Measuring Tools

Measuring Tools

  • Stanley

    STANLEY FAT MAX 25 X 1 1/4 MEASURE TAPE

    $34.99
    33725THR The STANLEY FatMax 25 ft Tape Measure is extra tough and durable thanks to industrial-grade BladeArmor coating on the first 3" and a high-impact ABS case. Features & Benefits 11' blade standout 1-1/4" wide blade for easy...
    33725THR
    $34.99
    Pre-Order Now
  • MINI MAG BASE

    Groz

    MINI MAG BASE

    Now: $4.99
    Was: $11.99
    Mini Magnetic Base - 5" While Model B420 comes with an extra rod, Model B421 has a fine adjustment Included is a disc on bottom for neutralizing magnet Powerful magnets are 1 1/8" in dia. and 1 1/8" high
    B420
    Now: $4.99
    Was: $11.99
  • DIAL INDICATOR TYPE A1 921 1IN. TRAVEL

    DIAL INDICATOR TYPE A1 921 1IN. TRAVEL

    Now: $9.99
    Was: $27.99
    Dial Indicator 2" Dia. Face - 1" Travel These dial gauges fit all standard magneticc bases| Satin chrome-plated case Easy-to-read faces .001" reading Precision ground hard chrome-plated stem and contact point
    B444
    Now: $9.99
    Was: $27.99
  • THICKNESS GAUGE 26 LEAVES

    THICKNESS GAUGE 26 LEAVES

    $5.99
    B622 Thickness Gauage 26 leaf thickness gauge. Each leaf is marked. Leaves from .0015” to .025”Edge of each leaf is round and approximately 3 3/8” long. High quality tempered steel, and made to close tolerances.
    B622
    $5.99
    Add to Cart
  • ROK

    DIGITAL CLAMP METER

    Now: $17.20
    Was: $49.99
    B3594 Digital Clamp Meter Digital LCD, max reading of 1999 Data hold function Overload protection Low battery indicator Current: AC400A Voltage: AC300W / DC 300V
    B3594
    Now: $17.20
    Was: $49.99
    Add to Cart
  • Wixey Digital

    DRILL PRESS HEIGHT GAUGE WIXEY

    Now: $59.99
    Was: $79.99
    WR503 Drill Press Depth Gauge - Wixey The Wixey WR503 Drill Press Depth Gauge mounts to any drill press. It can be attached to the existing depth stop rod or directly to the collar on the quill. This device allows the user to quickly set the readout...
    WR503
    Now: $59.99
    Was: $79.99
    Add to Cart
  • Igaging

    IGAGING 0 6IN. DIGITAL CALIPER

    Now: $99.99
    Was: $109.99
    B3487 0 - 6" Digital Calliper - iGaging Built in smart wireless data connectivity for smart phone and tablet Auto shut-off Ultra measure speed Ultra speed movement Hardened stainless steel
    B3487
    Now: $99.99
    Was: $109.99
    Add to Cart
  • Igaging

    ANGLE CUBE DIGITAL SENSOR LEVEL IGAGING

    Now: $54.99
    Was: $59.99
    B3476 Angle Cube Digital Sensor Level - iGaging Portable digital angle gauge with magnetic base feature rich, smaller and lighter than ever before! get precise angle readings. Large LCD display reads upright at any angle. Digital angle...
    B3476
    Now: $54.99
    Was: $59.99
    Add to Cart
  • ROK

    BEAM COMPASS

    $7.99
    B3427 Beam Compass Designed to mark circles on drywall, plywood and other building materials Helps make accurate hole markings Adjustable pivot point and integrated pencil holder make perfect circles 16" long fibreglass
    B3427
    $7.99
    Add to Cart
  • Igaging

    DIGITAL HEIGHT 0 1/4IN. GAUGE IGAGING

    Now: $27.99
    Was: $29.99
    B3406 Digital Height Gauge - iGaging Resolution 0.0005"/0.01mm/64th fraction Measures range 1/4" depth to 2" height Accuracy 0.001"/0-1" Auto shut-off Smooth spring plunger movement Flat and bail-tip anvils included Rare earth magnetic...
    B3406
    Now: $27.99
    Was: $29.99
    Pre-Order Now
  • ALUMINUM MITER TRACK 32IN. P294402

    Now: $11.99
    Was: $15.99
    B3262 32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled...
    B3262
    Now: $11.99
    Was: $15.99
    Add to Cart
  • MEASURING TAPE 3/4IN. X 16FT

    Now: $5.50
    Was: $8.99
    B3310 16ft, 3/4" Measuring Tape Featuring a strong polycarbonate case with rubber grip, calibrated inch and metric measurements and one hand tape position holder for desired convenience.  Standout - 16 ft Tape lock Belt clip
    B3310
    Now: $5.50
    Was: $8.99
    Add to Cart
  • Igaging

    14IN. DIGITAL RULE AND PROTRACTOR IGAGING B312814

    Now: $34.99
    Was: $36.99
    B312814 Digital Protractor & Rule 2 in 1 Stainless steel rule blades with mm and inch marking scales Strong/firm lock Hold function Reversible reading Inside & Outside angle measure Easy to use & easy to carry Light weight  ...
    B312814
    Now: $34.99
    Was: $36.99
    Add to Cart
  • DIGITAL CALIPER 6IN. /150MM IGAGING

    Igaging

    DIGITAL CALIPER 6IN. /150MM IGAGING

    Now: $29.99
    Was: $31.99
    B31586 6" Digital Calliper - iGaging Easy to Read Super Large Display LCD Quick measure speed at 120” per second Water, oil and dust resistance Hardened stainless steel Inside & Outside measures Precision lapping finish Accuracy: 0.0015”/6”...
    B31586
    Now: $29.99
    Was: $31.99
    Add to Cart
  • DEPTH GAUGE MILESCRAFT

    Milescraft

    DEPTH GAUGE MILESCRAFT

    $8.99
    8601 Depth Gauge - Miles Craft The 8601 allows to quickly and accurately measure, mark or locate blade, bit heights and fence offsets. The large scale markers and view finder allows easy and accurate adjustments and the self standing feature allows a...
    8601
    $8.99
    Add to Cart
  • HOLDER FOR DIAL INDICATOR W/MAGNET

    HOLDER FOR DIAL INDICATOR W/MAGNET

    $19.99
    Holder for Dial Indicator with Magnet Whether you are cross cutting, ripping or any other job, the alignment of the blade plays an important role to get an accurate result. This dial indicator holder can fit the miter slot (3/4") of your table saw and...
    B2939
    $19.99
    Add to Cart
  • SCREW PITCH GAUGE TP14 42

    SCREW PITCH GAUGE TP14 42

    $14.99
    Screw Pitch Gauges Features Made of tempered steel and are precision ground T.P.I. stamped on each blade All blades can be locked to any desired position Number of blades: 30 TPI: 4-42
    B576
    $14.99
    Add to Cart
  • MICROMETER 0 1 0.0001 OUTSIDE

    MICROMETER 0 1 0.0001 OUTSIDE

    Now: $27.99
    Was: $29.99
    Outside Micrometers - 0"-1" Measuring faces carbide tipped for a long tool life Enamelled frame of malleable cast iron Spindle thread hardened ground and lapped Ratchet stop for exact readings
    B105101
    Now: $27.99
    Was: $29.99
    Add to Cart
  • Igaging

    DIGITAL CALIPER 0 6IN. LARGE LCD

    Now: $43.99
    Was: $45.99
    B3259 6" Digital Caliper - iGaging Large Display for easy view High Measuring speed 120"/second 3 Reading: Inch, Metric and Fraction Dust resistance Hardened Stainless Steel with precision lapping finish Smooth movement SPECIFICATIONS Measure...
    B3259
    Now: $43.99
    Was: $45.99
    Add to Cart
  • GAUGE SCREW CUTTING

    Groz

    GAUGE SCREW CUTTING

    Now: $4.69
    Was: $5.99
    Gauge Screw Cutting Made from stainless steel in satin chrome finish. Permanently deep etched graduations Accurate tread profiles 47 - 1/2" degree 14 - 1/2 degree 55 degree and BSF, 60 degree
    B1989
    Now: $4.69
    Was: $5.99
    Add to Cart
  • DIGITAL REMOTE READOUT 0 24IN. IN/ METRIC

    Igaging

    DIGITAL REMOTE READOUT 0 24IN. IN/ METRIC

    Now: $69.99
    Was: $74.99
    B313624 0-24” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display Magnetic & Clamp hardware on remote...
    B313624
    Now: $69.99
    Was: $74.99
    Add to Cart
  • DIAL BORE GAUGE 2 6IN.

    Igaging

    DIAL BORE GAUGE 2 6IN.

    Now: $109.00
    Was: $115.00
    B3149 2" to 6" Dial Bore Gauge - iGaging This is a precision dial bore gauge set from iGaging for precise measurement of cylinder bores, main caps, and connecting rods. Easy to Use and Read Super Precision Deep Bore Gauge Extension Holder Measures...
    B3149
    Now: $109.00
    Was: $115.00
    Add to Cart
  • DIVIDER WING WITH CARBIDE SCRIBER

    DIVIDER WING WITH CARBIDE SCRIBER

    $16.99
    B3114 6" Divider with Carbide Scriber This tool combines rigidity, light weight and easy handling and ensures transferring precise angle measurements. the fittings are solid brass with carbide scriber for scribing on metals, wood, plastic, aluminum and...
    B3114
    $16.99
    Add to Cart
  • SCALE 6IN. STAINLESS STEEL

    SCALE 6IN. STAINLESS STEEL

    Now: $2.29
    Was: $3.99
    B3097 6" (150mm) Stainless Steel Scale This 6" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.
    B3097
    Now: $2.29
    Was: $3.99
    Add to Cart
  • DIGITAL MULTI GAUGE 0 6IN. INCH/METRIC

    Igaging

    DIGITAL MULTI GAUGE 0 6IN. INCH/METRIC

    Now: $23.99
    Was: $25.99
    B3131 0-6" 3 in1 inch & metric Digital Multi Gauge - Igaging Router Depth / Slot Depth / Welding Thickness  3-in-1 3-Way Measure: Horizontal, Vertical, 90-degree Angle 3-Way Reading:  Inch, Inch Fractional, Metric EZ View: Super Large...
    B3131
    Now: $23.99
    Was: $25.99
    Add to Cart
  • 12IN. RULER IGAGING

    Igaging

    12IN. RULER IGAGING

    Now: $3.99
    Was: $4.49
    B3129 12" Ruler - Igaging Hardened stainless Steel, satin chrome, 4R scale Adjustable hook can be used on both sides Highly accurate Size: 12"
    B3129
    Now: $3.99
    Was: $4.49
    Add to Cart
  • PRECISION MARKING RULE 12IN. INCRA

    Incra

    PRECISION MARKING RULE 12IN. INCRA

    Now: $18.99
    Was: $20.99
    INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE12
    Now: $18.99
    Was: $20.99
  • PRECISION MARKING RULE 6IN. INCRA

    Incra

    PRECISION MARKING RULE 6IN. INCRA

    Now: $10.49
    Was: $11.99
    INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE06
    Now: $10.49
    Was: $11.99
    Add to Cart
  • STEEL RULE 24IN. STAINLESS

    $7.99
    Stainless Steel Rules 24" Stainless steel clearly graduated in 1/2mm and millimetres on the metric side; and 16ths, 32nds and 64ths on the imperial side.
    B1931
    $7.99
    Add to Cart
  • DIGITAL CALIPER 12IN. /300MM IGAGING

    Igaging

    DIGITAL CALIPER 12IN. /300MM IGAGING

    Now: $95.00
    Was: $110.00
    B315812 12" Digital Calliper - iGaging Easy to Read Super Large Display LCD Quick measure speed at 120” per second Water, oil and dust resistance Hardened stainless steel Inside & Outside measures Precision lapping finish Accuracy: 0.0015”/6”...
    B315812
    Now: $95.00
    Was: $110.00
    Add to Cart
  • CALIPER DIAL 8IN. 0.001

    CALIPER DIAL 8IN. 0.001

    Now: $45.00
    Was: $51.99
    8" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...
    B10568
    Now: $45.00
    Was: $51.99
    Add to Cart
  • HOLDER MAG BASE FINE ADJ.

    HOLDER MAG BASE FINE ADJ.

    $26.99
    Magnetic Holder With Fine Adjustment Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|
    B303
    $26.99
    Add to Cart
  • Igaging

    DIGITAL DEPTH GAUGE 2 IN 1 IGAGING

    Now: $36.99
    Was: $39.99
    B3258 2 in 1 Digital Depth Gauge - iGaging Absolute encoding technology Memorize origin zero position 3 way reading: Inch, Fraction & Metric IP54 drop water & dust resistant Spring load travel, lug back SPC USB data output available Electronic...
    B3258
    Now: $36.99
    Was: $39.99
    Add to Cart
  • DIGITAL FENCE READOUT WIXEY

    Wixey Digital

    DIGITAL FENCE READOUT WIXEY

    Now: $145.00
    Was: $175.00
    Getting an exact readout on your table fence means never having to guess again. This precise digital readout easily mounts to Beisemeyer, Align-A-Rip, Accu Square, Jet, HTC and other T-square fences as well as the Delta Unifence, DeWalt, Vega and other...
    WR700
    Now: $145.00
    Was: $175.00
  • PRECISION T RULE 6IN. INCRA

    Incra

    PRECISION T RULE 6IN. INCRA

    Now: $29.99
    Was: $32.99
    INCRA T-RULE 6" Incra T-Rules make it very easy to draw exact lines in either direction. INCRA scores again with its precision steel rule . Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. ...
    TRULE06
    Now: $29.99
    Was: $32.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley