table saw and comes with an extra support bracket that...
    CXARM
    Now: CAD $599.00
    Was: $649.00
    Add to Cart
  • FEATHER BOARD DOUBLE MILESCRAFT
    Add to Cart

    Milescraft

    FEATHER BOARD DOUBLE MILESCRAFT

    CAD $39.99
    1407 Double Tandem Feather Board Great for table saws & router tables this tool is ideal for dual applications. Can be used as 1 piece or 2. Two feather boards ¾" & 5/8" miter bars and T-slot bolts Includes spacer for tandem use Dual slide motion...
    1407
    CAD $39.99
    Add to Cart
  • FEATHER BOARD MILESCRAFT
    Add to Cart

    Milescraft

    FEATHER BOARD MILESCRAFT

    CAD $19.99
    Feather Board from Milescraft A unique and very effective feather board features Dual Slide Motion for quick and easy set up. Unique pre-load tension design for consistent tension Split-rail miter bars provide maximum hold S style knobs prevent over...
    1406
    CAD $19.99
    Add to Cart
  • MITER GAUGE 1000HD WITH 18IN. TO 30IN.
    Add to Cart

    Incra

    MITER GAUGE TELESCOPING FENCE 18IN. TO 31IN.

    CAD $332.00
    MITER1000HD Miter Gauge 1000 High Definition - INCRA The NEW INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition; because the protractor plate's exclusive AngleLOCK Indexing System has a...
    MITER1000HD
    CAD $332.00
    Add to Cart
  • MITER GAUGE WITH 120 ANGLELOCK STOPS
    Add to Cart

    Incra

    MITER GAUGE WITH 120 ANGLELOCK STOPS

    CAD $156.99
    Miter Gauge V120 - INCRA The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two...
    MITERV120
    CAD $156.99
    Add to Cart
  • SWING STOP KREG
    Add to Cart

    Kreg

    SWING STOP KREG

    CAD $59.99
    KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.
    KMS7801
    CAD $59.99
    Add to Cart
  • ROUTER BIT DEPTH GAUGE
    Add to Cart

    ROUTER BIT DEPTH GAUGE

    CAD $13.99
    Router Bit Depth Gauge You're all set to rout V-groove into a piece of expensive stock. How can you be sure the depth you've set is the depth the router will cut? Simple. Check it with this handy router depth gauge. The guide is clearly marked in 16ths...
    B1309
    CAD $13.99
    Add to Cart

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley