Mitre Gauges and Tracks

SAWSTOP Scale Miter Gauge Engineered to bring can’t-miss accuracy to any table saw, the Scale Miter Gauge (SMG) features a protractor head with a pointer-and-notch alignment mechanism that locks in 181 precise angles. Anchor that to a premium...

SAWSTOP Revolution Mitre Gauge Saw Stop’s Revolution Miter Gauge is built around a mitre gauge head with an innovative and intuitive dial adjustment to fine-tune the angle. Settings are precise, reliable, and repeatable. Furthermore, setup and...

Utility Track 12" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount

Utility Track 24" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount

MITER100018T INCRA MITER GAUGE 1000 If you are looking for a great combination of basic affordability combined with unbeaten accuracy, the INCRA Miter 1000 is a terrific choice. We combined a solid-steel laser cut protractor head with a gold anodized...

Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...

Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...

Locate ANY cut on ANY machine EXACTLY where you want it.Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA...

Make perfectly straight cuts up to 8 feet in sheet goods with guided cuttingCut sheet goods down to size with precision and ease by using the Kreg® Straight Edge Guide. Work with material up to 8 feet and get the cuts you need — whether you're...

Make perfectly straight cuts up to 4 feet in sheet goods with guided cuttingCut sheet goods down to size with precision and ease by using the Kreg® Straight Edge Guide. Work with material up to 4 feet and get the cuts you need — whether you're...

This aluminum mitre gauge has all the features of a great crosscutting aid. It has adjustable stops at both 45° marks and many detents along the gauge to quickly select cutting angles. There is also an adjustable zero scale to help you dial the...

Utility Track 36" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount

This miter gauge with extendable fence is made from die cast aluminum and is simple to adjust to any angle between 0° and 60° as needed. Another great feature is the anodized alloy fence that is fitted with an adjustable length stop for...

KMS7520 Track Clamp – KREG Track Clamps from Kreg make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy to use clamps lock into place on the underside of the Accu-Cut track and starting block to offer additional...

B3263 ALUMINUM MITER TRACK 36" 36" Aluminum Miter Track that works with standard 3/4" x 3/8" miter gauges with or without T-slot. Slides into miter track or miter slot on your table saw and can be used on table saw extensions, drill press tables &...

B3262 32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled holes

INCRA MITER GAUGE V27 The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter...

MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...

MITEREXPRESS INCRA MITER GAUGE EXPRESS The NEW Incra Miter Express Makes Safe and Easy Mitered Cuts Incra's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Turn any miter...

KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw...

INCRA MITER SLIDER 24" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...

INCRA MITER SLIDER 18" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...

Hold Down T-Track Solid aluminum with large T-Knob fits any slot which holds the head of 1/4" - 20 bolt. Hold stock upto 2" thick.

36" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...

24" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...

Aluminum T-Track Hold Down Kit 3/4" x 1/4" aluminum bar 3" wing nut 4" 1/4-20 bolt