Accessories

Accessories

  • ROUTER COLLET EXTENDER 1/2IN. B3667

    Now: $26.99
    Was: $28.99
    B3667 It's often impossible to raise a router bit high enough on table mounted routers so the addition of a router collet extension to your setup makes it possible on 1/2" collet routers. (Wrenches are not included.) Specifications: 1/2" shank 1/2"...
    B3667
    Now: $26.99
    Was: $28.99
    Add to Cart
  • ROUTER SPEED CONTROL 115V 15A

    ROUTER SPEED CONTROL 115V 15A

    Now: $65.00
    Was: $75.00
      This unit provides full variable speed control on your single speed router or laminate trimmer. This control is equipped with a 3 position switch that allows you to operate your router at full speed or variable speed settings, as well as control...
    B1850
    Now: $65.00
    Was: $75.00
    Pre-Order Now
  • Microjig

    MATCHFIT DOVETAIL ROUTER BIT

    Now: $35.99
    Was: $42.99
    MB0500514 MATCHFIT DOVETAIL ROUTER BIT The MATCHFIT Dovetail Router Bit makes the MATCHFIT system quicker and easier to use. It is designed especially for the MATCHFIT Dovetail Clamps and dovetail hardware. Its original design rounds over the sharp top...
    MB0500514
    Now: $35.99
    Was: $42.99
    Add to Cart
  • ALUMINUM ROUTER TABLE INSERT PLATE 9IN. X12

    Now: $52.99
    Was: $74.99
    B3494 Aluminum Router Table Plate Insert Our 1/4" thick aluminum router table insert will support the heaviest of routers, without plate sag. The plate is about 9" x 12" and includes levelling screws and magnets to secure the plate in the table...
    B3494
    Now: $52.99
    Was: $74.99
    Add to Cart
  • Makita

    MAKITA 18V 5.0AH LI ION LXT BATTERY

    Now: $129.00
    Was: $149.99
    BL1850B 18V 5.0Ah Lithium-Ion Battery - MAKITA 18V Lithium-Ion battery 5.0Ah With battery charge level indicator Voltage: 18V Capacity: 5.0Ah Compatible Charger: DC18RA- Charge time45min Compatible Charger: DC18RC- Charge time45min Compatible...
    BL1850B
    Now: $129.00
    Was: $149.99
    Add to Cart
  • DELUXE FEATHER BOARD WITH T SLOT HOLDER

    Now: $13.99
    Was: $15.99
    B3260 Retrofit Featherboard Kit with T-slot Holder Featuring two T-slot locking nuts with knobs, this high quality retrofit feather kit quickly attaches to your working surfaces and stays put when the knobs are tightened. Great for router tables, table...
    B3260
    Now: $13.99
    Was: $15.99
    Add to Cart
  • FEATHER BOARD SAFETY 5 PC SET

    Now: $19.99
    Was: $23.99
    B3276 5pc Featherboard Safety Set The 5-piece shop safety kit allows you to keep your hands safe from table saw, router table, shaper table and jointer while operation. INCLUDES two push stick one push block one notch stick one featherboard
    B3276
    Now: $19.99
    Was: $23.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/8IN.

    SLICK PLATE 36IN. X 4IN. X 1/8IN.

    $9.99
    UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...
    B237718
    $9.99
    Add to Cart
  • SIGN PRO SIGN MAKING JIG MILESCRAFT

    Milescraft

    SIGN PRO SIGN MAKING JIG MILESCRAFT

    Now: $79.99
    Was: $92.99
    New Sign Pro - MilesCraft The Sign Pro has the improved features of Sign Crafter and is by far MilesCraft's best sign making jig. Easily create up to 36" long signs that are professional looking and less time consuming. To increase the stability, the...
    1212
    Now: $79.99
    Was: $92.99
    Add to Cart
  • BUSHINGSET MILESCRAFT

    Milescraft

    BUSHINGSET MILESCRAFT

    $16.99
    Metal Nose Turn Lock Bushings Set - MilesCraft This guide bushing is for Milescraft's turn lock base plate that comes with router tools. It includes a top hat bushing adaptor for converting the standard metal bushings into turn lock bushings. Features:...
    1216
    $16.99
    Pre-Order Now
  • SWING STOP KREG

    Kreg

    SWING STOP KREG

    $45.00
    KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.
    KMS7801
    $45.00
    Add to Cart
  • ROUTER GUIDE BUSHING KIT

    ROUTER GUIDE BUSHING KIT

    Now: $17.99
    Was: $19.99
    B1947 Router Base Plate & Bushing Kit 6" universal base plate 5/16" and 7/16" short guide bushings 7/16" and 5/8" long guide bushings Use with (a) Dovetail fixtures (b) Letter templates (c) Butt hinge templates
    B1947
    Now: $17.99
    Was: $19.99
    Add to Cart
  • BASE PLATE/BUSHING SET

    Milescraft

    BASE PLATE/BUSHING SET

    $27.99
    1201 Baseplate/Bushing Set - MilesCraft Forget fumbling with tiny bolts and screwdrivers. The TurnLock™ concept turns changing guide bushings, and installing router attachments, into a simple matter of a 1/4 twist.  Just align the TurnLock™ bushing...
    1201
    $27.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/2IN.

    SLICK PLATE 36IN. X 4IN. X 1/2IN.

    $25.99
    B237712 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router ...
    B237712
    $25.99
    Add to Cart
  • ROUTER BIT DEPTH GAUGE

    ROUTER BIT DEPTH GAUGE

    Now: $5.99
    Was: $6.99
    Router Bit Depth Gauge You're all set to rout V-groove into a piece of expensive stock. How can you be sure the depth you've set is the depth the router will cut? Simple. Check it with this handy router depth gauge. The guide is clearly marked in 16ths...
    B1309
    Now: $5.99
    Was: $6.99
    Add to Cart
  • SLICK PLATE 36IN. X 3/4IN. X 3/8IN.

    SLICK PLATE 36IN. X 3/4IN. X 3/8IN.

    $11.99
    B2378 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits...
    B2378
    $11.99
    Add to Cart
  • PRECISION ROUTER TABLE INSERT LEVELERS

    Kreg

    PRECISION ROUTER TABLE INSERT LEVELERS

    $24.99
    PRS3040 Precision Router Table Insert Plate Levellers - KREG 8 adjustable points of contact Four-corner lock-downs Locating tabs for easy installation Package includes 4 Insert Plate Levellers Designed for 3/4" corner radius Works with router tables up...
    PRS3040
    $24.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/4IN.

    SLICK PLATE 36IN. X 4IN. X 1/4IN.

    $15.99
    UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...
    B237714
    $15.99
    Add to Cart
  • ROUTER TABLE INSERT

    ROUTER TABLE INSERT B2465

    Now: $31.99
    Was: $36.99
    Router Table Insert 3/8” phenolic plate with inserts for 1 1/4”, 2 5/8”, and 3 7/8” openings. Size 9” x 12”
    B2465
    Now: $31.99
    Was: $36.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley