Description
Create special jigs, positioners and hold-downs to suit your work and save
hours of set-up
time. Each set includes one track and hold-downs. Each hold-down includes a
knob and
1/4"-20 sliding bolt. Hold-downs work from 0" to 2 1/2" thick.
6 Reviews
-
good track
the track is solid and good quality, the hold downs are cheap and do not work smoothly, ok for occasional use
-
TRACK T 24IN. ALUMINIUM WITH 2 HOLD DOWN
works great for the project i am doing
-
Good Value
Great track and hold down. Minus one star for not specifying that the bar is 1/2" thick, not the standard 3/8. Too thick to comfortably use in 3/4" stock but otherwise fine.
-
Average
Bought two when they were on sale. Very inconsistent results. Quality control just isnt there. The aluminum is sharp and rough. Will require filing to smooth out those sharp edges. One of the hold downs has a different bend angle. I recommend getting the red t-tracks as they are thinner and better quality. And seperate hold downs like the blue ones on the site.
-
Works great
Wrote this review because after reading this and buying mine sounds like the last review/poster got a damaged part which he/she didnt bother trying to return or reconcile with busy bee. Mine all work fine, no issues at all. I would recommend this.
-
Absolute garbage, spend a little more and get the blue one
Brought it home, opened up the bag, and it looks like the t track has been beaten with a hammer, and scratched to oblivion. There are 2 big gouges out of the track as well. The bolts that are supposed to run in the track are way too small, that only 1 side of the bolt actually grabs the rail. Worst product ever. Not worth the drive to return it. Should have known better.
