Hardened and ground gears are featured in the headstock and gearbox
D 1 - 4 spindle is precision ground for accuracy and supported by high quality
tapered roller bearings
V-way bed is induction hardened and ground
Gap bed section
Splined, not keyed, shafts are utilized in the headstock
Gearbox gives large threading and feed capabilities with no gear changes
Independent leadscrew and feed rod
Compound and cross slide has backlash elimination
Spindle actuation control is apron mounted
Inch/metric dials are standard
Heavy-duty cabinet stand
6" 3-jaw direct mount chuck with top reversing jaw
8" 4-jaw direct mount chuck with d 1 - 4 back plate
12" face plate
4-way turret tool post
Steady and follow rest
Micro bed stop
Front removable chip tray
Spindle jog button
Coolant system with splash guard
Tool box with tools
Auto switch-off chuck cover
Swing over bed: 14"
Swing over cross slide: 8 5/8"
Swing through gap: 19 1/2"
Distance between centres: 40"
Spindle bore: 1 1/2"
Spindle mount: D 1 - 4
Taper of spindle bore: MT5
Number of spindle speeds: 8
Range of spindle speeds: 90 - 1800 RPM
No. of longitudinal and cross feeds: 40
Range of longitudinal feeds (rev.): .0012" - .0294"
Range of cross feeds (rev.): .0003" - .0100"
No. of range of metric thread: 22 (0.45 - 7.5mm)
No. of range of inch thread: 40 (4 - 112 TPI)
Max. compound slide travel: 3 1/2"
Max. cross slide travel: 6"
Tailstock spindle taper: MT3
Main motor: 3 HP, 220V, 1 phase
Overall dimensions (LxWxH): 71 3/4" x 31" x 48 5/8"
Gross weight: 980kg.