null

Hand Tools

Hand Tools

  • MITRE GAUGE V27 INCRA
    Add to Cart

    Incra

    MITRE GAUGE V27 INCRA

    CAD $102.99
    INCRA MITER GAUGE V27 The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter...
    MITER27
    CAD $102.99
    Add to Cart
  • TEMPERED GLASS WHEEL FOR WS3000
    Add to Cart

    WorkSharp

    TEMPERED GLASS WHEEL FOR WS3000

    CAD $26.95
    150mm Tempered Glass Wheel for WS3000, Work Sharp It replaces the tempered glass wheel with maximum operating speed of 650 RPM that comes with WS3000 or you can apply different grits of PSA abrasives on it to expand the capacity of your sharpening...
    WS30003
    CAD $26.95
    Add to Cart
  • 10IN. DIGITAL RULE AND PROTRACTOR IGAGING
    Add to Cart

    Igaging

    10IN. DIGITAL RULE AND PROTRACTOR IGAGING

    CAD $31.99
    ÿþB3128 10" Rule and 8" Digital Protractor - iGaging Stainless steel rule blades with mm and 1/64 , 1/32 and 1/64 scales Strong/firm lock Hold function Reversible reading Inside & Outside angle measure Easy to use & easy to carry Light...
    B3128
    CAD $31.99
    Add to Cart
  • MITER EXPRESS INCRA
    Add to Cart

    Incra

    MITER EXPRESS INCRA

    CAD $259.00
    MITEREXPRESS INCRA MITER GAUGE EXPRESS The NEW Incra Miter Express Makes Safe and Easy Mitered Cuts Incra's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Turn any miter...
    MITEREXPRESS
    CAD $259.00
    Add to Cart
  • DRILL BLOCK IMPERIAL MILESCRAFT
    Add to Cart

    Milescraft

    DRILL BLOCK IMPERIAL MILESCRAFT

    CAD $10.99
    1312 Drill Block - MILESCRAFT DrillBlock ™ allows you to drill straight holes every time. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. The inserted solid metal guide offers the six common drill...
    1312
    CAD $10.99
    Add to Cart
  • PRECISION MARKING RULE 12IN. INCRA
    Add to Cart

    Incra

    PRECISION MARKING RULE 12IN. INCRA

    CAD $20.99
    INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE12
    CAD $20.99
    Add to Cart
  • VARI GRIND ATTACHMENT LARGE TOOLS
    Add to Cart

    ONEWAY

    VARI GRIND ATTACHMENT LARGE TOOLS

    CAD $57.00
    This Jig is designed to be used with the Wolverine Grinding Jig. For ½" to 1-1/8" dia. Tools. Oneway's optional Vari-grind attachment for gouges. It works with the V-arm to provide perfect control for grinding almost any bevel shape from slight...
    3074
    CAD $57.00
    Add to Cart
  • TRACK CLAMP KREG
    Add to Cart

    Kreg

    TRACK CLAMP KREG

    CAD $30.99
    KMS7520 Track Clamp – KREG Track Clamps from Kreg make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy to use clamps lock into place on the underside of the Accu-Cut track and starting block to offer additional...
    KMS7520
    CAD $30.99
    Add to Cart
  • KREG POCKET HOLE JIG 720 PRO
    Add to Cart

    Kreg

    KREG POCKET HOLE JIG 720 PRO

    CAD $206.00
    Build pocket-hole projects faster than ever with the ultimate jigThe Pocket-Hole Jig 720PRO is the ultimate joining set up from Kreg® with features that make project building incredibly efficient. It’s the premium choice for project builders...
    KPHJ720PRO
    CAD $206.00
    Add to Cart
  • SALAD BOWL FINISH CLAPHAMS 7 OZ.
    Add to Cart

    Claphams

    SALAD BOWL FINISH CLAPHAMS 7 OZ.

    CAD $24.99
    B158909 8 Oz Beeswax Salad Bowl Finish Finish - CLAPHAM'S Our food-grade Beeswax/Carnauba/Mineral oil finish is suitable for all things wooden in the kitchen. The finish protects the wood and gives it a soft lustrous shine. It is suitable for salad...
    B158909
    CAD $24.99
    Add to Cart
  • GAUGE SCREW CUTTING
    Add to Cart

    Groz

    GAUGE SCREW CUTTING

    CAD $9.99
    Gauge Screw Cutting Made from stainless steel in satin chrome finish. Permanently deep etched graduations Accurate tread profiles 47 - 1/2" degree 14 - 1/2 degree 55 degree and BSF, 60 degree
    B1989
    CAD $9.99
    Add to Cart
  • DIGITAL LEVEL AND BEVEL GAUGE IGAGING
    Add to Cart

    DIGITAL LEVEL AND BEVEL GAUGE IGAGING

    CAD $47.99
    B3130 Digital Level & Bevel Gauge - Igaging 3-Side Magnets, 4-Side Measuring Digital Level & Bevel Gauge 2-in-1 Heavy duty aluminum alloy body Tracing absolute level Measuring relative bevel Strong magnets on the bottom and 2 sides Large clear...
    B3130
    CAD $47.99
    Add to Cart
  • DIGITAL ANGLE GAUGE WITH LEVEL WIXEY
    Add to Cart

    Wixey Digital

    DIGITAL ANGLE GAUGE WITH LEVEL WIXEY

    Now: CAD $41.75
    Was: $64.99
    WR365 Digital Angle Gauge With Level - Wixey The new Angle Gauge has the tilting display and other exciting functions: Built in level uses patent pending Dead Level* technology Standard AAA batteries for up to 2 years life Convenient "HOLD"...
    Clearance
    WR365
    Now: CAD $41.75
    Was: $64.99
    Add to Cart
  • FEATHER BOARD TWIN PACK KREG
    Add to Cart

    Kreg

    FEATHER BOARD TWIN PACK KREG

    CAD $44.99
    KREG Feather Board Twin Pack The True-FLEXO Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in...
    PRS3020
    CAD $44.99
    Add to Cart
  • SCRAPER CABINET 6IN. SORBY
    Add to Cart

    SCRAPER CABINET 6IN. SORBY

    CAD $13.99
    Cabinet Scrapers - "Robert Sorby" Rect. 6" x 3" Made of the finest steel. Cabinet scrapers, when properly sharpened and burnished produce a finish not available with either a plane or sandpaper. Invaluable to the cabinetmaker.
    1606
    CAD $13.99
    Add to Cart
  • MITER GAUGE WITH EXTENDABLE FENCE
    Add to Cart

    Busy Bee Tools

    MITER GAUGE WITH EXTENDABLE FENCE

    CAD $89.99
    This miter gauge with extendable fence is made from die cast aluminum and is simple to adjust to any angle between 0° and 60° as needed. Another great feature is the anodized alloy fence that is fitted with an adjustable length stop for...
    BB101
    CAD $89.99
    Add to Cart
  • ABRASIVE KIT HONING FOR WS3000 AND WS2000
    Add to Cart

    WorkSharp

    ABRASIVE KIT HONING FOR WS3000

    CAD $19.95
    Honing Abrasive Kit for WS3000, Work Sharp For use with Tempered Glass Wheel (Model # WS30003) 1 piece 3600 Micro-Mesh PSA Abrasive (equivalent to 6 æ micron); 150mm diameter 1 piece 6000 Micro-Mesh PSA Abrasive (equivalent to 2æ micron);...
    WS30007
    CAD $19.95
    Add to Cart
  • TTRACK PLUS 48IN. W/ADJ. LEXAN SCAL INCRA
    Add to Cart

    Incra

    TTRACK PLUS 48IN. W/ADJ. LEXAN SCAL INCRA

    CAD $32.99
    Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...
    TTRACKPLUS48
    CAD $32.99
    Add to Cart
  • DIGITAL CALIPER 6IN. /150MM IGAGING
    Add to Cart

    Igaging

    DIGITAL CALIPER 6IN. /150MM IGAGING

    CAD $31.99
    B31586 6" Digital Caliper - iGaging Easy to Read Super Large Display LCD Quick measure speed at 120” per second Water, oil and dust resistance Hardened stainless steel Inside & Outside measures Precision lapping finish Accuracy: 0...
    B31586
    CAD $31.99
    Add to Cart
  • POCKET SCREWS 1 1/4IN. NO. 7 FINE W/H.500CT (SMLF125500)
    Add to Cart

    Kreg

    POCKET SCREWS 1 1/4IN. NO. 7 FINE W/H.500CT

    CAD $29.99
    This 1 1/4" fine thread, #2 square drive pan head screw works well in 1/2" thick, hardwood material such as oak, maple, hickory, cherry and walnut. The deep recess, pan head of this screw provides excellent driver engagement and is popular in framing...
    SMLF125500
    CAD $29.99
    Add to Cart
  • ELECTRONIC EDGE FNDER
    Add to Cart

    Groz

    ELECTRONIC EDGE FINDER

    CAD $56.99
    Electronic Edge Finder - GROZ This edge finder is an accurate and time saving tool for precisely locating work edges, shoulders, grooves etc. Ideal for use on both conventional and CNC equipment. The edge finder lights up instantly when the stylus...
    B2700
    CAD $56.99
    Add to Cart
  • DIGITAL ANGLE GAUGE 0.2 DEG ACCURACY
    Add to Cart

    DASQUA

    DIGITAL ANGLE GAUGE 0.2 DEG ACCURACY

    CAD $29.99
    With the angle sensor technology this unit can be used for many things like helping dial in the desired angle of your table saw blade with greater accuracy. The digital angle box level displays the measurements on a large backlit easy to read LCD and has...
    B4179
    CAD $29.99
    Add to Cart
  • 3PC INDEXABLE CARBIDE WOODTURNING CHISEL (BB105)
    Add to Cart

    Busy Bee Tools

    3PC INDEXABLE CARBIDE WOODTURNING CHISEL

    Now: CAD $149.00
    Was: $169.00
    These turning chisels are a great alternative to traditional turning tools that require many hours of practise to master. They cut with a fine, scraping action that leaves a great surface only requiring fine sanding to finish. The carbide tips will...
    BB105
    Now: CAD $149.00
    Was: $169.00
    Add to Cart
  • HOLDER UNIVERSAL INDICATOR
    Add to Cart

    HOLDER UNIVERSAL INDICATOR

    CAD $24.99
    Indicator Holder (Universal) Clamping dia.: 1 7/8" Length to indicator: 4 1/2" Mounts directly on machine quill Fits all indicators with 5/32" shank Indicator not included
    B2129
    CAD $24.99
    Add to Cart
  • CHISEL SET DELUXE HSS FOR LATHE 6PCS
    Add to Cart

    CHISEL SET DELUXE HSS FOR LATHE 6PCS

    CAD $239.00
    D2304 6 Pc. Deluxe HSS Lathe Chisel Set For serious wood turners, this Deluxe Lathe Chisel Set features beefy ash handles for unsurpassed control, brass ferrules and high speed steel blades. Includes: 15/16" x 17" Parting Tool, 13/16" x 17" Round Nose...
    D2304
    CAD $239.00
    Add to Cart
  • 4 PC PREMIUM SQUARE SET
    Add to Cart

    4 PC PREMIUM SQUARE SET

    CAD $52.99
    All squares in this kit are precision ground. The beams and blades are ground for both parallelism, squareness of both edges of the blade are maintained with both faces of the stock. These squares are only equipped with hardened blades. These are...
    B3814
    CAD $52.99
    Add to Cart
  • CENTRE PUNCH AUTOMATIC
    Add to Cart

    Groz

    CENTRE PUNCH AUTOMATIC

    CAD $14.99
    Automatic Centre Punch Pressure can be varied from 5lbs. to 30lbs.approximately simply by rotating knurled head. Used for light to heavy marking. Speeds up layout. Overall length 5”.
    B597
    CAD $14.99
    Add to Cart
  • LEATHER HONE KIT FOR WS3000
    Add to Cart

    WorkSharp

    LEATHER HONE KIT FOR WS3000

    CAD $39.95
    Leather Hone Kit for WS3000, Work Sharp For use with WS3000 and allows you to hone for a superior mirror finish. The kit includes: 150 mm tempered glass wheel Adhesive Backed Leather Strop Disk Chromium Oxide Honing Compound Leather Conditioner (white...
    WS30002
    CAD $39.95
    Add to Cart
  • ANGLE RULE AND GAUGE 4IN. MULTI PURPOSE
    Add to Cart

    ANGLE RULE AND GAUGE 4IN. MULTI PURPOSE

    CAD $8.99
    B3099 Multipurpose Angle Protractor This multipurpose tool can be used as a protractor, a center finder, a square, a circle divider and a drill point gauge. The tool is constructed of high quality stainless steel and features clear embossed markings...
    B3099
    CAD $8.99
    Add to Cart
  • RAZORSAW FLUSH CUTTING SAW DOUBLE EDGES
    Add to Cart

    Razor Saw

    RAZORSAW FLUSH CUTTING SAW DOUBLE EDGES

    CAD $32.99
    Double edge flush cutting saws let you cut materials in two different ways. Depending on the type of cut you would like to make, you can choose to cut with fine teeth with 1.0mm teeth pitch or coarse teeth with 1.3mm pitch. Ideal for cutting small things...
    B4130
    CAD $32.99
    Add to Cart
  • GUIDED FIELD SHARPENER 2.2.1 WORK SHARP
    Add to Cart

    WorkSharp

    GUIDED FIELD SHARPENER 2.2.1 WORK SHARP

    CAD $39.95
    The Work Sharp Guided Field Sharpener 2.2.1. is the complete knife sharpener for field, home or shop use. It is the first Angle Guided, 5 stage sharpening solution designed for sportsmen who need a complete, robust and compact field sharpening solution...
    WSGFS221C
    CAD $39.95
    Add to Cart
  • DEPTH GAUGE MILESCRAFT
    Add to Cart

    Milescraft

    DEPTH GAUGE MILESCRAFT

    CAD $10.99
    8601 Depth Gauge Milescraft Quickly and accurately locate and/or measure and mark blade and bit heights, and fence offsets. Depth Gauge Features: Durable metal scale measures in inches or millimeters Metal locking knob Wide base with sturdy...
    8601
    CAD $10.99
    Add to Cart
  • DIVIDER WING WITH CARBIDE SCRIBER
    Add to Cart

    DIVIDER WING WITH CARBIDE SCRIBER

    CAD $15.99
    B3114 6" Divider with Carbide Scriber This tool combines rigidity, light weight and easy handling and ensures transferring precise angle measurements. the fittings are solid brass with carbide scriber for scribing on metals, wood, plastic, aluminum and...
    B3114
    CAD $15.99
    Add to Cart
  • HEIGHT GAUGE DIGITAL
    Add to Cart

    Igaging

    HEIGHT GAUGE DIGITAL

    CAD $74.99
    Digital Height Gauge This large LCD display Stainless Steel Digital Height gauge has many features not found on other height gauges. First the strong magnets on the base allow for easy setting on steel table tops and fence sides. The unit allows for 2D...
    B2868
    CAD $74.99
    Add to Cart
  • IRWIN MAPLES CHISEL 4PC SET
    Add to Cart

    Irwin

    IRWIN MAPLES CHISEL 4PC SET

    CAD $44.99
    M444S4 Marple Chisel 4pcs Set - IRWIN These Marple Chisels are designed with the fine woodworker in mind. Ideal for hand or mallet work, these chisels feature longer blades of increased leverage. Made of high carbon solid-forged steel which gives...
    M444S4N
    CAD $44.99
    Add to Cart
  • SMOOTHING PLANE NO. 4 9 3/4IN. LONG
    Add to Cart

    Groz

    SMOOTHING PLANE NO. 4 9 3/4IN. LONG

    CAD $63.99
    9 3/4" Smoothing Plane - GROZ Constructed with fine-grained cast iron and sculptured wood hand rests. The 2" plane iron of high quality steel is easily adjusted and securely held for the best in hand planing. A life time product for the wood craftsman...
    SP4
    CAD $63.99
    Add to Cart
  • CALIPERS BRASS
    Add to Cart

    CALIPERS BRASS

    CAD $7.99
    Brass Sliding Caliper Solid brass 4«" long Dovetail slide calibrated 0-4" and 0-100mm Perfect pocket measuring tool in presentation case
    B1880
    CAD $7.99
    Add to Cart
  • DIGITAL READOUT FOR DEWALT DW735 PLANER
    Add to Cart

    Igaging

    DIGITAL READOUT FOR DEWALT DW735 PLANER

    CAD $85.00
    IGaging Digital Planer Readout for Dewalt DW735. Features: 3 playback positions in inches / mm / inchesFlow rate: 15.2 cm. Resolution: 0.01 mm.Functions: preset, calibrated, absolute, incremental.Backlit displayStainless steel beam...
    B4133
    CAD $85.00
    Add to Cart
  • STANLEY FAT MAX 16FT TAPE MEASURE
    Add to Cart

    Stanley

    STANLEY FAT MAX 16FT TAPE MEASURE

    Now: CAD $21.99
    Was: $26.99
    33716 STANLEY FAT MAX 16' TAPE MEASURE 33716THR These rugged and durable Stanley Fat Max 16’ tape measures (SAE) are great for use in the shop. The rugged design and comfortable ergonomic grip make them comfortable and easy to work with...
    33716
    Now: CAD $21.99
    Was: $26.99
    Add to Cart
  • SHOCKLESS HAMMER 2 LB
    Add to Cart

    SHOCKLESS HAMMER 2 LB

    CAD $16.99
    Shockless Hammer - 2lb. With cast urethane head and tubular steel handle with nonslip rubber grip. Does not bounce.
    B006
    CAD $16.99
    Add to Cart
  • CENTRE PUNCH/SCRIBE SET
    Add to Cart

    CENTRE PUNCH/SCRIBE SET

    CAD $9.99
    Automatic Center Punch and Double Ended Scriber Set This set consists of an automatic center punch and a double ended scriber. The center punch allows automatic single hand operation and is adjustable from very light to extra heavy markings. The...
    B3019
    CAD $9.99
    Add to Cart
  • TAPERING JIG FOR TABLE SAWS 24IN.
    Add to Cart

    TAPERING JIG FOR TABLE SAWS 24IN.

    CAD $38.99
    This Taper Jig was made with a durable aluminum construction and has a built in scale and is fully adjustable. It is also equipped with a backside stop to hold your material in place. Taper jig can be setup and assembled for either right or left hand use...
    B3839
    CAD $38.99
    Add to Cart
  • POCKET SCREW HD 2 1/2IN. NO. 4COARSE 125/PACK
    Add to Cart

    Kreg

    POCKET SCREW HD 2 1/2IN. NO. 4COARSE 125/PACK

    CAD $29.99
    SMLC2X250125 2-1/2", 125/pk No.4 Coarse Pocket Screw - KREG Large 2-1/2" long #14 hardened-steel screws for 1-1/2" and thicker material Massive flat surface under head provides superior holding power Self-tapping thread design does not require second...
    SMLC2X250125
    CAD $29.99
    Add to Cart
  • SALAD BOWL FINISH CLAPHAMS 1.75 OZ. (B158902)
    Add to Cart

    Claphams

    SALAD BOWL FINISH CLAPHAMS 1.75 OZ.

    CAD $10.99
    B158902 1.75 Oz Beeswax Salad Bowl Finish - CLAPHAM'S Our food-grade Beeswax/Carnauba/Mineral oil finish is suitable for all things wooden in the kitchen. The finish protects the wood and gives it a soft lustrous shine. It is suitable for salad bowls,...
    B158902
    CAD $10.99
    Add to Cart
  • PRECISION MARKING RULE 6IN. INCRA
    Add to Cart

    Incra

    PRECISION MARKING RULE 6IN. INCRA

    CAD $10.99
    INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE06
    CAD $10.99
    Add to Cart
  • CALIPER DIAL 6IN. 0.001
    Add to Cart

    CALIPER DIAL 6IN. 0.001

    CAD $58.99
    6" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...
    B10566
    CAD $58.99
    Add to Cart
  • SORBY TURNMASTER WITH CARBIDE CUTTERS
    Add to Cart

    Robert Sorby

    SORBY TURNMASTER WITH 3 CARBIDE CUTTERS

    CAD $210.99
    RSTMHCT123 TurnMaster Handled with Detail Point, Round and Square Tungsten Carbide Cutters - Robert Sorby FEATURES: 3 Tungsten Carbide Cutters; Detail Point, Round and Square All cutters interchangeable with one tool Indexable, patented cutting head...
    RSTMHCT123
    CAD $210.99
    Add to Cart
  • CALIPER DIGITAL 4IN.
    Add to Cart

    CALIPER DIGITAL 4IN.

    CAD $49.99
    4" Digital Caliper Range 0-4"/0-90mm Resolution: .0005"/.01mm Stainless steel with hardened jaws Inside, outside and depth
    B2523
    CAD $49.99
    Add to Cart
  • 6IN. HOOKED RULER 4R IGAGING
    Add to Cart

    Igaging

    6IN. HOOKED RULER 4R IGAGING

    CAD $10.99
    B3126 6" Hooked Rule 4R - iGaging Hardened Stainless, Satin Chrome, 4R Scale Adjustable hook can be used on both sides High accuracy
    B3126
    CAD $10.99
    Add to Cart
  • BIT SQUARE DRIVER COMBO 2X6IN. NO. 2 KREG
    Add to Cart

    Kreg

    BIT SQUARE DRIVER COMBO 2X6IN. NO. 2 KREG

    CAD $7.99
    D6X2 2pc 6" #2 Square Driver Bit for Kreg Pocket Hole Systems Versatile #2 square driver extension bits 6" long Compatible with virtually any drill that accepts exchangeable bits Provides the added length needed in certain drilling applications
    D6X2
    CAD $7.99
    Add to Cart
  • POCKET SCREWS 2IN. NO. 8 CRSE W/H 250CT KREG
    Add to Cart

    Kreg

    POCKET SCREWS 2IN. NO. 8 CRSE W/H 250CT KREG

    CAD $22.99
    This 2" coarse thread, #2 square drive washer head screw works well in softer material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is...
    SMLC2250
    CAD $22.99
    Add to Cart
  • HOLD DOWN FOR T TRACK
    Add to Cart

    HOLD DOWN FOR T TRACK

    CAD $12.99
    Hold Down T-Track Solid aluminum with large T-Knob fits any slot which holds the head of 1/4" - 20 bolt. Hold stock upto 2" thick.
    B2530
    CAD $12.99
    Add to Cart
  • WORKSHARP KNIFE AND TOOL MK2 SHARPENER
    Add to Cart

    WorkSharp

    WORKSHARP KNIFE AND TOOL MK2 SHARPENER

    CAD $145.00
    Sharpens straight blade knives, curved knives, tanto blades, filet knives, serrated knives, gut hooks, scissors, axes, hatchets, mower blades, garden shears, shovels and most any tool with a blade. Gives you fast, easy, precision results every time...
    WSKTS2C
    CAD $145.00
    Add to Cart
  • BUSY BEE NO. 4 SMOOTHING PLANE
    Add to Cart

    Busy Bee Tools

    BUSY BEE NO. 4 SMOOTHING PLANE

    Now: CAD $145.00
    Was: $149.00
    Introducing the No. 4 smoothing plane, part of a new line of high quality woodworking hand planes from Busy Bee Tools. This No. 4 smoothing plane is the ideal tool for preparing surfaces for final finishing and is much faster than sanding or scraping...
    BBHP4
    Now: CAD $145.00
    Was: $149.00
    Add to Cart
  • DIGITAL CALIPER 0 6IN. LARGE LCD
    Add to Cart

    Igaging

    DIGITAL CALIPER 0 6IN. LARGE LCD

    CAD $43.99
    B3259 6" Digital Caliper - iGaging Large Display for easy view High Measuring speed 120"/second 3 Reading: Inch, Metric and Fraction Dust resistance Hardened Stainless Steel with precision lapping finish Smooth movement SPECIFICATIONS Measure...
    B3259
    CAD $43.99
    Add to Cart
  • KREG POCKET HOLE JIG 520PRO
    Add to Cart

    Kreg

    KREG POCKET HOLE JIG 520PRO

    CAD $137.00
    Build pocket-hole projects anytime, anywhereThe Pocket-Hole Jig 520PRO is the most versatile jig yet from Kreg®. It’s the essential jig for project builders who need an easy-to-use joinery solution wherever you work — in the backyard, on...
    KPHJ520PRO
    CAD $137.00
    Add to Cart
  • RASP HALF ROUND 10IN.
    Add to Cart

    RASP HALF ROUND 10IN.

    CAD $7.99
    B2638 Half Round Rasp, 10" These selected rasps feature an ergonomic rubberized soft grip handle, specially selected heat treat alloy steel construction and overall high quality for demanding applications.
    B2638
    CAD $7.99
    Add to Cart
  • POCKET SCREWS 2IN. NO. 8 COARSE W/H 50CT KREG
    Add to Cart

    Kreg

    POCKET SCREWS 2IN. NO. 8 COARSE W/H 50CT KREG

    CAD $5.99
    This 2-1/2-inch coarse thread, #2 square drive washer-head screw works well in 1-1/2-inch-thick material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket...
    SMLC250
    CAD $5.99
    Add to Cart
  • 5IN. CONTOUR GAUGE PROFILE DUPLICATOR
    Add to Cart

    ROK

    5IN. CONTOUR GAUGE PROFILE DUPLICATOR

    CAD $9.99
    5" Contour Gauge helps duplicate the profile of moldings or other irregular shaped objects to scribe and cut pieces for a more accurate fit. Equipped with a locking function that allows of accurate and easy transfer of profiles with out worry...
    B4020
    CAD $9.99
    Add to Cart
  • TTRACK PLUS 36IN. W/ADJ. LEXAN SCAL INCRA
    Add to Cart

    Incra

    TTRACK PLUS 36IN. W/ADJ. LEXAN SCAL INCRA

    CAD $24.99
    Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...
    TTRACKPLUS36
    CAD $24.99
    Add to Cart
  • SAW STEP GAUGE
    Add to Cart

    SAW STEP GAUGE

    CAD $9.99
    Saw Step Gauge Heavy Gauge Aluminum Our step gauge gives you an exact setting, the first time, regardless of width or set of the blade. More accurate than any ruler. It will set your rip fence, your radial or table saw depth of cut and measure groove...
    B897
    CAD $9.99
    Add to Cart
  • KREG XL STRAIGHT EDGE GUIDE 8 FT
    Add to Cart

    Kreg

    KREG XL STRAIGHT EDGE GUIDE 8 FT

    CAD $110.00
    Make perfectly straight cuts up to 8 feet in sheet goods with guided cuttingCut sheet goods down to size with precision and ease by using the Kreg® Straight Edge Guide. Work with material up to 8 feet and get the cuts you need — whether you're...
    KMA4700
    CAD $110.00
    Add to Cart
  • PRECISION TRAK AND STOP KIT KREG
    Add to Cart

    Kreg

    PRECISION TRAK AND STOP KIT KREG

    CAD $220.00
    KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw...
    KMS8000
    CAD $220.00
    Add to Cart
  • TTRACK PLUS 24IN. W/ADJ. LEXAN SCAL INCRA
    Add to Cart

    Incra

    TTRACK PLUS 24IN. W/ADJ. LEXAN SCAL INCRA

    CAD $20.99
    Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...
    TTRACKPLUS24
    CAD $20.99
    Add to Cart
  • HINGE MORTISE KIT MILESCRAFT
    Add to Cart

    Milescraft

    HINGE MORTISE KIT MILESCRAFT

    CAD $29.99
    Hinge Mortise Kit - MilesCraft This kit allows you to cut accurate door and jamb hinge mortises without any tear or a hole on the wall. The centered tape measures tabs for accurate placement on the door and jamb and the door thickness selector is easily...
    1214
    CAD $29.99
    Add to Cart
  • SCREW PITCH GAUGE TP14 42
    Add to Cart

    SCREW PITCH GAUGE TP14 42

    CAD $18.99
    Screw Pitch Gauges Features Made of tempered steel and are precision ground T.P.I. stamped on each blade All blades can be locked to any desired position Number of blades: 30 TPI: 4-42
    B576
    CAD $18.99
    Add to Cart
  • CARVING CHISEL SET HSS 12PCS
    Add to Cart

    Woodstock

    CARVING CHISEL SET HSS 12PCS

    CAD $115.00
    D3784  12 pc. Chisel Set This professional set of Carving Chisels include hand forged high carbon steel blades and ash handles with steel ferrules and an aluminum carrying case. Each chisel measures 8-3/4" long overall with 4-7/8" long contoured...
    D3784
    CAD $115.00
    Add to Cart
  • WORK SHARP ASSORTED BELT KIT FOR WSKTSKO
    Add to Cart

    WorkSharp

    WORK SHARP ASSORTED BELT KIT FOR WSKTSKO

    CAD $25.99
    WSSAKO81113C Assorted Belt Kit for WSKTSKO - WORKSHARP Replacement abrasive belt assortment for the WSKTS-KO only. Not compatible with other Work Sharp tools. INCLUDES (1 of each belt): P120 Extra Coarse Grit, 3/4" x 12" X65 Coarse Grit (P220...
    WSSAKO81113C
    CAD $25.99
    Add to Cart
  • PLANE SHOULDER 5 3/16IN.
    Add to Cart

    PLANE SHOULDER 5 3/16IN.

    CAD $85.00
    B3111 5-3/16" Shoulder Plane This shoulder plane features 5-3/16" long sole and a 3/4" wide sharp steel blade ensuring perfectly smooth surface. The adjustable throat opening is for very fine or coarse work and the top part can be removed for changing...
    B3111
    CAD $85.00
    Add to Cart
  • DIGITAL MULTI GAUGE 0 6IN. INCH/METRIC
    Add to Cart

    Igaging

    DIGITAL MULTI GAUGE 0 6IN. INCH/METRIC

    CAD $24.99
    B3131 0-6" 3 in1 inch & metric Digital Multi Gauge - Igaging Router Depth / Slot Depth / Welding Thickness  3-in-1 3-Way Measure: Horizontal, Vertical, 90-degree Angle 3-Way Reading:  Inch, Inch Fractional, Metric EZ View: Super Large LCD...
    B3131
    CAD $24.99
    Add to Cart
  • CHUCK SCROLL 4 JAW 3/4IN. X 16 TPI
    Pre-Order Now

    CHUCK SCROLL 4 JAW 3/4IN. X 16 TPI

    CAD $119.00
    4 Jaw Safety Scroll Chuck - 3/4" x 16 TPI The Perfect Way To Hold Face Plate Work| Precision turned Hardened body and jaws Black oxide finish Complete with Allen wrench and two locking bars External chucking: Round: 1 3/4" - 2 5/8" dia. Internal...
    B2249134
    CAD $119.00
    Pre-Order Now
  • HOLLOWING TOOL 20IN. L 12IN. HL SORBY
    Add to Cart

    Robert Sorby

    HOLLOWING TOOL 20IN. L 12IN. HL SORBY

    CAD $77.99
    Hollowing Tool 20" By Robert Sorby H.S.S. Designed specifically for those who wish to make hollow forms or vases Handle length: 12" Replacement Cutter model 851C
    855H
    CAD $77.99
    Add to Cart
  • KNIFE AND TOOL SHARPENER KO WORK SHARP
    Add to Cart

    WorkSharp

    KNIFE AND TOOL SHARPENER KO WORK SHARP

    CAD $219.00
    WSKTSKOC Ken Onion Edition Knife & Tool Sharpener - WORKSHARP The Ken Onion Edition Knife & Tool Sharpener is designed to sharpen every knife you own. Using a fully adjustable precision sharpening guide, variable speed and wide flexible abrasive belts...
    WSKTSKOC
    CAD $219.00
    Add to Cart
  • DOVETAIL PULL SAW IRWIN
    Add to Cart

    Irwin

    DOVETAIL PULL SAW IRWIN

    CAD $25.99
    IRWIN Dovetail Pull Saw The IRWIN 213104 Dovetail is ideal for flush cutting dowels & any fine detail work. The dovetail saw is also a great tool for cutting shims. The pull stroke action eliminates binding and facilitates a straight cut. The...
    213104
    CAD $25.99
    Add to Cart
  • MITER SAW PROTRACTOR 7IN.
    Add to Cart

    DASQUA

    MITER SAW PROTRACTOR 7IN.

    Now: CAD $29.99
    Was: $33.99
    Manual-reading miter saw protractors are used to find angles on corners. These protractors have two flat arms that extend from a central pivot assembly where angle scales are marked. These arms rotate to come flush with two adjoining surfaces that need...
    B4140
    Now: CAD $29.99
    Was: $33.99
    Add to Cart
  • BUSY BEE NO. 5 JACK PLANE
    Add to Cart

    Busy Bee Tools

    BUSY BEE NO. 5 JACK PLANE

    CAD $189.00
    Introducing the No. 5 Jackplane, part of a new line of high quality woodworking hand planes from Busy Bee Tools. This No. 5 Jack plane is the ideal tool for removing large amounts of material from boards to bring them to a specific dimension. Its...
    BBHP5
    CAD $189.00
    Add to Cart
  • PRECISION LAYOUT AND MARKING SET
    Add to Cart

    DASQUA

    PRECISION LAYOUT AND MARKING SET

    CAD $69.99
    This 5 pc Precision Layout and Marking set is CNC machined with a precision ground measuring face for high accuracy and repeatability. The laser engraved scale with black lines against the sand blasted finish allow for easy reading. All gauges a...
    B4141
    CAD $69.99
    Add to Cart
  • 1 1/4IN. DISH CARVING BIT 1/2IN. SHANK
    Add to Cart

    Craftex Blue Tornado

    1 1/4IN. DISH CARVING BIT 1/2IN. SHANK

    CAD $26.99
    This bit is what you need to make a recessed area that you would find on a tray or signs with raised lettering. Ideal for making trays, coasters, raised letter signs and more. SPECIFICATIONS Diameter: 1-1/4" Cutting Length: 5/8" Radius: 1/4" Shank...
    197318
    CAD $26.99
    Add to Cart

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley