Metalworking

Metalworking

  • SLEEVE R8/MT2

    SLEEVE R8/MT2

    CAD $15.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT2
    B273
    CAD $15.99
    Add to Cart
  • SLITTING SAW 3 X 1/8

    SLITTING SAW 3 X 1/8

    Now: CAD $15.99
    Was: $22.99
    T747075 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/8"
    T747075
    Now: CAD $15.99
    Was: $22.99
    Add to Cart
  • MORTISING ATTACHMENT KIT

    Craftex

    MORTISING ATTACHMENT KIT CT132

    Now: CAD $72.99
    Was: $88.99
    Mortising Attachment & Chisel Set for your drill press Durable cast iron & steel Contains: 1 - Fence 1 - Hold down 2 - Hold in 1 - Chisel holder (65mm) 4 - Mortising chisels & bits 1/4", 5/8", 3/8" & 1/2" 4 Plastic Quill Rings - 40mm, 52...
    CT132
    Now: CAD $72.99
    Was: $88.99
    Add to Cart
  • ARBOR MT2/J33

    ARBOR MT2/J33

    Now: CAD $5.99
    Was: $7.99
    Drill Chuck Arbors Precision hardened and ground Tool Steel Taper: MT2-JT33
    B111
    Now: CAD $5.99
    Was: $7.99
    Add to Cart
  • DRILL STOPS 7PC SET

    DRILL STOPS 7PC SET

    Now: CAD $2.99
    Was: $3.99
    Drill Stops 7pc Set A Handy Item For Any Shop| Adjust to exact depth and prevent over-drilling Eliminate guess work and avoid costly errors Fits drill: 1/8",3/16",1/4",5/16",3/8",7/16" and 1/2"
    B734
    Now: CAD $2.99
    Was: $3.99
    Add to Cart
  • LIVE CENTRE MT4

    LIVE CENTRE MT4

    Now: CAD $58.50
    Was: $71.99
    PRECISION LIVE CENTRES - MT 4 2 1/4 lbs. Twin bearing mechanism Centre shaft and housing hardened & ground Housing made of special steel
    B072
    Now: CAD $58.50
    Was: $71.99
    Add to Cart
  • COLLET 3/8IN. 5C

    COLLET 3/8IN. 5C

    Now: CAD $8.29
    Was: $9.99
    Precision 5C Collet - 3/8" These collets feature the same high-grade steels and tolerances as the R8 collets. 1 1/4" x 20 TPI
    B185
    Now: CAD $8.29
    Was: $9.99
  • COLLET 1/2IN. 5C

    COLLET 1/2IN. 5C

    Now: CAD $8.29
    Was: $9.99
    Precision 5C Collet - 1/2" These collets feature the same high-grade steels and tolerances as the R8 collets. 1 1/4" x 20 TPI
    B187
    Now: CAD $8.29
    Was: $9.99
  • CIRCLE CUTTER WITH FINE ADJUSTMENT 8IN.

    CIRCLE CUTTER WITH FINE ADJUSTMENT 8IN.

    CAD $45.00
    Adjustable Circle Cutter This cutter will cut circles from 1 1/2" to 8". The knurled knob has ten divisions each representing 1/200th inch movement of the center body. With this Micro Adjustment no need to guess anymore. This circle cutter is ideal for...
    B2608
    CAD $45.00
    Add to Cart
  • COLLET MT3 1/2IN.

    COLLET MT3 1/2IN.

    Now: CAD $16.99
    Was: $20.99
    MT3 Collet Hardened and ground Fits 3/8" x 16 TPI drawbar Size: 1/2"
    B360012
    Now: CAD $16.99
    Was: $20.99
    Add to Cart
  • MILLING TABLE 5IN. X 12IN.

    MILLING TABLE 5IN. X 12IN.

    Now: CAD $199.00
    Was: $225.00
    H. D. Cross Sliding Table This heavy-duty compound slide table can be used for several applications e.g. positioning, milling, line drilling & optical viewing. Specifications Table surface: 5 1/2" x 12" Table Cross Travel: 5" Table Longitudinal...
    B339C
    Now: CAD $199.00
    Was: $225.00
    Add to Cart
  • Craftex

    DRILL PRESS RADIAL 1/2HP CSA CRAFTEX CT020N

    Now: CAD $419.00
    Was: $465.00
    Radial Drill Press, Bench Model, 1/2 HP This radial bench top drill press is quite a versatile machine. Allowing you to complete various operations using only your drill press, it has become indispensable in the shop. Features Rack and pinion raising...
    CT020N
    Now: CAD $419.00
    Was: $465.00
  • CHUCK 3 1/4IN. 3 JAW

    CHUCK 3 1/4IN. 3 JAW

    Now: CAD $155.00
    Was: $169.00
    3 JAW CHUCK SELF CENTERING W/ ALUMINIUM PLATE This self-centering 3 Jaw Chuck is perfect for 4" Rotary Tables. It is on a precision specially made backplate & the chuck includes inside & outside jaws as well as keys.
    B2711
    Now: CAD $155.00
    Was: $169.00
    Add to Cart
  • SLITTING SAW 3 X 1/32

    SLITTING SAW 3 X 1/32

    Now: CAD $11.99
    Was: $18.99
    T747045 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/32"
    T747045
    Now: CAD $11.99
    Was: $18.99
    Add to Cart
  • 6IN. BUFFER 3/4HP CRAFTEX

    Craftex

    6IN. BUFFER 3/4HP CRAFTEX CT188

    Now: CAD $109.00
    Was: $135.00
    ÿþCT188 6" Buffer - Craftex The CT188 features a powerful 3/4HP motor which operates at 3450 RPM and is a great tool for buffing and polishing wood, plastics, rocks, brass, copper, metals, jewellery. FEATURES Powerful 3/4 HP, 4.8 amp. motor operates...
    CT188
    Now: CAD $109.00
    Was: $135.00
    Add to Cart
  • COLLET MT3 3/4IN.

    COLLET MT3 3/4IN.

    Now: CAD $16.99
    Was: $20.99
    MT3 Collet Hardened and ground Fits 3/8" x 16 TPI drawbar Size: 3/4"
    B360034
    Now: CAD $16.99
    Was: $20.99
    Add to Cart
  • ARBOR SLITTING SAW

    Groz

    ARBOR SLITTING SAW

    Now: CAD $20.99
    Was: $24.99
    Slitting Saw Arbor Spring loaded mechanism Fits all sizes from 1/2" to 1" bore Shank dia.: 1/2"
    B044
    Now: CAD $20.99
    Was: $24.99
    Add to Cart
  • DRILL PRESS VISE 4IN.

    DRILL PRESS VISE 4IN.

    Now: CAD $17.99
    Was: $21.99
    Drill Press Vise High grade cast iron Fast position hinged handle A necessity for drilling Hold your work secure Size Weight 4" 3.5 kg.
    B067
    Now: CAD $17.99
    Was: $21.99
    Add to Cart
  • BORING BAR SET 1/2IN.

    BORING BAR SET 1/2IN.

    Now: CAD $24.99
    Was: $29.99
    9pc Precision Boring Bar Set Precision ground shanks Three lengths for each mini bore size High quality alloy steel for greater rigidity Carbide tip ground square with shank for flat bottom boring Offset taper to provide greater rigidity at cutting point...
    B081
    Now: CAD $24.99
    Was: $29.99
    Add to Cart
  • ROTARY TABLE 4IN. LOW PROFILE W/TILT.TABLE

    ROTARY TABLE 4IN. LOW PROFILE W/TILT.TABLE

    Now: CAD $185.00
    Was: $299.00
    Titling Rotary Table Ideal for engineering applications small enough to be mounted on small mills or on a lathe vertical slide or cross slide. The table tilts up to 90 degrees with a scale marked in 1-degree graduations. The table itself is graduated...
    B2424
    Now: CAD $185.00
    Was: $299.00
    Add to Cart
  • KEY TORK T 6

    KEY TORK T 6

    CAD $2.99
    T-6 Torx Key This Torx Key is manufactured from SNCM steel hardened and tempered with chemically blacked finish for corrosion protection.
    B2817K
    CAD $2.99
    Add to Cart
  • ELECTRONIC EDGE FNDER

    Groz

    ELECTRONIC EDGE FINDER

    Now: CAD $36.99
    Was: $49.99
    Electronic Edge Finder - GROZ This edge finder is an accurate and time saving tool for precisely locating work edges, shoulders, grooves etc. Ideal for use on both conventional and CNC equipment. The edge finder lights up instantly when the stylus...
    B2700
    Now: CAD $36.99
    Was: $49.99
    Add to Cart
  • SLEEVE R8/MT3

    SLEEVE R8/MT3

    CAD $14.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT3
    B272
    CAD $14.99
    Add to Cart
  • STUB ARBOR MT 3 X 1IN.

    Groz

    STUB ARBOR MT 3 X 1IN. B461

    Now: CAD $13.50
    Was: $16.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B461
    Now: CAD $13.50
    Was: $16.99
    Add to Cart
  • SLEEVE MT 4/3

    SLEEVE MT 4/3

    CAD $13.99
    R8 And Morse Taper Sleeves - From MT4 to MT3 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT4 to MT3
    B498
    CAD $13.99
    Add to Cart
  • FACING BIT CARBIDE TIPPED 5/16IN. C6

    FACING BIT CARBIDE TIPPED 5/16IN. C6

    Now: CAD $2.49
    Was: $3.29
    Square Carbide Tipped Brazed Tool Bits Grade 5 for Steel 1/4" - 1/2" long approx. 5/16" - 2 1/4" long approx. 3/8" - 2 1/2" long approx. 1/2" - 3 1/2" long approx. Style C Size: 5/16"
    B552C6
    Now: CAD $2.49
    Was: $3.29
    Pre-Order Now
  • TOOL BIT CARBIDE D6 C6

    TOOL BIT CARBIDE D6 C6

    Now: CAD $2.49
    Was: $3.29
    Square Carbide Tipped Brazed Tool Bits Grade 5 for Steel 1/4" - 1/2" long approx. 5/16" - 2 1/4" long approx. 3/8" - 2 1/2" long approx. 1/2" - 3 1/2" long approx. Style D Size: 3/8"
    B649C6
    Now: CAD $2.49
    Was: $3.29
    Add to Cart
  • 5 C COLLET FIXTURE

    5 C COLLET FIXTURE

    Now: CAD $95.00
    Was: $109.00
    5C Collet Fixture Collet does not move up or down, retains positive relation to base. With cam lock release. (Collet not included) Height: 3 3/4" Base: 5" x 3 5/8"
    B1963
    Now: CAD $95.00
    Was: $109.00
    Add to Cart
  • JAPANESE WATERSTONE 1 000 GRIT/6 000GRIT

    Woodstock

    JAPANESE WATERSTONE 1 000 GRIT/6 000GRIT

    Now: CAD $69.99
    Was: $79.99
    D1130 Waterstone 1000/6000 Woodworkers of all skill levels are turning to Japanese waterstones to keep their tool edges sharp. This is because waterstones cut more aggressively, and a sharp edge can be achieved much faster. Waterstones also polish as...
    D1130
    Now: CAD $69.99
    Was: $79.99
    Add to Cart
  • SLITTING SAW 3 X 1/16

    SLITTING SAW 3 X 1/16

    Now: CAD $13.99
    Was: $20.99
    T747055 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/16"
    T747055
    Now: CAD $13.99
    Was: $20.99
    Add to Cart
  • E.M. HOLDER MT 3 3/8

    E.M. HOLDER MT 3 3/8

    CAD $33.99
    Morse Taper End Mill Holder - Taper: 3, size 3/8" For Weldon Shank End mills Precision ground and hardened to 50 RC concentric with .0006" All morse taper holders are threaded for 3/8" - 16 Drawbar
    415430
    CAD $33.99
    Add to Cart
  • ARBOR R8/J3

    ARBOR R8/J3

    CAD $12.99
    Drill Chuck Arbors Precision hardened and ground Tool Steel Taper: R8-JT3
    B119
    CAD $12.99
    Add to Cart
  • ROTARY TABLE 4IN. HOR/VER

    ROTARY TABLE 4IN. HOR/VER

    Now: CAD $149.00
    Was: $185.00
    B2724 Horizontal/Vertical Rotary Table 4” This rotary table is ideal for milling and multi-purpose work and anyone creating smaller precision work. The table features a whole degree scale on the dial, lash adjustment screw, worm gear drive, reference...
    B2724
    Now: CAD $149.00
    Was: $185.00
    Add to Cart
  • STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Groz

    STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Now: CAD $29.99
    Was: $42.99
    4pc Steel Square Set Made by "GROZ" Sizes: 2", 3", 4" & 6" Hardened spring steel fixed to the stock with tapered self-locking rivets Blade and stock precision ground Working edges of the blade are lapped to increased accuracy
    B2582
    Now: CAD $29.99
    Was: $42.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley