null

Metalworking

Metalworking

  • COLLET SET MT3 11 PC

    COLLET SET MT3 11 PC

    CAD $235.99
    MT3 Collet Set 11pc These collets are very useful when the distance between machine-table and spindle is limited. The back of the collet is threaded to accept standard 3/8" drawbar. Includes the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16",...
    B360
    CAD $235.99
    Add to Cart
  • SLEEVE MT2/MT1

    SLEEVE MT2/MT1

    CAD $10.99
    R8 And Morse Taper Sleeves - From MT2 to MT1 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT2 to MT1
    B343
    CAD $10.99
    Add to Cart
  • SLEEVE MT3/MT2

    SLEEVE MT3/MT2

    CAD $10.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT3 to MT2
    B342
    CAD $10.99
    Add to Cart
  • MILLING TABLE 5IN. X 12IN.

    MILLING TABLE 5IN. X 12IN.

    CAD $239.00
    H. D. Cross Sliding Table This heavy-duty compound slide table can be used for several applications e.g. positioning, milling, line drilling & optical viewing. Specifications Table surface: 5 1/2" x 12" Table Cross Travel: 5" Table Longitudinal...
    B339C
    CAD $239.00
    Add to Cart
  • DRIFT KEY MT2 3

    DRIFT KEY MT2 3

    CAD $6.99
    This Drift Key quickly removes taper shank drills or reamers from sleeves or sockets.  For use with MT2 – MT3 Made of top quality hardened steel
    B299
    CAD $6.99
    Add to Cart
  • KEY TORK T 15

    KEY TORK T 15

    CAD $2.99
    T-15 Torx Key This Torx Key is manufactured from SNCM steel hardened and tempered with chemically blacked finish for corrosion protection.
    B2895K
    CAD $2.99
    Add to Cart
  • TUBE CENTRE MT3

    TUBE CENTRE MT3

    CAD $129.00
    Tubing Center This well constructed tubing center is ideal for hollow work pieces like pipes & tubing. With sealed ball bearing you don't have to worry about dust getting in. MT3 Large Diameter: 3" Small Diameter: 3/4"
    B2829
    CAD $129.00
    Add to Cart
  • KEY TORK T 6

    KEY TORK T 6

    CAD $2.99
    T-6 Torx Key This Torx Key is manufactured from SNCM steel hardened and tempered with chemically blacked finish for corrosion protection.
    B2817K
    CAD $2.99
    Add to Cart
  • KNURLING TOOL NO. 6

    Groz

    KNURLING TOOL NO. 6

    CAD $65.00
    Knurling Tools Diamond Pattern H.S.S. Knurls Only Shank Size, Knurl Size, No. Of Knurls 5" x 3/4" x 5/16", 5/8" x 5/16" x 7/32", 6
    B279
    CAD $65.00
    Add to Cart
  • SLEEVE R8/MT2

    SLEEVE R8/MT2

    CAD $17.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT2
    B273
    CAD $17.99
    Add to Cart
  • RAPID INDEXER 6IN. BASE WITH 3 JAW CHUCK

    RAPID INDEXER 6IN. BASE WITH 3 JAW CHUCK

    Now: CAD $285.00
    Was: $299.00
    RAPID INDEXER 3 Jaw Chuck 3 3/16" Useful for 2 direction horizontal & vertical milling & drilling operations. It has a 3 jaw chuck fitted on the head for big range clamping. The indexer has a simple rapid operation with dividual number 24 - notch (15...
    B2725
    Now: CAD $285.00
    Was: $299.00
    Add to Cart
  • ROTARY TABLE 4IN. HOR/VER

    ROTARY TABLE 4IN. HOR/VER

    Now: CAD $169.00
    Was: $185.00
    B2724 Horizontal/Vertical Rotary Table 4” This rotary table is ideal for milling and multi-purpose work and anyone creating smaller precision work. The table features a whole degree scale on the dial, lash adjustment screw, worm gear drive, reference...
    B2724
    Now: CAD $169.00
    Was: $185.00
    Add to Cart
  • SLEEVE R8/MT3

    SLEEVE R8/MT3

    CAD $17.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT3
    B272
    CAD $17.99
    Pre-Order Now
  • PARTING TOOL WITH BLADE 3/4IN.

    PARTING TOOL WITH BLADE 3/4IN.

    CAD $36.99
    Parting Tool w/3/4" Blade This two piece holder will give superb holding power. Comes with a 3/4" HSS blade. Holder size: 1/2" x 1" x 2 3/16" Blade size: 1/8" x 3/4" x 5"
    B2719
    CAD $36.99
    Pre-Order Now
  • PARTING TOOL WITH BLADE 1/2IN.

    PARTING TOOL WITH BLADE 1/2IN.

    CAD $27.99
    Parting Tool w/1/2" Blade This two piece holder will give superb holding power. Comes with a 1/2" HSS blade. Holder size:1/2" x 3/4'x 2 3/16 Blade size: 3/32" x 1/2" x 4"
    B2718
    CAD $27.99
    Pre-Order Now
  • MILLING VISE LOW PROFILE 1 7/8IN.

    MILLING VISE LOW PROFILE 1 7/8IN.

    CAD $109.00
    B2715 Precision Tool Makers Vise This high precision toolmakers vise is manufactured from hardened 55-60 HRC tool steel & is high precision ground. The vise has recessed pockets at both ends for clamping. Ideal for milling machines and mini mills like...
    B2715
    CAD $109.00
    Add to Cart
  • CHUCK 3 1/4IN. 3 JAW

    CHUCK 3 1/4IN. 3 JAW

    Now: CAD $159.00
    Was: $169.00
    3 JAW CHUCK SELF CENTERING W/ ALUMINIUM PLATE This self-centering 3 Jaw Chuck is perfect for 4" Rotary Tables. It is on a precision specially made backplate & the chuck includes inside & outside jaws as well as keys.
    B2711
    Now: CAD $159.00
    Was: $169.00
    Add to Cart
  • CHUCK 3 1/4IN. 4 JAW

    CHUCK 3 1/4IN. 4 JAW

    Now: CAD $109.00
    Was: $129.00
    4 JAW CHUCK WITH ALUMINIUM PLATE 4 Jaw independent chuck mounted on a specially made plate with 4 slots to allow an easy fit to the table. Chuck Diameter is 3 1/8" and the chuck body is 1 1/8"
    B2710
    Now: CAD $109.00
    Was: $129.00
    Pre-Order Now
  • ELECTRONIC EDGE FNDER

    Groz

    ELECTRONIC EDGE FINDER

    CAD $49.99
    Electronic Edge Finder - GROZ This edge finder is an accurate and time saving tool for precisely locating work edges, shoulders, grooves etc. Ideal for use on both conventional and CNC equipment. The edge finder lights up instantly when the stylus...
    B2700
    CAD $49.99
    Add to Cart
  • ROTARY TABLE 3IN. HORIZONTAL AND VERTICAL

    ROTARY TABLE 3IN. HORIZONTAL AND VERTICAL

    Now: CAD $135.00
    Was: $149.00
    3" Rotary Table Horizontal/Vertical This low profile rotary table is precision made with fully ground finish can be used horizontally or vertically. The table rotates 360 with a 1:36 ratio or 10 per hand wheel revolution.
    B2686
    Now: CAD $135.00
    Was: $149.00
    Pre-Order Now
  • KNURLING TOOL FOR MINI LATHE

    KNURLING TOOL FOR MINI LATHE

    CAD $36.99
    Knurling Tool Clamping Type This is great for knurling as the tool holder absorbs all the pressure. This also relieves any undue strain on the lathe bearings. This knurling tool is ideal for mini lathes. Holder size: 3/8” x 3/8” x 2 1/4” Working...
    B2678
    CAD $36.99
    Add to Cart
  • KNURLING TOOL CLAMPING TYPE 3/8IN.

    KNURLING TOOL CLAMPING TYPE 3/8IN.

    CAD $36.99
    3/8” Knurling Tool Clamping Type This is great for knurling as the tool holder absorbs all the pressure. This also relieves any undue strain on the lathe bearings. Holder size: 3/8” x 3/8” x 5 3/4” Working Capacity: 1/8” to 1”
    B267738
    CAD $36.99
    Add to Cart
  • DRILL PRESS TABLE

    Craftex

    DRILL PRESS TABLE B2660

    CAD $85.00
    Drill Press Table This Universal drill press table is designed to fit most drill press models. The large table has a quick clamping system that will not damage your original tabletop and adds versatility to your press by giving you a larger work space...
    B2660
    CAD $85.00
    Pre-Order Now
  • CIRCLE CUTTER WITH FINE ADJUSTMENT 8IN.

    CIRCLE CUTTER WITH FINE ADJUSTMENT 8IN.

    CAD $45.00
    Adjustable Circle Cutter This cutter will cut circles from 1 1/2" to 8". The knurled knob has ten divisions each representing 1/200th inch movement of the center body. With this Micro Adjustment no need to guess anymore. This circle cutter is ideal for...
    B2608
    CAD $45.00
    Add to Cart
  • CIRCLE CUTTER WITH FINE ADJUSTMENT6 1/2IN.

    CIRCLE CUTTER WITH FINE ADJUSTMENT6 1/2IN.

    CAD $39.99
    Adjustable Circle Cutter This cutter will cut circles from 1 1/2" to 6 1/2". The knurled knob has ten divisions each representing 1/200th inch movement of the center body. With this Micro Adjustment no need to guess anymore. This circle cutter is ideal...
    B2607
    CAD $39.99
    Add to Cart
  • STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Groz

    STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Now: CAD $36.99
    Was: $42.99
    4pc Steel Square Set Made by "GROZ" Sizes: 2", 3", 4" & 6" Hardened spring steel fixed to the stock with tapered self-locking rivets Blade and stock precision ground Working edges of the blade are lapped to increased accuracy
    B2582
    Now: CAD $36.99
    Was: $42.99
    Add to Cart
  • BORING HEAD SET 3/8IN. W/R8 ARBOR AND CUTTER

    BORING HEAD SET 3/8IN. W/R8 ARBOR AND CUTTER

    Now: CAD $145.00
    Was: $155.00
    Boring Head Rugged construction for chatter-free boring and accuracy Bar holder moves freely and smoothly. When locked in place it holds firmly against tool-cutting pressures Micrometer lead-screw provides .001" direct reading accuracy With R8 arbor and...
    B2552
    Now: CAD $145.00
    Was: $155.00
    Add to Cart
  • VISE 5IN. DRILL PRESS

    VISE 5IN. DRILL PRESS

    CAD $43.99
    5" Drill Press Vise Cast iron base with 5" hardened steel jaws 5/8" acme thread knurled handle with tightening pin 7 1/2" wide Weight: 7kg.
    B2541
    CAD $43.99
    Add to Cart
  • CLAMP D/PRESS HOLD DOWN 4 3/4IN. HT.

    CLAMP D/PRESS HOLD DOWN 4 3/4IN. HT.

    CAD $36.99
    Quick Drill Press Hold Down This hold down fits to most drill press tables with slots or holes. The hold down easily adjusts with 5" of capacity. The cam-action on the clamp head gives superior hold down pressure ensuring a safer clamp. Rubber foot...
    B2539
    CAD $36.99
    Add to Cart

Metalworking Tools & Equipment

Busy Bee Tools sells metalworking equipment that professionals and serious hobbyists can rely on to get the job done. Our huge selection allows you to complete your metalworking projects, or care for your tools, with the methods that best suit you.

We have a wide selection of metal cutting tools and tools designed to remove material from your project. Check out our quality metalworking bandsaws, metal grinders, metal grinder wheels and metal belt sanders. For projects that could be ruined by exposure to too much heat, choose a slow grinder. Or, shape your metal with a metalworking lathe.

Those who fabricate sheet metal can choose from our wide selection of sheet metal tools such as metal brakes, sheet metal shears, metal hand shears and sheet metal machines.

Punching holes in your metal projects is made simple with our metal drills and metal drill presses.

For drilling, milling and facing, Busy Bee Tools carries a range of high-quality metal milling machines, including mini-mills for those with limited space.

Any selection of metalworking tools would be incomplete without welding tools. Our welding equipment includes amps, electrode holders, cutting tips and more.

Lastly, to hold your precious projects in place while you work on them, we carry high-quality metalworking vises that provide superior grip and peace of mind.

Find every metalworking tool or piece of metalworking equipment you need in the quality selection available from Busy Bee Tools.

 

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley