Metalworking

Metalworking

  • BANDSAW METAL 9IN. X16IN. 1.5HP V/SP CSA

    Craftex CX Series

    BANDSAW METAL 9IN. X16IN. 1.5HP V/SP CSA

    Now: CAD $4,799.00
    Was: $5,499.00
    ÿþCX107 9" x 16", 1.5HP Metal Cutting Band Saw - Craftex CX-Series This metal cutting band saw is packed with lot of features and is designed to cut metal up to 9" x 16". The sliding ball bearing blade guides, hydraulic down feed and easy speed changes...
    CX107
    Now: CAD $4,799.00
    Was: $5,499.00
    Add to Cart
  • DRILL PRESS TABLE

    Craftex

    DRILL PRESS TABLE

    Now: CAD $59.99
    Was: $65.00
    Drill Press Table This Universal drill press table is designed to fit most drill press models. The large table has a quick clamping system that will not damage your original tabletop and adds versatility to your press by giving you a larger work space...
    B2660
    Now: CAD $59.99
    Was: $65.00
    Add to Cart
  • NUT T SLOT 5/16 18 4PC/PKT

    NUT T SLOT 5/16 18 4PC/PKT

    Now: CAD $4.99
    Was: $5.99
    Heat Treated Black Oxide Finished 4pc Sets T-Slot Nuts Size: 5/16" - 18 NC Imperfect thread in base to prevent damage to table slot
    B2302516
    Now: CAD $4.99
    Was: $5.99
    Add to Cart
  • SPIN INDEX 5 C

    SPIN INDEX 5 C

    Now: CAD $105.00
    Was: $120.99
    5C-Spin Index Features And Mechanism The indexing plate has 36 holes at 10" intervals, so permitting the dividing into 2, 3, 4, 6, 8, 12, 18 or 36 parts. Method Of Using Vernier Holes Example, Index 32o First place in 0o position of front plate and 0...
    B049
    Now: CAD $105.00
    Was: $120.99
    Add to Cart
  • ROTARY TABLE 6IN.

    ROTARY TABLE 6IN.

    Now: CAD $399.00
    Was: $429.00
    Rotary Table Horizontal/Vertical Type 6" This H.V. Rotary table is precision made with fully ground finish. The worm gear ratio is 1:90 and one turn of the handle moves the table by 4 degree. Microcollar is graduated in steps of 1 min. Ideal for use on...
    B061
    Now: CAD $399.00
    Was: $429.00
    Pre-Order Now
  • KNURLING TOOL FOR MINI LATHE

    KNURLING TOOL FOR MINI LATHE

    Now: CAD $33.99
    Was: $36.99
    Knurling Tool Clamping Type This is great for knurling as the tool holder absorbs all the pressure. This also relieves any undue strain on the lathe bearings. This knurling tool is ideal for mini lathes. Holder size: 3/8” x 3/8” x 2 1/4” Working...
    B2678
    Now: CAD $33.99
    Was: $36.99
    Add to Cart
  • ROTARY TABLE 6IN. C/W TAIL STOCK/INDEXING

    ROTARY TABLE 6IN. C/W TAIL STOCK/INDEXING B2485

    Now: CAD $509.00
    Was: $575.00
    6" Rotary Table, Horizontal/Vertical Fine grade cast iron Precision ground hardened worm Ratio: 90:1 360degree graduations Comes with Index Plates and Tail Stock
    B2485
    Now: CAD $509.00
    Was: $575.00
    Add to Cart
  • T/TOOL INSERT TYPE 3/4IN. 5PC SET

    T/TOOL INSERT TYPE 3/4IN. 5PC SET

    Now: CAD $54.99
    Was: $65.00
    Tool Holder 5pc Set - Carbide Insert Type Style: 3/4" Contains: Turning L & R Facing: L & R and Threading Extra Inserts Available Model B2138 and B2138T (Titanium Coated, Sold in a set of 3)
    B2124
    Now: CAD $54.99
    Was: $65.00
    Add to Cart
  • END MILL 10PC SET TIN COATED 4FLT

    END MILL 10PC SET TIN COATED 4FLT

    Now: CAD $109.00
    Was: $129.99
    10pc Set End Mills Titanium Nitride Coated - H.S.S. - 4 flutes Size: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16". & 3/4" Includes: Wood Case
    B2158
    Now: CAD $109.00
    Was: $129.99
    Add to Cart
  • COLLET 3/4IN. R8

    COLLET 3/4IN. R8

    Now: CAD $8.99
    Was: $10.99
    B152 3/4" R8 Collet Highest grade steel Precision ground Hole sizes: 3/4"
    B152
    Now: CAD $8.99
    Was: $10.99
  • ARBOR MT2/J3

    ARBOR MT2/J3

    Now: CAD $5.99
    Was: $7.99
    Drill Chuck Arbors Precision hardened and ground Tool Steel Taper: MT2-JT3
    B107
    Now: CAD $5.99
    Was: $7.99
    Add to Cart
  • COLLET 1/4IN. R8

    COLLET 1/4IN. R8

    Now: CAD $8.99
    Was: $10.99
    B144 1/4" R8 Collet Highest grade steel Precision ground Hole sizes: 1/4"
    B144
    Now: CAD $8.99
    Was: $10.99
    Add to Cart
  • ARBOR PRESS 3 TON

    ARBOR PRESS 3 TON B093

    Now: CAD $349.00
    Was: $425.00
    Arbor Press - 3 Ton, 6" Throat, 12" Max Height Heavy teeth 4-position anvil Heavy cast iron body Steel rams and pinions Gross weight: 69kg. Carton size: 9" x 19" x 24"
    B093
    Now: CAD $349.00
    Was: $425.00
    Add to Cart
  • KNURLING TOOL 6 HEAD 5/16IN. X3/4IN. X5IN.

    KNURLING TOOL 6 HEAD 5/16IN. X3/4IN. X5IN.

    CAD $51.99
    B3008 5/16" x 3/4" Shank, 6 Head Knurling Tool Holder This knurling tool holder features robust construction with six hardened and precision ground wheels; fine, medium and coarse knurls for forming diamond patterns. It also has a lock knob, used to...
    B3008
    CAD $51.99
    Add to Cart
  • ROTARY TABLE 3IN. HORIZONTAL AND VERTICAL

    ROTARY TABLE 3IN. HORIZONTAL AND VERTICAL

    Now: CAD $105.00
    Was: $149.00
    3" Rotary Table Horizontal/Vertical This low profile rotary table is precision made with fully ground finish can be used horizontally or vertically. The table rotates 360 with a 1:36 ratio or 10 per hand wheel revolution.
    B2686
    Now: CAD $105.00
    Was: $149.00
    Add to Cart
  • MOTOR ARBORS 5/8IN.

    MOTOR ARBORS 5/8IN.

    CAD $10.99
    Motor Work Arbors Made in U.S.A. Made to fit «" and 5/8" motor shafts to hold grinding and buffing wheels and wire brushes Accurately machined Size: 1/2" - 20 thread for 5/8" shafts
    B93458
    CAD $10.99
    Add to Cart
  • COLLET MT3 3/8IN.

    COLLET MT3 3/8IN.

    Now: CAD $16.99
    Was: $20.99
    MT3 Collet Hardened and ground Fits 3/8" x 16 TPI drawbar Size: 3/8"
    B360038
    Now: CAD $16.99
    Was: $20.99
    Add to Cart
  • TUBE CENTRE MT3

    TUBE CENTRE MT3

    Now: CAD $97.99
    Was: $129.00
    Tubing Center This well constructed tubing center is ideal for hollow work pieces like pipes & tubing. With sealed ball bearing you don't have to worry about dust getting in. MT3 Large Diameter: 3" Small Diameter: 3/4"
    B2829
    Now: CAD $97.99
    Was: $129.00
    Add to Cart
  • PARTING TOOL WITH BLADE 1/2IN.

    PARTING TOOL WITH BLADE 1/2IN.

    Now: CAD $22.99
    Was: $27.99
    Parting Tool w/1/2" Blade This two piece holder will give superb holding power. Comes with a 1/2" HSS blade. Holder size:1/2" x 3/4'x 2 3/16 Blade size: 3/32" x 1/2" x 4"
    B2718
    Now: CAD $22.99
    Was: $27.99
    Add to Cart
  • KEY TORK T 15

    KEY TORK T 15

    CAD $2.99
    T-15 Torx Key This Torx Key is manufactured from SNCM steel hardened and tempered with chemically blacked finish for corrosion protection.
    B2895K
    CAD $2.99
    Add to Cart
  • STUB ARBOR MT 2 X 1IN.

    Groz

    STUB ARBOR MT 2 X 1IN.

    Now: CAD $11.49
    Was: $14.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B460
    Now: CAD $11.49
    Was: $14.99
    Add to Cart
  • CUT OFF BLADE 1/8IN. X 3/4IN.

    Groz

    CUT OFF BLADE 1/8IN. X 3/4IN.

    Now: CAD $25.99
    Was: $36.99
    B417034 Parting Off Blade 1/8" x 3/4" Sold in complete sets of 4 holders. These tool holders come with all necessary socket keys and wrenches. They are superbly crafted and are recommended for lathes of 12" to 18" swing and are usually used in...
    B417034
    Now: CAD $25.99
    Was: $36.99
    Add to Cart
  • TOOL BIT CARBIDE BR8 C6

    TOOL BIT CARBIDE BR8 C6

    Now: CAD $3.49
    Was: $4.99
    Square Carbide Tipped Brazed Tool Bits Grade 5 for Steel 1/4" - 1/2" long approx. 5/16" - 2 1/4" long approx. 3/8" - 2 1/2" long approx. 1/2" - 3 1/2" long approx. Style B Right Hand Size: 1/2"
    B640C6
    Now: CAD $3.49
    Was: $4.99
    Pre-Order Now
  • TOOL BIT CARBIDE D5 C6

    TOOL BIT CARBIDE D5 C6

    Now: CAD $1.99
    Was: $2.99
    Square Carbide Tipped Brazed Tool Bits Grade 5 for Steel 1/4" - 1/2" long approx. 5/16" - 2 1/4" long approx. 3/8" - 2 1/2" long approx. 1/2" - 3 1/2" long approx. Style D Size: 5/16"
    B648C6
    Now: CAD $1.99
    Was: $2.99
    Pre-Order Now
  • STAND FOR MILLING MACHINE CX600

    Craftex CX Series

    STAND FOR MILLING MACHINE CX600 CX600ST

    Now: CAD $255.00
    Was: $299.00
    CX600ST  Optional Stand for CX600 Mill / Drill - Craftex CX-Series  Featuring heavy gauge welded steel construction this optional stand is designed for CX600 Mill / Drill. The stand is 14-3/4" in length and features a storage cabinet with a shelf and a...
    CX600ST
    Now: CAD $255.00
    Was: $299.00
    Add to Cart
  • END MILL HOLDER 1/2IN. R8

    END MILL HOLDER 1/2IN. R8

    CAD $23.99
    R8 End Mill Holders - 1/2" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B156
    CAD $23.99
    Add to Cart
  • FLY CUTTER 1/2IN. SET

    FLY CUTTER 1/2IN. SET

    Now: CAD $21.99
    Was: $25.99
    Fly Cutter Set Top Quality Counter balanced Made of hardened steel Uses standard tool-bits Shank Dia.: 1/2" Includes Head Dia.: 3/4", 1 1/8", 1 1/2" Standard Tool Bit Size: 3/16", 1/4", 5/16"
    B090
    Now: CAD $21.99
    Was: $25.99
    Add to Cart
  • TOOL HOLDER LH OFFSET

    Groz

    TOOL HOLDER LH OFFSET

    CAD $25.99
    Lathe Turning Tool Holder This turning tool holder is made out of drop forged steel and is accurately machined and heat-treated. Comes complete with wrench. For High Speed Steel Tool Bits Type: Left Hand Holder Size: 3/8" x 7/8" x 5" Tool Bit Size:...
    H140015
    CAD $25.99
    Add to Cart
  • INDEXABLE BORING BAR W/4 INSERT S12M

    INDEXABLE BORING BAR W/4 INSERT S12M

    Now: CAD $69.99
    Was: $89.99
    B3001 12mm Right Hand Indexable Boring Bar with 4 Insert Shanks The geometry of the boring bar is designed in such way that it allows straight boring to a shoulder, as well as internal facing cuts. This boring bar uses CCMT insert and is a very...
    B3001
    Now: CAD $69.99
    Was: $89.99
    Add to Cart
  • Craftex CX Series

    LATHE MINI 7IN. X12IN. 1/2HP CX SERIES CSA CX704

    Now: CAD $899.00
    Was: $1,299.00
    CX704 7" x 12" Mini Metal Lathe - Craftex CX-Series This mini metal lathe has the features and precision of the larger lathes and is an awesome machine for hobby machinists. The variable speed switch allows user to select the correct speed required for...
    CX704
    Now: CAD $899.00
    Was: $1,299.00
    Add to Cart
  • END MILL 2IN. WITH 3 CARBIDE INSERTS R8

    END MILL 2IN. WITH 3 CARBIDE INSERTS R8

    Now: CAD $89.99
    Was: $109.00
    End Mill with Carbide Insert - R8 Arbor This 2" end mill comes with 3 carbide inserts. It is excellent for facing off excessive material quickly, leaving a smooth and even finish. A Must for Any Machine Shop|
    B2136R8
    Now: CAD $89.99
    Was: $109.00
    Add to Cart
  • E.M. HOLDER MT 3 1/2

    E.M. HOLDER MT 3 1/2

    CAD $33.99
    Morse Taper End Mill Holder - Taper: 3, size «" For Weldon Shank End mills Precision ground and hardened to 50 RC concentric with .0006" All morse taper holders are threaded for 3/8" - 16 Drawbar
    415435
    CAD $33.99
    Add to Cart
  • BORING BAR SET 3/8

    BORING BAR SET 3/8IN.

    Now: CAD $19.99
    Was: $25.99
    9pc Precision Boring Bar Set Precision ground shanks Three lengths for each mini bore size High quality alloy steel for greater rigidity Carbide tip ground square with shank for flat bottom boring Offset taper to provide greater rigidity at cutting point...
    B080
    Now: CAD $19.99
    Was: $25.99
    Add to Cart
  • ADJUSTABLE KNURLING TOOL HOLDER

    ADJUSTABLE KNURLING TOOL HOLDER

    CAD $39.99
    B3005 Adjustable Knurling Tool Holder This knurling tool holder features precision ground wheels with medium knurls, used for performing perfect knurl patterns. The knurling tool is adjustable and can be used for any size work-piece. Shank Size: 3/8"...
    B3005
    CAD $39.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley