Joint Making Bits

Joint Making Bits

  • R/BIT DRAWER LOCK 1 1/4IN. X1/2IN. X1/4IN. SHANK

    Craftex Blue Tornado

    R/BIT DRAWER LOCK 1 1/4IN. X1/2IN. X1/4IN. SHANK

    $29.69
    Drawer Lock Bit Gives very strong joint between drawer side and drawer front. Increased glue area improves holding power. Use only with Router Table. Dia: 1 1/4" Cutting Length: 1/2" Angle: 15 degree Shank Dia: 1/4" Total Length: 1 27/32" Blue...
    805318C
    $29.69
    Add to Cart
  • R/BIT GLUE JOINT 1 1/2IN. X1 1/4IN. X1/2IN. SHANK

    Craftex Blue Tornado

    R/BIT GLUE JOINT 1 1/2IN. X1 1/4IN. X1/2IN. SHANK

    $47.99
    Reversible Glue Joint Bit This bit is used to join stock to make wide panels. Align the bit to center and reverse each board for the perfect glue joint. For use with router table. Dia: 1 1/2" Cutting Length: 1 1/4" Angle: 30 degree Shank Dia: 1/2"...
    797381C
    $47.99
    Pre-Order Now
  • R/BIT L/MITRE D2IN. XH7/8IN. XL2 11/16IN. X1/2IN. S

    Craftex Blue Tornado

    R/BIT L/MITRE D2IN. XH7/8IN. XL2 11/16IN. X1/2IN. S

    $49.99
    807508A This lock miter bit gives a strong 90-degree lock miter joint. Run one board vertically and the other end horizontally in one set up. Used only with router table. Sizes Diameter (D): 2" Cutting Length (H): 7/8" Angle (A): 45 degree Shank...
    807508A
    $49.99
    Add to Cart
  • R/BIT L/MITRE 1 3/8IN. X 1/2IN. X 1/4IN. SHANK

    Craftex Blue Tornado

    R/BIT L/MITRE 1 3/8IN. X 1/2IN. X 1/4IN. SHANK

    $37.50
    Lock Miter Bit This bit gives a superior 90 degree lock miter joint. Run one board vertically and then the other horizontally in one set up. Use only with Router Table. Dia: 1 3/8" Cutting Length: 1/2" Shank Dia: 1/4" Total Length: 2 5/8" Blue...
    805381A
    $37.50
    Add to Cart
  • R/BIT FINGER JOINT 1 5/8IN. X1/16IN. X1/2IN. SHNK

    Craftex Blue Tornado

    R/BIT FINGER JOINT 1 5/8IN. X1/16IN. X1/2IN. SHNK

    $83.99
    237420A Finger Joint Bit Ideal for decorative corner joints on jewelry boxes etc. Maximum board thickness with one pass, 40mm. Use with router table only. Cutting Dia - 1 5/8" Cutting Length - 2/32" Cutting Depth - 3/8" Overall Length - 4 7/32" Shank...
    237420A
    $83.99
    Add to Cart
  • R/BIT DRAWER LOCK 2IN. X1/2IN. X1/2IN. SHANK

    Craftex Blue Tornado

    R/BIT DRAWER LOCK 2IN. X1/2IN. X1/2IN. SHANK

    $45.29
    Drawer Lock Bit Very strong joint between drawer side and drawer front. Increased glue area improves holding power. Use only with Router Table. Dia: 2" Cutting Length: 1/2" Angle: 15 degree Shank Dia: 1/2" Total Length: 2 1/8" Blue Tornado bits are...
    807508C
    $45.29
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley