null

Chisels

Chisels

  • HOLLOWING TOOL 20IN. L 12IN. HL SORBY

    Robert Sorby

    HOLLOWING TOOL 20IN. L 12IN. HL SORBY

    Now: CAD $67.99
    Was: $89.99
    Hollowing Tool 20" By Robert Sorby H.S.S. Designed specifically for those who wish to make hollow forms or vases Handle length: 12" Replacement Cutter model 851C
    855H
    Now: CAD $67.99
    Was: $89.99
    Pre-Order Now
  • CHISEL RING TOOL 1/2IN. H.S.S. SORBY

    Robert Sorby

    CHISEL RING TOOL 1/2IN. H.S.S. SORBY

    Now: CAD $78.99
    Was: $105.00
    Ring Tool 1/2" By Robert Sorby H.S.S. The dual bevels allow for hollowing of internal curved surfaces. Ideal for goblets and egg cups
    845H12
    Now: CAD $78.99
    Was: $105.00
    Pre-Order Now
  • CHISEL GOUGES ROUGHING OUT 1 1/4IN. SORBY

    Robert Sorby

    CHISEL GOUGES ROUGHING OUT 1 1/4IN. SORBY

    Now: CAD $142.00
    Was: $165.00
    1 1/4'' Roughing Out Gouge By Robert Sorby H.S.S. An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out...
    843LH114
    Now: CAD $142.00
    Was: $165.00
    Pre-Order Now
  • CHISEL ROUGHING GOUGE OUT 3/4IN.

    Robert Sorby

    CHISEL ROUGHING GOUGE OUT 3/4IN.

    Now: CAD $91.99
    Was: $115.00
    3/4'' Roughing Out Gouge An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out to spindle work can be...
    843H34
    Now: CAD $91.99
    Was: $115.00
    Pre-Order Now
  • GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

    Robert Sorby

    GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

    Now: CAD $97.99
    Was: $113.00
    Fingernail Profile Gouges 3/8" Bowl Gouge (Long Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground fingernail profile, which is not only safe in use, but also allows the turner to...
    842FLH38
    Now: CAD $97.99
    Was: $113.00
    Pre-Order Now
  • GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

    Robert Sorby

    GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

    Now: CAD $115.00
    Was: $145.00
    842FLH12 Bowl Gouge by Robert Sorby- 1/2" - 23" Length Deep fluted to allow heavy cuts to be taken. This tool is used over on its side (about 15-20m off the vertical) with the flute pointing in the direction of the cut. It is important to let the...
    842FLH12
    Now: CAD $115.00
    Was: $145.00
    Pre-Order Now
  • GOUGE SPINDLE FINGERNAIL 3/8IN. SORBY

    Robert Sorby

    GOUGE SPINDLE FINGERNAIL 3/8IN. SORBY

    Now: CAD $52.99
    Was: $67.99
    Fingernail Profile Gouges - 3/8" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the...
    840FH38
    Now: CAD $52.99
    Was: $67.99
    Pre-Order Now
  • GOUGE SPINDLE FINGERNAIL 1/2IN. SORBY

    Robert Sorby

    GOUGE SPINDLE FINGERNAIL 1/2IN. SORBY

    Now: CAD $67.99
    Was: $83.99
    Fingernail Profile Gouges - 1/2" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the...
    840FH12
    Now: CAD $67.99
    Was: $83.99
    Add to Cart
  • CHISEL BEAD FORMING 1/8IN. H.S.S. SORBY

    Robert Sorby

    CHISEL BEAD FORMING 1/8IN. H.S.S. SORBY

    Now: CAD $39.99
    Was: $52.99
    835H18 1/8" H.S.S Bead Forming Chisel - Robert Sorby These tools provide the means of forming perfect beads from 1/8" to 1/2". The nose design permits multiple beads to be cut with precision on spindle for faceplate work. Slight movement...
    835H18
    Now: CAD $39.99
    Was: $52.99
    Add to Cart
  • PARTING TOOL 2MM FLUTED SORBY

    Robert Sorby

    PARTING TOOL 2MM FLUTED SORBY

    Now: CAD $89.99
    Was: $105.00
    2 mm Parting Tool Fluted 18" long Used with flute downwards. This tool gives an exceptionally good finish even when parting through end grain. Sides taper ground for clearance. High Speed Steel
    832H2M
    Now: CAD $89.99
    Was: $105.00
    Pre-Order Now
  • WOODTURNING TOOLS CURVED SCRAPER SORBY

    Robert Sorby

    WOODTURNING TOOLS CURVED SCRAPER SORBY

    Now: CAD $74.99
    Was: $92.99
    Curved Scraper - Robert Sorby The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an aggressive cut, whilst retaining...
    828H
    Now: CAD $74.99
    Was: $92.99
    Add to Cart
  • CHISEL TRNG 8PC SET BOWL AND SPNDL SORBY

    CHISEL TRNG 8PC SET BOWL AND SPNDL SORBY

    Now: CAD $599.00
    Was: $729.00
    82HS Professional Wood Turning Chisel Set Standard set of 8pc: 1 - 3/4" Roughing Gouge 1 - 1/4'' Spindle Gouge 1 - 1/2" Spindle Gouge 1 - 3/8" Bowl Gouge 1 - 1/2" Round Nose Scraper 1 - 1" Square Nose Scraper 1 - 3/4" Skew Chisel 1- 3-16" Parting...
    82HS
    Now: CAD $599.00
    Was: $729.00
    Add to Cart
  • SAND MASTER 11 1/2IN. OA LENGTH SORBY

    SAND MASTER 11 1/2IN. OA LENGTH SORBY

    CAD $105.00
    410 Sand Master - ROBERT SORBY To put a fine finish on turning work and eliminate sanding lines. Velcro 2" sponge pad mounted on phosphor bronze bearing gives excellent service. Total Length: 11-1/2" Handle: 8-1/2"
    410
    CAD $105.00
    Pre-Order Now
  • CHISEL PEN TURNING SET 3 PC SORBY

    Robert Sorby

    CHISEL PEN TURNING SET 3 PC SORBY

    Now: CAD $129.00
    Was: $169.00
    High Speed Steel 3 pc Pen Turning Set Set Contains: -5 /16" roughing gouge, (model # 866H) -1/16" parting tool, (model # 865H) -1 /2" spindle master, (model # 879H) (All chisels are 10" long)
    36HS
    Now: CAD $129.00
    Was: $169.00
    Add to Cart
  • SCRAPER CABINET 6IN. SORBY

    SCRAPER CABINET 6IN. SORBY

    CAD $12.99
    Cabinet Scrapers - "Robert Sorby" Rect. 6" x 3" Made of the finest steel. Cabinet scrapers, when properly sharpened and burnished produce a finish not available with either a plane or sandpaper. Invaluable to the cabinetmaker.
    1606
    CAD $12.99
    Pre-Order Now
  • SPONGE PADS 2IN. DIA SORBY

    SPONGE PADS 2IN. DIA SORBY

    CAD $30.99
    2" Velcro Sanding Pad By Robert Sorby May be used with the "Sand Master" or separately Available - 2" Velcro Sponge Discs - 10 Per Pack Model Grit RS412A60 60 RS412A120 120 RS412A180 180 RS412A240 240
    RS412
    CAD $30.99
    Add to Cart
  • MORTISING CHISEL 5/8IN.

    MORTISING CHISEL 5/8IN.

    CAD $16.99
    Mortising Chisel for Mortising Attachment. Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 5 / 8" Collar Diameter: 3 / 4"
    B320058
    CAD $16.99
    Add to Cart
  • MORTISING CHISEL 3/8IN.

    MORTISING CHISEL 3/8IN.

    CAD $16.99
    Mortising Chisel for Mortising Attachment Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 3 / 8" Collar Diameter: 3 / 4"
    B320038
    CAD $16.99
    Add to Cart
  • MORTISING CHISEL 1/4IN.

    MORTISING CHISEL 1/4IN.

    CAD $13.99
    Mortising Chisel for Mortising Attachment Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 1 / 4" Collar Diameter: 3 / 4"
    B320014
    CAD $13.99
    Add to Cart
  • MORTISING CHISEL 1/2IN.

    MORTISING CHISEL 1/2IN.

    CAD $13.99
    Mortising Chisel for Mortising Attachment.Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 1 / 2" Collar Diameter: 3 / 4"
    B320012
    CAD $13.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley