Power Tools

Power Tools

  • DeWalt

    HEDGE TRIMMER 22IN. 20V TOOL ONLY DEWALT

    CAD $159.00
    DCHT820B 20V MAX* LITHIUM ION 22" HEDGE TRIMMER (BARE Tool) The 22" Hedge Trimmer has a high output motor and laser cut, hooked tooth blades engineered for clean, fast cuts on branches up to 3/4 of an inch thick. If obstacles are hit during cutting,...
    DCHT820B
    CAD $159.00
    Add to Cart
  • Makita

    SAW BLADE CIRCULAR CT 6 1/2IN. 24T MAKITA

    Now: CAD $14.99
    Was: $16.99
    T01404 6.5" Framing Carbide-Tipped Saw Blade - MAKITA Ultra-Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss Carbide tooth construction for clean cuts and long life Fully hardened and...
    T01404
    Now: CAD $14.99
    Was: $16.99
    Add to Cart
  • Makita

    SAW BLADE CIRCULAR CT 6 1/2IN. 40T MAKITA

    Now: CAD $13.99
    Was: $19.99
    T01410 6.5", 40 Teeth Fine Crosscutting Carbide-Tipped Saw Blade - MAKITA Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss Carbide tooth construction for clean cuts and long life Fully...
    T01410
    Now: CAD $13.99
    Was: $19.99
    Add to Cart
  • Makita

    MAKITA 8 1/2IN. SLIDING COMPOUND MITRE SAW

    CAD $389.00
    LS0815FL   8-1/2" Sliding Compound Mitre Saw with Laser and LED Light - MAKITA High Cutting Capacity And Dust Extraction Rate Up To 12" Cuts In 2x Material Offers High Cutting Capacity With Reduced Weight And Size Electric brake for increased...
    LS0815FL
    CAD $389.00
  • Makita

    HEDGE TRIMMER TOOL ONLY 18V LXT MAKITA DUH523Z

    CAD $159.00
    DUH523Z 18V Mobile Hedge Trimmer 520mm - MAKITA Blade length 520mm Two handed safety switching Continuous run time on a single battery charge approximately 70 minutes (no load) Soft grip Low vibration Battery capacity warning lamp: Blinking...
    DUH523Z
    CAD $159.00
    Add to Cart
  • Makita

    MAKITA 41PC DRIVER AND DRILL SET

    Now: CAD $24.88
    Was: $29.99
    T03040 41 Pc Driver & Drill Bit Kit - MAKITA 1x 2-1/4" Magnetic Bit Holder 3x Magnetic Nut Drivers - 1/4", 5/16", 3/8" 4x HSS-BP Drill Bits - 1/16", 1/8", 3/16", 1/4"  3x 3-1/2" Driver Bits - SQ1, SQ2,...
    T03040
    Now: CAD $24.88
    Was: $29.99
    Add to Cart
  • DeWalt

    DEWALT 1.6HP 200 PSI 15GAL. COMPRESSOR

    CAD $499.00
    D55168 1.6 Hp Continuous, 200 Psi, 15 Gallon Workshop Compressor - DEWALT 5.0 SCFM @ 90 PSI allows for quick compressor recovery times 200 PSI max tank storage pressure allows for longer air tool run times 78 dBA (tested per ISO3744) operational...
    D55168
    CAD $499.00
    Add to Cart
  • DeWalt

    DEWALT 6 GAL. 165 PSI PANCAKE COMPRESSOR

    CAD $199.00
    DWFP55126 Heavy Duty 165 Psi Pancake Compressor - DEWALT 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump, enable long tool run time with quick recovery High efficiency motor for easy start up in cold weather or extension...
    DWFP55126
    CAD $199.00
    Add to Cart
  • Makita

    MAKITA CORDLESS JIGSAW W.BRUSHLESS MOTOR

    Now: CAD $235.00
    Was: $239.00
    DJV182Z Cordless Jig Saw with Brushless Motor - MAKITA Tool-Less Blade Change, Soft Start, Soft No-Load, Variable Speed Brushless Motor Offers Same Operability as AC Models D-Handle Style Brushless DC motor with high power to weight ratio Brushless...
    DJV182Z
    Now: CAD $235.00
    Was: $239.00
    Add to Cart
  • Makita

    MAKITA 18 IN 1 SCREWDRIVER B40571

    Now: CAD $10.99
    Was: $11.99
    B405716 18 in 1 Screwdriver - MAKITA Compact design ideal for use in restricted areas 1/4" one touch quick release chuck can be removed for use in standard 3/8" or 1/2" drill chucks Bits store conveniently inside handle for quick and easy...
    B40571
    Now: CAD $10.99
    Was: $11.99
    Add to Cart
  • Makita

    MAKITA 4 1/2IN. CORDLESS ANGLE GRINDER KIT

    CAD $159.00
    DGA454Z 4-1/2" Cordless Angle Grinder with Brushless Motor - MAKITA High Performance And Efficiency For Heavy-Duty Grinding Applications Automatic torque Drive Technology (ADT) feature adjusts the torque and speed according to the load condition,...
    DGA454Z
    CAD $159.00
    Add to Cart
  • DeWalt

    DEWALT 20V 5AMP LITHIUM ION BATTERY 2PCK

    CAD $159.00
    DCB2052 2/pk 20V Max. Premium XR 5.0Ah Lithium Ion - Dewalt The DCB205-2 20V MAX* Premium XR 5.0Ah Lithium Ion Battery Pack provides immediate feedback on state of charge with the 3-LED Fuel Gauge System and has a lightweight design for easy...
    DCB2052
    CAD $159.00
  • DeWalt

    18V TO 20V ADAPTOR

    CAD $49.00
    DCA1820 Battery Adapter for 18V Tools, 20V - DEWALT Compatible with most DEWALT 18V tools and allows for use of 20V MAX compact batteries Requires use of DEWALT 20V MAX charger Use with DCB201, DCB203, DCB203BT compact batteries
    DCA1820
    CAD $49.00
  • Makita

    MAKITA 1 1/4 HP COMPACT ROUTER

    Now: CAD $125.00
    Was: $129.00
    RT0701C 1-1/4 HP Compact Router - MAKITA The Makita 1-1/4 HP Compact Router (model RT0701C) delivers performance and precision in a compact design. With a full 1-1/4 maximum horsepower, the RT0701C is engineered for a range of precision routing...
    RT0701C
    Now: CAD $125.00
    Was: $129.00
  • Makita

    18V LXT BL6 1/2IN. CIRCULAR SAW TOOL ONLY

    Now: CAD $199.00
    Was: $205.00
    DHS680Z 18V Mobile Brushless Circular Saw 165mm - MAKITA Powerful BrushlessDC motor (BLDC) Automatic Torque Drive; automatically increases motor torque according to load conditions Magnesium base with 45 and 50 degrees bevel cutting capacity Compact...
    DHS680Z
    Now: CAD $199.00
    Was: $205.00
    Add to Cart
  • Makita

    MAKITA 18 GA 1/4IN. NARROW CROWN STAPLER

    Now: CAD $128.99
    Was: $149.00
    AT638A 14" Narrow Crown Stapler, 18 Gauge - MAKITA The Makita 1/4" Narrow Crown Stapler (model AT638A) combines ease-of-use and powerful performance in a compact size. The AT638A has a bottom-loading magazine that accepts 18 ga. staples sized 1/2" to...
    AT638A
    Now: CAD $128.99
    Was: $149.00
    Add to Cart
  • Makita

    MAKITA 23 GA 1 3/8IN. PIN NAILER

    CAD $125.00
    AF353 23 Gauge, 1‑3/8" Pin Nailer - MAKITA FEATURES Powerful motor drives standard headless pins sized 5/8", 11/16", 3/4", 1", 1-3/16" and 1-3/8" Aluminum body, magazine and cylinder for strength and durability; weighs only 2 lbs. Nail lock-out...
    AF353
    CAD $125.00
    Pre-Order Now
  • DeWalt

    ORBITAL FINISH SANDER 1/4 SHEET DEWALT

    CAD $69.00
    DWE6411 1/4" Sheet Palm Grip Sander - DEWALT The DWE6411 1/4" Sheet Palm Sander has a 2.3 amp motor that delivers 14,000 OPM. The separate counterweight reduces vibration and along with the rubber overmold grip provides comfortable sanding. A shorter...
    DWE6411
    CAD $69.00
    Add to Cart
  • Kreg

    KREG PRECISION ROUTER TABLE INSERT PLATE

    Now: CAD $79.99
    Was: $88.99
    PRS4038 Precision Router Table Insert Plate - Undrilled Solid, Flat, and Perfectly Level Mounting Surface  This rugged 3/8" thick (9mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your...
    PRS4038
    Now: CAD $79.99
    Was: $88.99
    Add to Cart
  • Makita

    18V LI ION BATTERY MAKITA 4.0 AH

    CAD $109.00
    BL1840B 18V LXT Lithium-Ion 4.0Ah Battery - MAKITA EFFICIENCY : Integrated L.E.D. battery charge level indicator allows user to monitor battery charge INNOVATION : Reaches full charge in 40 minutes or less PERFORMANCE : Provides up to...
    BL1840B
    CAD $109.00
  • Makita

    DRYWALL CUTOUT TOOL 18V LXT

    CAD $109.00
    DCO180Z Cordless Drywall Cutout Tool - MAKITA Lightweight Design With High RPM's For Fast Drywall Cutting Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall...
    DCO180Z
    CAD $109.00
    Add to Cart
  • DeWalt

    12IN. RIGHT ANGLE FLEX SHAFT

    CAD $32.99
    DWARAFS 12" Right Angle Flex Shaft - DeWalt Rapid load quick bit changes Fasteners supported by magnet for 100% alignment True 90 degree right angle head for versatility Flexible shaft reaches nearly any space Side handle for additional leverage...
    DWARAFS
    CAD $32.99
    Add to Cart
  • DeWalt

    20V MITER SAW

    CAD $499.00
    DCS361M1 20V MAX 7 1/4" Sliding Miter Saw (w/Battery & Charger) Utilizes 20V Max* Batttery Pack (DCB204) which provides on Average, 183 cuts of 2x4 Pine or 275 cuts of 3-1/4 Pine Baseboard Integrated XPS cross cut system provides adjustment free cut...
    DCS361M1
    CAD $499.00
    Add to Cart
  • DeWalt

    5IN. RANDOM ORBIT SANDER SINGLE SPEED

    CAD $89.00
    DWE6421 5" Random Orbit Sander / Single Speed / H & L pad 3.0 Amp motor that spins the pad at 12,000 OPM Shorter height allows the user to get closer to work piece Rubber over-mold in all of the critically areas of the sander Separate counterweight...
    DWE6421
    CAD $89.00
    Add to Cart
  • Makita

    MAKITA 18V 5.0AH LI ION LXT BATTERY

    Now: CAD $127.99
    Was: $129.00
    BL1850B 18V 5.0Ah Lithium-Ion Battery - MAKITA 18V Lithium-Ion battery 5.0Ah With battery charge level indicator Voltage: 18V Capacity: 5.0Ah Compatible Charger: DC18RA- Charge time45min Compatible Charger: DC18RC- Charge time45min Compatible...
    BL1850B
    Now: CAD $127.99
    Was: $129.00
    Add to Cart
  • DELUXE FEATHER BOARD WITH T SLOT HOLDER

    Now: CAD $12.99
    Was: $15.99
    B3260 Retrofit Featherboard Kit with T-slot Holder Featuring two T-slot locking nuts with knobs, this high quality retrofit feather kit quickly attaches to your working surfaces and stays put when the knobs are tightened. Great for router tables,...
    B3260
    Now: CAD $12.99
    Was: $15.99
    Add to Cart
  • CRAFTEX MITER SAW STAND 300LBS CAPACITY CT192

    Now: CAD $49.99
    Was: $105.00
    CT192 Miter Saw Stand Tough powder coat finish Comfortable work height Fast and easy snap pin set-up Fold-up convenience  Fits all mitre saws from 8" to 10" non-slide compound SPECIFICATION: Extension length: from 36" to 64" Top Dimension: 34" x...
    CT192
    Now: CAD $49.99
    Was: $105.00
    Add to Cart
  • FEATHER BOARD SAFETY 5 PC SET

    Now: CAD $16.99
    Was: $23.99
    B3276 5pc Featherboard Safety Set The 5-piece shop safety kit allows you to keep your hands safe from table saw, router table, shaper table and jointer while operation. INCLUDES two push stick one push block one notch stick one featherboard
    B3276
    Now: CAD $16.99
    Was: $23.99
    Add to Cart
  • Bosch

    BOSCH 3 1/2IN. X1/8IN. DIAMOND GRIT SEG BLADE

    Now: CAD $34.00
    Was: $66.99
    OSC312DG 3-1/2" x 1/8" kerf Multi-Tool Diamond Grit Grout Grinding Blade Segmented diamond grit grinding blade Design features a 1/8 In. kerf for efficient material removal High-quality diamond grit delivers great performance in cutting abrasive...
    OSC312DG
    Now: CAD $34.00
    Was: $66.99
    Add to Cart
  • Bosch

    BOSCH 3IN. CARBIDE GRIT DELTA RASP OSC3DRF

    Now: CAD $25.00
    Was: $49.99
    OSC3DRF 3" Kerf Multi-Tool Carbide/Grit Delta Rasp Grinding Blade - BOSCH Delta carbide grit For use on thinset, paint and other materials Removal is quick and easy Three-inch surface area Direct attachment to Multi-X tool Award-winning pro interface:...
    OSC3DRF
    Now: CAD $25.00
    Was: $49.99
    Add to Cart
  • DeWalt

    DEWALT 20V MAX XR OSCILLATING MULTITOOL

    CAD $129.00
    DCS355B 20V Max XR Oscillating Multi Tool (Tool Only) DEWALT Brushless Motor delivers up to 57% more run time over brushed QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without wrenches. DUAL-GRIP Variable Speed...
    DCS355B
    CAD $129.00
    Add to Cart
  • Makita

    MAKITA18V LI ION DUAL PORT RAPID OPTIMUM

    CAD $109.00
    DC18RD Same Time Dual Port Rapid Charger - MAKITA Fast charging - charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes Built-in CPU - gathers information from the battery's memory chip to determine optimum charging...
    DC18RD
    CAD $109.00
    Add to Cart
  • DeWalt

    DEWALT 20V 5AMP LITHIUM ION BATTERY 1PC

    CAD $109.00
    DCB205 20V MAX Premium XR 5.0 Ah Lithium Ion Battery Pack - DEWALT Premium XR Lithium Ion pack provides up to 60% more capacity than standard 20V MAX* battery pack (DCB200) 3-LED Fuel Gauge allows immediate feedback on state of charge No Memory and...
    DCB205
    CAD $109.00
  • Makita

    GRINDER 4 1/2IN. ANGLE GRINDER W.CARRYCASE

    CAD $79.00
    GA4530K 4-1/2" Angle Grinder - MAKITA Labyrinth construction seals motor and bearings from contamination Zig-Zag varnish on armature and powder coating on field to protect motor from abrasion Engineered for durability  double protection against dust,...
    GA4530K
    CAD $79.00
    Pre-Order Now
  • DeWalt

    TABLE SAW 10IN. COMPACT W/ GUARDING SYSTEM

    CAD $449.00
    DWE7480 10" Compact Job Site Table Saw with Site-Pro Modular Guarding System - DEWALT Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate 24" of rip capacity, easily cuts a variety of larger shelving and trim...
    DWE7480
    CAD $449.00
    Add to Cart
  • Makita

    PLANER 3 1/4IN. 18V LXT TOOL ONLY MAKITA DKP180Z

    CAD $149.00
    DKP180Z 82mm 18V Mobile Planer - Makita Foot on base protects work piece and blades from scratches and damages V-groove on base for easy chamfer cutting Enhanced chip ejection thanks to improved fan design that produces larger exhaust...
    DKP180Z
    CAD $149.00
    Add to Cart
  • DeWalt

    BATTERY 20V MAX LI ION DEWALT

    CAD $99.00
    DCB204 20V MAX* Premium XR Lithium Ion Battery Pack - DEWALT Premium XR Lithium Ion pack provides up to 33% more capacity than standard 20V MAX* battery packs 3-LED Fuel Gauge System allows immediate feedback on state of charge No memory and virtually...
    DCB204
    CAD $99.00
    Add to Cart
  • Makita

    BRAD NAILER 2IN. NEW MAKITA

    CAD $115.00
    AF505N 2" Brad Nailer - MAKITA Features Slim Contact Tip Design For Precise Woodworking Fastening Applications Slim contact tip design enables precise fastening in wood trim, crown moulding, baseboard, casing, cabinetry and other woodworking...
    AF505N
    CAD $115.00
    Pre-Order Now
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley