Kreg Tools

This 2-1/2-inch coarse thread, #2 square drive washer-head screw works well in 1-1/2-inch-thick material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket...

DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems - KREG 3-Inch and 6-Inch Driver Set gives you choices. The Deep 2 Driver recess resists cam-out and comes in the 3-inch and 6-inch length set. The 3-inch...

This 1" coarse thread, #2 square drive washer head screw works well in 1/2" thick, softer material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This...

Kreg Zinc Screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection Available in a variety of sizes, thread options, head styles, and quantities...

All Kreg screws feature a deep #2 square drive, a needle-point self-tapping tip, and a case-hardened design built for strength. Our Zinc Screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws...

This 2-1/2-inch coarse thread, #2 square drive washer-head screw works well in 1-1/2-inch thick material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket...

PPNT 50CT Solid Wood Pocket Hole Plugs Paint Grade - KREG Hide or Decoratively Accent Exposed Pocket Holes Hide or decoratively accent exposed pocket holes Highly-quality, trimmable, solid-wood plugs For use with 1/2"- to 1-1/2"-thick...

KREG PINE PLUGS - 50pcs Conceal your pocket holes with these KREG pocket hole plugs. For those times when Pocket-Holes won't be hidden on the backside of your project or you want to highlight them decoratively, the plugs are ideal.

KKS1070 Bench Dogs – KREG These simple 3/4" reinforced bench dogs included several features to help make your next project easier. KKS1070 features square clamping Pads for solid and secure hold and the Bench Brakes for non-slip work surface. The...

ACS735 Restore clean, splinter-free cuts to the Kreg Plunge Saw The Splinter Guard mounts in the Plunge Saw shroud and fits tight against the blade on the side not touching the Guide Track. This ensures splinter-free cuts on both sides of the blade...

Multi Mark - KREG This multi-purpose marking and measuring tool covers a wide variety of household and jobsite applications. This tool works as: 3-Way Adjustable Rule, Imperial and Metric Scale, Compact Design, Layout Tool, Trimming Tool, T-Square,...

The Easy-Set Pocket-Hole Drill Bit is the same 3/8"-diameter stepped bit that comes with Kreg® 300-Series Pocket-Hole Jigs. If you have a worn bit, or if you want to add another bit to your pocket-hole tool collection, this is the perfect choice...

Add a second bit to your Kreg® 300-Series Pocket-Hole Jig, or update any Kreg Jig to make building wood projects with boards and plywood even easier. The Kreg® Easy-Set Pocket-Hole Drill Bit with Step Collar and Gauge/Wrench is the same stepped...

KHIBIT 35mm Concealed Hinge Jig Bit - KREG Bore Clean, Perfect Holes for Concealed Door Hinges The 35mm Concealed Hinge Bit makes it possible to bore clean, perfect holes for concealed hinges. The bit is a direct replacement for the bit that's...

This 2" coarse thread, #2 square drive washer head screw works well in softer material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is...

Kreg Multipurpose Project Blocks are the perfect way to support, hold, and work on projects anywhere. These incredibly versatile blocks elevate your material to sit 1 1/2" above the work surface for convenient sanding, finishing, routing, and much more...

SK04 KREG POCKET HOLE SCREW STARTER KIT Description The Kreg Pocket-Hole Screw Starter Kit provides a right-sized, right-priced assortment of the Kreg Screws for Kreg Joinery projects. The Pocket-Hole Screw Starter kit contains 260 Kreg Screws in six...

This 1" coarse thread, #2 square drive pan head screw works well in 1/2" thick, softer materials such as plywoods and composites. The deep recess, pan head of this screw provides excellent driver engagement and is popular in building drawer boxes from...

1-1/4'' Coarse Thread self-tapping screws are specially designed for pocket hole joinery. They feature a self-tapping auger point that eliminates pre-drilling and a flat head that seats flushly in the bottom of the pocket hole. All of our screws utilize...

SMLC2X250125 2-1/2", 125/pk No.4 Coarse Pocket Screw - KREG Large 2-1/2" long #14 hardened-steel screws for 1-1/2" and thicker material Massive flat surface under head provides superior holding power Self-tapping thread design does not require second...

This 1 1/4" fine thread, #2 square drive pan head screw works well in 1/2" thick, hardwood material such as oak, maple, hickory, cherry and walnut. The deep recess, pan head of this screw provides excellent driver engagement and is popular in framing...

This 2-1/2" coarse thread, #2 square drive washer head screw works well in 1-1/2" thick material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is...

The Kreg® Pocket-Hole Jig 310 makes it easier than ever to build wood projectswhether you're building your first DIY project, or you've been working with wood for years. The Pocket-Hole Jig 310 uses a simple, easy-to-understand setup process that...

The Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws has various applications like repairing, making it a handy tool to own among your other hand and power tools. With its compact size, you will be able to fit it in tight spaces and...

This 1-1/2" coarse thread, #2 square drive washer head screw works well in 1" thick, softer material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket...

Confidently carry full-size sheets with the Kreg Panel Carrier. It makes the tough task of carrying plywood and large panels as easy as clamp, lift, and go! Now you can move 4x8 sheets by yourself without added strain or risk of damaging the material...

3-1/4" Throat Face Clamp - KREG This unique clamp is designed specially for pocket-screw joinery. It helps to ensure a perfectly flush joint every time. Without clamping the joint can misalign if the screw follows the grain of the wood. To use, place...

Crown Pro - KREG This uniquely designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts. The Crown Pro eliminates coping of joints and no compound cut is required. The curved design on Crown Pro is...

Pocket Hole Screw Kit, in 5-Sizes - KREG This screw kit is consist of 5 popular screw sizes for pocket hole joinery. Use 1" screw in 1/2" thick stock, a 1-1/4" screw in 3/4" stock and a 2-1/2" screw in 1-1/2" stock. The screws feature needle-point self...

With a simple and intuitive design, the Kreg Magnetic Stud Finder with LASER-MARK™ is a pocket-friendly way to hit the mark every time. Featuring strong rare earth magnets, the Magnetic Stud Finder with LASER-MARK™ offers reliable...

ACS440 Add more workpiece support to the Adaptive Cutting System Project Table for full sheets of plywood or long boards with the Project Table Extension Brackets. These brackets mount in the aluminum perimeter frame of the Project Table and accept 2x4...

KREG Feather Board Twin Pack The True-FLEXO Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in...

KHIPULL Cabinet Hardware Jig - KREG Install Knobs and Pulls the Worry-Free Way - with Easy, Repeatable Accuracy Adjustable guides for accurate hole placement Built-in measuring scales for repeatable results  Versatile for mounting single and...

KHIHINGE Concealed Hinge Jig - KREG Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly Make cabinet door installation easy! Get drill press accuracy with any hand drill. Accurate hinge positioning...

KHISLIDE Drawer Slide Jig - KREG Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly Accurate slide positioning with built-in indexing tabs Repeatable results without measuring and marking Versatile for...

Get an extra helping hand for installing cabinet doors with the Kreg Cabinet Door Mounting Jig. It makes the job of installing cabinet doors a breeze – whether you’re working with face frames or frameless cabinets. It works with both...

KHC3 3" Wood Project Clamp - KREG Quick, Convenient Clamping with Automatic Adjustment 3" reach; clamps materials up to 3" thick (76mm)  Adjusts automatically to match material thickness Easy-to-regulate pressure with a simple...

The Complete Pocket-Hole Kit for Building DIY Wood Projects The Kreg® Pocket-Hole Jig 320 makes it easier than ever to build wood projects whether you're building your first DIY project, or you've been working with wood for years. The Pocket-Hole...

Add perfectly spaced shelf pin holes to your projects with the Kreg Shelf Pin Jig. Hardened-steel drill guides ensure precision for level, wobble-free shelves. It comes complete with a 1/4" (6mm) high-quality brad-point bit. Drill guides are centered on...

Add perfectly spaced shelf pin holes to your projects with the Kreg Shelf Pin Jig. Hardened-steel drill guides ensure precision for level, wobble-free shelves. It comes complete with a 5mm high-quality brad-point bit. Drill guides are centered on...

KHCRA Right Angle Clamp - KREG Holds pocket-hole joints at 90° during project assembly Automaxx® technology adjusts automatically to material thickness Contoured grips for added comfort Pin fits securely into pocket-hole Swivel pad holds...

KHC6 6" Wood Project Clamp - KREG 6" reach (152mm); clamps materials up to 5" thick (127mm) Adjusts automatically to match material thickness Easy-to-regulate pressure with a simple thumbscrew Large clamp faces spread pressure evenly Ergonomic...

ACS445 Connect two 62" Adaptive Cutting System Guide Tracks together for extended cutting capacity up to 112". These steel connectors lock the tracks securely together using a two-piece design that prevents marring the aluminum tracks. Designed for...

ACS705 High-performance blade for the Kreg Plunge Saw Keep an extra blade on hand with this high-performance, 48-tooth, carbide tipped bladethe same one that's included with the Adaptive Cutting System Plunge Saw. The laser-cut body ensures flatness,...

KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.

KBC3 3" Automaxx Bench Clamp - KREG TOOLS Benchtop clamps for Kreg Joinery™, project assembly, routing, cutting, sanding, drilling, and more Extra-large padded clamp face evenly distributes clamping force Work with Kreg Clamp Table, Clamp...

Create pocket holes with twice the strength using the Kreg Pocket-Hole Jig XL. This extra-large jig makes it easy to build big and build strong using 2x4 or 4x4 boards, paired with the impressive holding power of XL Pocket-Hole Screws. The Pocket-Hole...

Create a versatile, movable benchtop clamping station Includes 3" (76mm) Bench Clamp and Bench Clamp Base with bolt and knob Automaxx auto-adjust technology adjusts the clamp automatically to match material thickness Clamps materials up to 31/2"...

PRS4038 Precision Router Table Insert Plate - Undrilled Solid, Flat, and Perfectly Level Mounting Surface  This rugged 3/8" thick (9mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your...

ACS405 The fast, easy way to precisely make straight, narrow cuts in plywood and solid wood...anywhere Rip Guides attach quickly and easily to the Adaptive Cutting System 62" Guide Track to provide accurate measurement and material stops when making...

KMA2700 Accu-Cut - KREG Straight, accurate, splinter-free cuts made easy Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels Simply align the Guide Track with your marks to make accurate cuts Hold track in place without...

KMA2750 Get expanded versatility from your circular saw and Accu-Cut Double the cutting capacity of your Accu-Cut with the Accu-Cut Expansion Pack. It connects easily to your Accu-Cut to deliver the same straight, accurate, splinter-free performance...

ACS430 High-performance track for straight, splinter-free cuts with the Kreg® Plunge Saw Make straight, splinter-free by guiding the Plunge Saw on the Adaptive Cutting System 62" Guide Track. This precision aluminum track features an anti-chip...

KREG PRECISION BAND SAW FENCE The KREG fence is designed to produce an unprecedented level of rigidity, adjustability, and precision. The fence is adjustable in two dimensions for ease in setting it parallel to the blade. Cutting accuracy and...

KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw...

ACS745 Replace a worn or damaged table surface on the Project Table without buying a complete new top. The MDF Replacement Top is machined to the same precision as the original. This includes the mounting hardware. Features: 3/4" MDF replacement top...

KMA3700 Transform your circular saw into a high-performance track-guided cutting tool for breaking down full sheets of plywood Set your projects up for success by making straight, accurate, splinter-free cuts with the Accu-Cut XL Circular Saw Track...

ACSTBASE Folding, rolling base for the Adaptive Cutting System Project Table The Project Table Base offers solid support for the Adaptive Cutting System Project Table Top to create a rock-solid cutting center. The base also folds when not in use to...

PRS2100 Precision Benchtop Router Table - KREG Rugged Steel Stand with Vibration Dampening Rubber Feet Professionally Edge banded Reinforced MDF Top (16" x 24") Tabletop Height of 16" Impact Resistant Easy-Slide™ Micro-Dot Skin Full-Size Router Insert...

The Adaptive Cutting System Plunge-Cut Track Saw is engineered for exceptional cutting performance, offering precision when cutting plywood and solid-wood boards. Paired with the industry's longest standard track, the 62" Guide Track, this track saw...

PRS5000 Precision Router Lift - KREG Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router...

ACS2000 Discover the advantages of guided cutting with the Adaptive Cutting System Saw + Guide Track Kit. This kit includes the Adaptive Cutting System Plunge Saw and the 62" Guide Track to provide everything needed to make straight, accurate, smooth,...