Measuring Tools

Measuring Tools

  • CALIPER DIAL 8IN. 0.001

    CALIPER DIAL 8IN. 0.001

    Now: CAD $44.99
    Was: $59.99
    8" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...
    B10568
    Now: CAD $44.99
    Was: $59.99
    Add to Cart
  • HOLDER MAG BASE FINE ADJ.

    HOLDER MAG BASE FINE ADJ.

    Now: CAD $19.99
    Was: $26.99
    Magnetic Holder With Fine Adjustment Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|
    B303
    Now: CAD $19.99
    Was: $26.99
    Add to Cart
  • 10IN. DIGITAL RULE AND PROTRACTOR IGAGING

    Igaging

    10IN. DIGITAL RULE AND PROTRACTOR IGAGING

    Now: CAD $30.99
    Was: $34.99
    ÿþB3128 10" Rule and 8" Digital Protractor - iGaging Stainless steel rule blades with mm and 1/64 , 1/32 and 1/64 scales Strong/firm lock Hold function Reversible reading Inside & Outside angle measure Easy to use & easy to carry Light...
    B3128
    Now: CAD $30.99
    Was: $34.99
    Add to Cart
  • MEASURING TAPE 12FT SELF ADHESIVE L R RDNG

    Kreg

    MEASURING TAPE 12FT SELF ADHESIVE L R RDNG

    CAD $13.99
    KMS7724 1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing,...
    KMS7724
    CAD $13.99
    Add to Cart
  • Igaging

    DIGITAL DEPTH GAUGE 2 IN 1 IGAGING

    Now: CAD $34.99
    Was: $39.99
    B3258 2 in 1 Digital Depth Gauge - iGaging Absolute encoding technology Memorize origin zero position 3 way reading: Inch, Fraction & Metric IP54 drop water & dust resistant Spring load travel, lug back SPC USB data output available Electronic...
    B3258
    Now: CAD $34.99
    Was: $39.99
    Add to Cart
  • PRECISION T RULE 6IN. INCRA

    Incra

    PRECISION T RULE 6IN. INCRA

    Now: CAD $28.99
    Was: $32.99
    INCRA T-RULE 6" Incra T-Rules make it very easy to draw exact lines in either direction. INCRA scores again with its precision steel rule . Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. ...
    TRULE06
    Now: CAD $28.99
    Was: $32.99
  • DIGITAL FENCE READOUT WIXEY

    Wixey Digital

    DIGITAL FENCE READOUT WIXEY

    Now: CAD $175.00
    Was: $199.00
    Getting an exact readout on your table fence means never having to guess again. This precise digital readout easily mounts to Beisemeyer, Align-A-Rip, Accu Square, Jet, HTC and other T-square fences as well as the Delta Unifence, DeWalt, Vega and other...
    WR700
    Now: CAD $175.00
    Was: $199.00
    Add to Cart
  • HEIGHT GAUGE MINI WIXEY DIGITAL

    Wixey Digital

    HEIGHT GAUGE MINI WIXEY DIGITAL

    Now: CAD $29.99
    Was: $34.99
    WR25 Height Gauge Mini Barry - WIXEY The large easy to read display reads in inches with fractions or millimetres. The fractions are displayed using "Precise Fraction Technology" which gives you 4 times the accuracy of other fraction readouts. The...
    WR25
    Now: CAD $29.99
    Was: $34.99
    Add to Cart
  • 12IN. HOOKED RULER 4R IGAGING

    Igaging

    12IN. HOOKED RULER 4R IGAGING

    Now: CAD $16.99
    Was: $20.99
    B3127 12" Hooked Rule 4R - iGaging Hardened Stainless, Satin Chrome, 4R Scale Adjustable hook can be used on both sides High accuracy
    B3127
    Now: CAD $16.99
    Was: $20.99
    Add to Cart
  • HOLDER UNIVERSAL INDICATOR

    HOLDER UNIVERSAL INDICATOR

    Now: CAD $14.99
    Was: $17.99
    Indicator Holder (Universal) Clamping dia.: 1 7/8" Length to indicator: 4 1/2" Mounts directly on machine quill Fits all indicators with 5/32" shank Indicator not included
    B2129
    Now: CAD $14.99
    Was: $17.99
    Add to Cart
  • PROTRACTOR/DEPTH GAUGE ROUND 0 180DEG

    PROTRACTOR/DEPTH GAUGE ROUND 0 180DEG

    CAD $9.99
    B3018 Protractor and Depth Gauge Two tools in one, this protractor and depth gauge allows to measure the angles and depths quickly and easily. The protractor features 0-180-degrees and the depth gauge is 6" long and has graduations in 32nds and 64ths...
    B3018
    CAD $9.99
    Add to Cart
  • PRECISION RULE 12IN. INCRA

    Incra

    PRECISION RULE 12IN. INCRA

    Now: CAD $37.99
    Was: $41.99
    INCRA T-RULE 12" Incra T-Rules make it very easy to draw exact lines in either direction. INCRA scores again with its precision steel rule Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. ...
    TRULE12
    Now: CAD $37.99
    Was: $41.99
    Add to Cart
  • DIGITAL READOUT FOR PLANERS WIXEY

    Wixey Digital

    DIGITAL READOUT FOR PLANERS WIXEY

    Now: CAD $93.99
    Was: $105.00
    WIXEY DIGITAL READOUT IMPROVED VERSION The Wixey Planer Digital Readout model WR510 has a new angled display for easy viewing as well as "auto shut off." And like the WR500, it fits most portable woodworking planers. It easily mounts to Craftex,...
    WR510
    Now: CAD $93.99
    Was: $105.00
    Add to Cart
  • 8IN. VERNIER CALIPER 0.001/0.02

    8IN. VERNIER CALIPER 0.001/0.02

    Now: CAD $42.99
    Was: $55.00
    Vernier Caliper - 8" Made of tool steel throughout, for outside, inside and depth measurements Satin chrome finish prevent rust and wear Raised sliding surfaces prevent defacement and wear of graduations: clear black engravings Hardened measuring...
    B10558
    Now: CAD $42.99
    Was: $55.00
    Add to Cart
  • CALIPER DIAL 6IN. 0.001

    CALIPER DIAL 6IN. 0.001

    CAD $45.00
    6" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...
    B10566
    CAD $45.00
    Add to Cart
  • 6IN. HOOKED RULER 4R IGAGING

    Igaging

    6IN. HOOKED RULER 4R IGAGING

    Now: CAD $9.99
    Was: $12.99
    B3126 6" Hooked Rule 4R - iGaging Hardened Stainless, Satin Chrome, 4R Scale Adjustable hook can be used on both sides High accuracy
    B3126
    Now: CAD $9.99
    Was: $12.99
    Pre-Order Now
  • DIGITAL REMOTE READOUT 0 12IN. IN/ METRIC

    Igaging

    DIGITAL REMOTE READOUT 0 12IN. IN/ METRIC

    CAD $59.99
    B313612 0-12” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display Magnetic & Clamp hardware on remote...
    B313612
    CAD $59.99
    Add to Cart
  • MICROMETER SET 0 6IN. 0.0001

    MICROMETER SET 0 6IN. 0.0001

    Now: CAD $219.00
    Was: $259.99
    Micrometer Sets 6pcs. Measurements in .0001" Positive locking clamps Carbide-tipped faces Micro-fine satin-chrome graduations Quick and easy zero setting adjustment Friction thimble for exact reading Size: 0 -6" Complete in a wooden box
    B105206
    Now: CAD $219.00
    Was: $259.99
    Add to Cart
  • MICROMETER SET 0 3IN. 0.0001

    MICROMETER SET 0 3IN. 0.0001

    Now: CAD $95.00
    Was: $105.00
    Micrometer Set Size: 0 - 3" Qty: 3 pc. Measurements in 0.001" Positive locking clamps Carbide tipped faces Micro-fine satin chrome graduations Quick and easy zero setting adjustment Ratchet stop for exact reading
    B105203
    Now: CAD $95.00
    Was: $105.00
    Add to Cart
  • CENTRE GAUGE

    CENTRE GAUGE

    CAD $4.99
    Centre Gauge 60° Assure proper set up when threading. Tempered stainless tool steel. Satin chrome finish, no glare. Graduated in 14th and 20th on one side, and 24th and 32nd on the other. Notches have clearance slots. Table for double depth American...
    B2293
    CAD $4.99
    Add to Cart
  • STEEL RULE METRIC 300MM

    STEEL RULE METRIC 300MM

    Now: CAD $2.99
    Was: $3.29
    B1813 300mm Stainless Steel Rule This stainless steel rule is clearly graduated in 1/2mm, millimeters, 1/2cm, and centimeters. Excellent and handy tool for precise and quick measurement!
    B1813
    Now: CAD $2.99
    Was: $3.29
    Add to Cart
  • MITER GAUGE WITH 120 ANGLELOCK STOPS

    Incra

    MITER GAUGE WITH 120 ANGLELOCK STOPS

    Now: CAD $119.00
    Was: $129.00
    Miter Gauge V120 - INCRA The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two...
    MITERV120
    Now: CAD $119.00
    Was: $129.00
    Add to Cart
  • Igaging

    DIAL INDICATOR DIGITAL 0 1IN. THREE READING

    Now: CAD $49.99
    Was: $59.99
    Digital Indicator This digital indicator replaces the "dial indicator" with advanced and more accurate readings. This unit features 3 way readings in inch, metric and fraction. Other unique features include ABS, HOLD function and Data Output to PC...
    B2872
    Now: CAD $49.99
    Was: $59.99
    Add to Cart
  • GUAGE INCRA

    Incra

    GUAGE INCRA

    Now: CAD $19.50
    Was: $20.99
    INCRA Gauge Works as a precision marking gauge, a freestanding depth-of-cut gauge, a fence alignment gauge and a center finder. This easy to use gauge will offer dozens of uses in your projects and become an indispensable layout tool for your workshop.
    IG32
    Now: CAD $19.50
    Was: $20.99
    Add to Cart
  • WIRE AND SHEET METAL GAUGE

    Groz

    WIRE AND SHEET METAL GAUGE

    CAD $25.99
    Wire & Sheet Metal Gauge Hardened steel. Deep etched graduations. Surface ground. Inch and metric: 3 3/8” dia. x 1/16” approx.
    B629
    CAD $25.99
    Add to Cart
  • HOLDER MAG BASE 052287 J339/340

    HOLDER MAG BASE

    Now: CAD $19.99
    Was: $26.99
    Standard Magnetic Holder Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|
    B223
    Now: CAD $19.99
    Was: $26.99
    Add to Cart
  • MICROMETER METRIC/MILLIMETER

    MICROMETER METRIC/MILLIMETER

    CAD $26.99
    Metric and Millimeter Micrometer This micrometer measures from 0-1" in 0.001"increments. The scale can be read in both metric and millimeters. Precision tooling when accuracy is a must.
    B105101M
    CAD $26.99
    Add to Cart
  • DIAL INDICATOR TYPE A1 911 1/2IN. TRAVEL

    DIAL INDICATOR TYPE A1 911 1/2IN. TRAVEL

    CAD $23.99
    Dial Indicator 2" Dia. Face - 1/2" Travel These dial gauges fit all standard magneticc bases| Satin chrome-plated case Easy-to-read faces .001" reading Precision ground hard chrome-plated stem and contact point
    B443
    CAD $23.99
    Add to Cart
  • DIGITAL REMOTE READOUT 0 36IN. IN/ METRIC

    Igaging

    DIGITAL REMOTE READOUT 0 36IN. IN/ METRIC

    Now: CAD $85.00
    Was: $99.99
    B313635 0-35” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display Magnetic & Clamp hardware on remote...
    B313635
    Now: CAD $85.00
    Was: $99.99
    Add to Cart
  • ANGLE RULE AND GAUGE 4IN. MULTI PURPOSE

    ANGLE RULE AND GAUGE 4IN. MULTI PURPOSE

    CAD $11.99
    B3099 Multipurpose Angle Protractor This multipurpose tool can be used as a protractor, a center finder, a square, a circle divider and a drill point gauge. The tool is constructed of high quality stainless steel and features clear embossed markings...
    B3099
    CAD $11.99
    Add to Cart
  • ANGLE GAUGE DIGITAL WIXEY

    Wixey Digital

    ANGLE GAUGE DIGITAL WIXEY

    Now: CAD $42.99
    Was: $48.99
    WR300 WIXEY Digital Angle Gauge (TYPE 2) The Wixey Digital Angle Gauge accurately sets saw blade bevel angle. 0.1 degree resolution Works great for miter saws and table saws Sets the angle of jointer fences and band saw tables Super strong magnets...
    WR300
    Now: CAD $42.99
    Was: $48.99
    Add to Cart
  • ANGLE FINDER MULTI PURPOSE ALUMINIUM

    ANGLE FINDER MULTI PURPOSE ALUMINIUM

    Now: CAD $30.99
    Was: $37.50
    Angle Finder (Professional) Anodized aluminum construction with stainless steel pivots ensures strength and durability of the angle finder. The horizontal scale is 20" long and the rotating scale is 9" long and a plastic pouch is included for storage. ...
    B1730AL
    Now: CAD $30.99
    Was: $37.50
    Add to Cart
  • MEASURING TAPE 12FT SELF ADHESIVE R L RDNG

    Kreg

    MEASURING TAPE 12FT SELF ADHESIVE R L RDNG

    CAD $13.99
    KMS7723 1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing,...
    KMS7723
    CAD $13.99
    Add to Cart
  • MITER GAUGE 1000HD WITH 18IN. TO 30IN.

    Incra

    MITER GAUGE TELESCOPING FENCE 18IN. TO 31IN.

    Now: CAD $245.00
    Was: $279.00
    MITER1000HD Miter Gauge 1000 High Definition - INCRA The NEW INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition; because the protractor plate's exclusive AngleLOCK Indexing System has a...
    MITER1000HD
    Now: CAD $245.00
    Was: $279.00
    Add to Cart
  • MITRE GAUGE 1000SE INCRA

    Incra

    MITRE GAUGE 1000SE INCRA

    Now: CAD $209.00
    Was: $249.00
    MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...
    MITER1000SE
    Now: CAD $209.00
    Was: $249.00
    Add to Cart
  • STEEL RULE 6IN. STAINLESS

    STEEL RULE 6IN. STAINLESS

    CAD $1.99
    Stainless Steel Rules 6" Stainless steel clearly graduated in 1/2mm and millimetres on the metric side; and 16ths, 32nds and 64ths on the imperial side. Note: B1813 is graduated only in metric
    B537
    CAD $1.99
    Add to Cart
  • SAW STEP GAUGE

    SAW STEP GAUGE

    CAD $7.99
    Saw Step Gauge Heavy Gauge Aluminum Our step gauge gives you an exact setting, the first time, regardless of width or set of the blade. More accurate than any ruler. It will set your rip fence, your radial or table saw depth of cut and measure groove...
    B897
    CAD $7.99
    Add to Cart
  • MITRE GAUGE 1000 INCRA

    Incra

    MITRE GAUGE 1000 INCRA

    Now: CAD $165.00
    Was: $185.00
    MITER100018T INCRA MITER GAUGE 1000 If you are looking for a great combination of basic affordability combined with unbeaten accuracy, the INCRA Miter 1000 is a terrific choice. We combined a solid-steel laser cut protractor head with a gold anodized...
    MITER100018T
    Now: CAD $165.00
    Was: $185.00
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley