null

Woodworking

Woodworking

  • ¼ X ¾ UP SPIRAL FLAT ROUTER BIT
    Add to Cart

    Shaper Origin

    ¼ X ¾ UP SPIRAL FLAT ROUTER BIT

    CAD $33.00
    This is our most commonly used cutter for working with any wood type, be it ply or hardwood, at 1/4" cutter diameter it is able to cut 1/4" deep per pass up to a maximum depth of 3/4". Two cutting flutes enable the cutter to be moved rapidly through...
    SE125002500U
    CAD $33.00
    Add to Cart
  • ZEROPLAY MITER BAR 2 PACK MICROJIG
    Add to Cart

    Microjig

    ZEROPLAY MITER BAR 2 PACK MICROJIG

    CAD $55.99
    Calibrate your miter bar quickly and accurately from above the sled. ZeroPlay Miter Bars are adjusted to fit the miter slot while it is attached to your sled, allowing you to get the best fit possible. Just set, test, and adjust if needed, then begin...
    ZP750B2S2
    CAD $55.99
    Add to Cart
  • ZERO CLEARNCE INSERT FOR CX212
    Add to Cart

    ZERO CLEARNCE INSERT FOR CX212

    CAD $69.99
    This zero-clearance insert for the CX212 10" Cabinet Saw 2HP is useful when trying to reduce or prevent tear out when using certain stocks or laminates. Leveling screws and a concealed tool-free latch ensure a secure, precise fit with your saw. Clearance...
    CX212ZEROCL
    CAD $69.99
    Add to Cart
  • WOODWORKING TABLE VISE ECONOMY B3345
    Add to Cart

    WOODWORKING TABLE VISE ECONOMY B3345

    CAD $39.99
    B3345 Woodworking Table Vise Durable cast iron Ideal for beginners or hobbyists Jaws are 6" x 2" 4-3/8" Jaw opening Pre-drill holes allows you to permanently mount it to a bench e-drill holes allows you to permanently mount it to a bench  
    B3345
    CAD $39.99
    Add to Cart
  • WOODWORK VISE QUICK RELEASE 9IN.
    Pre-Order Now

    Groz

    WOODWORK VISE QUICK RELEASE 9IN. B2627

    CAD $229.99
    9" Quick Release Woodworking Vise A traditional pattern woodworking vice equipped with the quick release mechanism. Simply pressing the trigger initiates the quick action, with the front jaw sliding freely, thereby allowing large or small work pieces to...
    B2627
    CAD $229.99
    Pre-Order Now
  • WOODTURNING TOOLS CURVED SCRAPER SORBY
    Add to Cart

    Robert Sorby

    WOODTURNING TOOLS CURVED SCRAPER SORBY

    CAD $93.99
    Curved Scraper - Robert Sorby The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an aggressive cut, whilst retaining...
    828H
    CAD $93.99
    Add to Cart
  • WOOD VISE QUICK RELEASE 7IN. Q.
    Add to Cart

    Groz

    WOOD VISE QUICK RELEASE 7IN. Q.

    CAD $178.99
    Quick Setting Woodworker's Vise 7" The jaws are made of heavy-duty close grain cast iron. Handle and shafts are chrome plated for smooth operation and long life. "TOE - IN" feature. When fully closed the jaws meet only at the top to...
    B413
    CAD $178.99
    Add to Cart
  • WOOD VISE CARPENTERFT S 9IN.
    Add to Cart

    Groz

    WOOD VISE CARPENTERFT S 9IN.

    CAD $81.99
    9" Woodworking Vise Features Mounts flush with top of your bench Heavy-duty close grain cast iron construction Top quality workmanship for smooth action and long life Handles and spindles are chrome-plated Vise nut made of malleable cast iron...
    B923
    CAD $81.99
    Add to Cart
  • WOOD LATHE WITH DIGITAL READOUT CSA
    Add to Cart

    Craftex CX Series

    WOOD LATHE WITH DIGITAL READOUT CSA CX803

    Now: CAD $1,049.00
    Was: $1,199.00
    CX803 14" x 43", 3/4HP Wood Lathe - Craftex CX-Series Equipped with a 3/4 HP motor, this 14" x 43" wood lathe can swing 14" over bed and features variable spindle speed ranges from 600 to 2400 RPM. The 43" distance between the centers and the...
    CX803
    Now: CAD $1,049.00
    Was: $1,199.00
    Add to Cart
  • WOOD LATHE CHUCK SET 4.5IN.
    Add to Cart

    WOOD LATHE CHUCK SET 4.5IN.

    Now: CAD $369.00
    Was: $419.00
    B3616 4.5" Chuck Set for Wood Lathe This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured. This chuck set will fit 1" x 8 tpi spindle. Includes: Four...
    B3616
    Now: CAD $369.00
    Was: $419.00
    Add to Cart
  • WOOD LATHE CHUCK SET 3.75IN.
    Pre-Order Now

    WOOD LATHE CHUCK SET 3.75IN.

    CAD $319.00
    B3615 3.75" Chuck Set for Wood Lathe This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured. This chuck set will fit 1" x 8 tpi spindle. Includes: ...
    B3615
    CAD $319.00
    Pre-Order Now
  • WOOD LATHE 18IN. X 47IN. HEAVY DUTY CSA CX802
    Add to Cart

    Craftex CX Series

    WOOD LATHE 18IN. X 47IN. HEAVY DUTY CSA CX802

    Now: CAD $2,999.00
    Was: $3,399.00
    CX802 This CX Series lathe has all the features any serious turner would be looking for. This model is an improved version of our CT128N, where we have changed from a (brushless) DC motor to a heavy duty 3-phase AC motor. The machine now features...
    CX802
    Now: CAD $2,999.00
    Was: $3,399.00
    Add to Cart
  • WHEEL MARKING GUAGE 8IN.
    Pre-Order Now

    WHEEL MARKING GUAGE 8IN.

    CAD $34.99
    B3665 This handy tool eliminates the many problems associated with standard marking gauges. The sharpened steel cutter slices a line instead of scratching like pin marking gauges. The 8" steel shaft is marked in 1/16ths and the body is aluminum with a...
    B3665
    CAD $34.99
    Pre-Order Now
  • WATER COOLED SPINDLE SYSTEM NEXT WAVE CN
    Add to Cart

    Next Wave CNC

    WATER COOLED SPINDLE SYSTEM NEXT WAVE CN

    Now: CAD $906.61
    Was: $1,199.00
    The 20145NWCNC Shark HD5 Series 2 HP Spindle is ultra-quiet with long life bearings and is designed for harsh environment operations.The spindle is 110V AC and will plug directly into the wall socket (requires 15 amp circuit).Kit includes everything...
    Clearance
    20145NWCNC
    Now: CAD $906.61
    Was: $1,199.00
    Add to Cart
  • VISE WOODWORKING 16IN. QUICK RELEASE
    Add to Cart

    Groz

    VISE WOODWORKING 16IN. QUICK RELEASE

    CAD $275.00
    16" Woodworking Vise with Quick Release A traditional pattern woodworking vice equipped with the quick release mechanism. Simply pressing the trigger initiates the quick action, with the front jaw sliding freely, thereby allowing large or small work...
    B2773
    CAD $275.00
    Add to Cart
  • VISE PRECISION TILTING AND SWIVELING
    Add to Cart

    VISE PRECISION TILTING AND SWIVELING

    CAD $189.00
    B3108 Precision Tilting and Swivelling Machine Vise This precision machine vise is manufactured from close grained high tensile seasoned cast iron. The angular slide allows tilting that can be set to any desired angle 45-degree on either side. The...
    B3108
    CAD $189.00
    Add to Cart
  • VISE MULTI ANGLE 3IN. WIDE OPENS 2 1/2IN.
    Add to Cart

    VISE MULTI ANGLE 3IN. WIDE OPENS 2 1/2IN.

    CAD $49.99
    Multi-Angle Vise We were quite impressed with this unit. Its locking mechanism (which is the main "beef" against this kind of vise) is very effective Made of aluminum die cast. Its 3" wide jaws open 2 3/4" wide. Rubberized safety jaws Vise swivels 360...
    B1942
    CAD $49.99
    Add to Cart
  • VISE CROSS SLIDING 5IN.
    Add to Cart

    VISE CROSS SLIDING 5IN.

    CAD $135.00
    Cross Sliding Vise Exclusive slide-bar under vise-jaw prevents jaws from tilting up or sideways. Vise fits most drill presses and allows X and Y layouts of holes Overall Height 6" Base measure 6 1/2" x 10 1/2" Width of jaws 5" Opening of jaws 4 3/4"...
    B1959
    CAD $135.00
    Add to Cart
  • VISE CROSS 4IN. BASE 5 1/2IN. X 10 1/2IN.
    Pre-Order Now

    VISE CROSS 4IN. BASE 5 1/2IN. X 10 1/2IN.

    CAD $119.00
    Cross Sliding Vise The Exclusive slide-bar under the vise-jaw prevents jaws from tilting up or sideways. This Vise fits most drill presses and allows X and Y layouts of holes A great addition to a bench Mortiser or any shop. Overall Height 5 1/4" Base...
    B017
    CAD $119.00
    Pre-Order Now
  • VISE ANGLE 4IN. X 11/2IN. DEEP JAWS
    Add to Cart

    VISE ANGLE 4IN. X 1 1/2IN. DEEP JAWS

    Now: CAD $63.99
    Was: $119.00
    4" Angle Vise The H.D vise features dovetailed ways to make the vise sturdy and consistent in locating angles from 0 to 90 degree. The jaws are 1 1/2" deep and are designed to hold round stock as well. Weight: 6.3 kg
    Clearance
    B1722
    Now: CAD $63.99
    Was: $119.00
    Add to Cart
  • VISE ADAPTOR FOR CX614 CT019N DRILL PRES
    Add to Cart

    VISE ADAPTOR FOR CX614 CT019N DRILL PRES

    CAD $59.99
    This Vice Adaptor allows you to convert your cross-sliding vise into a vise table. Precision-engineered to effortlessly replace the table on CX614 and CT019N drill presses. Simply just slide the table out of its clamping bracket and slide the adapter in...
    B4188
    CAD $59.99
    Add to Cart
  • VISE 6IN. WOODWORKING CLAMP TYPE
    Add to Cart

    Groz

    VISE 6IN. WOODWORKING CLAMP TYPE

    CAD $60.99
    6" Portable Woodworking Vise Close grained cast iron jaws with holes to attach wooden jaws Chrome plated Acme thread screw and guide rods May be clamped to any 2 1/2" bench top or attached permanently through clamping slots Weight: 2.75kg.
    B2581
    CAD $60.99
    Add to Cart
  • VISE 5IN. DRILL PRESS
    Add to Cart

    VISE 5IN. DRILL PRESS

    CAD $49.99
    5" Drill Press Vise Cast iron base with 5" hardened steel jaws 5/8" acme thread knurled handle with tightening pin 7 1/2" wide Weight: 7kg.
    B2541
    CAD $49.99
    Add to Cart
  • VERTICAL FEATHERBOARD ATTACHMENT W/RISER
    Add to Cart

    VERTICAL FEATHERBOARD ATTACHMENT W/RISER

    CAD $35.00
    B3036 Vertical Featherboard Attachment with Risers - MAG SWITCH The Vertical Attachment Is Really Three Tools In One! When used with the Magswitch Pro Featherboard, the Vertical Attachment creates an adjustable, stackable featherboard unlike any other...
    B3036
    CAD $35.00
    Add to Cart
  • VECTRIC VCARVE PRO SOFTWARE V10
    Add to Cart

    Axiom CNC

    VECTRIC VCARVE PRO SOFTWARE V10

    CAD $999.00
    ***SPECIAL ORDER PLEASE ALLOW FOR 3 TO 4 WEEKS FOR DELIVERY. EXTRA SHIPPING CHARGES WILL APPLY*** Comprehensive set of 2D vector design tools and large variety of toolpath strategies including profiling, pocketing, drilling, v-carving, texturing and...
    AVC308
    CAD $999.00
    Add to Cart
  • VECTRIC VCARVE DESKTOP SOFTWARE V10
    Add to Cart

    Axiom CNC

    VECTRIC VCARVE DESKTOP SOFTWARE V10

    CAD $499.00
    ***SPECIAL ORDER PLEASE ALLOW FOR 3 TO 4 WEEKS FOR DELIVERY. EXTRA SHIPPING CHARGES WILL APPLY*** This software is only compatible with machines with maximum 24" x 24" working envelope (AR1, AR4 and i2R-4 models) The Desktop edition is specifically...
    AVC302
    CAD $499.00
    Add to Cart
  • VECTRIC PHOTO VCARVE SOFTWARE
    Add to Cart

    Axiom CNC

    VECTRIC PHOTO VCARVE SOFTWARE

    CAD $229.00
    ***SPECIAL ORDER PLEASE ALLOW FOR 3 TO 4 WEEKS FOR DELIVERY. EXTRA SHIPPING CHARGES WILL APPLY*** PhotoVCarve has been developed to allow CNC machines to carve and engrave in a way that until now could only be done using an expensive laser marking...
    AVC100
    CAD $229.00
    Add to Cart
  • VECTRIC ASPIRE SOFTWARE V10
    Add to Cart

    Axiom CNC

    VECTRIC ASPIRE SOFTWARE V10

    CAD $2,799.00
    ***SPECIAL ORDER PLEASE ALLOW FOR 3 TO 4 WEEKS FOR DELIVERY. EXTRA SHIPPING CHARGES WILL APPLY*** Aspire (AVC408) is built on the same platform as Vectric's VCarve Pro software, sharing the intuitive interface and ease of use for production design...
    AVC408
    CAD $2,799.00
    Add to Cart
  • VACUUM HOLD DOWN KIT FITS ALL MODELS ALL
    Add to Cart

    Laguna

    VACUUM HOLD DOWN KIT FITS ALL MODELS ALL

    CAD $229.00
    These compact vacuum pods are made from phenolic resin, each with it's own vacuum seal. Each pod is connected together to cover a large area. Pods are mounted and secured to the table with screws and T-Nuts (included). Pods are...
    I24VACUUMKIT
    CAD $229.00
    Add to Cart
  • V CARVE PRO VERSION
    Add to Cart

    Next Wave CNC

    V CARVE PRO VERSION

    CAD $950.00
    VCarve Pro provides a powerful but intuitive software solution for creating and cutting parts on a CNC Router. VCarve Pro gives you the power to produce complex 2D patterns with profile, pocket, drill and inlay toolpaths, plus gives you the ability to...
    VCARVEPRO
    CAD $950.00
    Add to Cart
  • V CARVE DESKTOP VERSION
    Pre-Order Now

    Next Wave CNC

    V CARVE DESKTOP VERSION

    CAD $399.00
    VCarve Desktop provides a powerful but intuitive software solution for creating and cutting parts on a CNC Router. VCarve Desktop gives you the power to produce complex 2D patterns with profile, pocket, drill and inlay toolpaths, plus gives you the...
    VCARVEDSKTOP
    CAD $399.00
    Pre-Order Now
  • V BLOCK 5IN.
    Pre-Order Now

    V BLOCK 5IN.

    CAD $70.99
    V-Block - 3" x 2 3/8" x 2 5/8", 3.2kg. Supples in matched and numbered pairs, these V-Blocks are manufactured from high quality castings properly seasoned against distortion and are accurately machined square and parallel Overall dimensions: 5.00"L x 3...
    B363
    CAD $70.99
    Pre-Order Now
  • V BLOCK 4
    Add to Cart

    V BLOCK 4

    CAD $49.99
    V-Block - 4" x 2 5/8" x 3 1/2" 2.25 kg. Supples in matched and numbered pairs, these V-Blocks are manufactured from high quality castings properly seasoned against distortion and are accurately machined square and parallel
    B362
    CAD $49.99
    Add to Cart
  • V BLOCK 3
    Add to Cart

    V BLOCK 3

    CAD $26.99
    V-Block - 3" x 2 3/8" x 2 5/8", 1kg. Supples in matched and numbered pairs, these V-Blocks are manufactured from high quality castings properly seasoned against distortion and are accurately machined square and parallel
    B361
    CAD $26.99
    Add to Cart
  • URETHANE TIRE FOR 14IN. BANDSAWS PAIR
    Add to Cart

    Shop Fox

    URETHANE TIRE FOR 14IN. BANDSAWS PAIR

    CAD $89.99
    Replace worn out bandsaw tires for improved performance. Fits most 14" bandsaw wheels from various brands.Easy installation and sold in a pair for added value. Includes 2 x 14” Urethane Bandsaw tires  
    D4014
    CAD $89.99
    Add to Cart
  • UNIVERSAL FEATHERBOARD MAG SWITCH
    Add to Cart

    UNIVERSAL FEATHERBOARD MAG SWITCH

    CAD $91.00
    B3028 Universal Feather Board - MAG SWITCH Works On Both Sides Of The Blade, And Even The Fence. Low profile and double sided, this is the ultimate featherboard from Magswitch. Works to improve your cutting results on either side of the blade. Also...
    B3028
    CAD $91.00
    Add to Cart
  • TURNERS MESH SANDING PACK
    Add to Cart

    TURNERS MESH SANDING PACK

    CAD $39.99
    Turners Mesh Abrasive Roll Each Turners Mesh Abrasive strip has tiny holes in it to allow the wood particles to pass through. This helps prevent clogging the abrasive surface which makes the strips perfect for sanding projects on your lathe. The...
    B4157
    CAD $39.99
    Add to Cart
  • TRIGRIPS MILESCRAFT
    Add to Cart

    TRIGRIPS MILESCRAFT

    CAD $9.99
    1600 Tri Grips – MILESCRAFT These Non-slip friction pads hold projects in place without clamps while routing, sand, painting, etc Platforms elevate projects 1-3/16 inch above the work surface for complete access to edges for painting Exclusive...
    1600
    CAD $9.99
    Add to Cart
  • TREND AIR STEALTH NIOSH FILTER 1PAIR
    Add to Cart

    Trend Routing Technology

    TREND AIR STEALTH NIOSH FILTER 1PAIR

    CAD $26.99
    B3990 TREND AIR STEALTH NIOSH FILTER 1PAIR Pair of N100 filters for AIR STEALTH half mask with Twin HEPAC* pleat encapsulated design filter provides 99.97% filtration of airborne particles and non-oil based aerosols at 0.3 micron and above...
    B3990
    CAD $26.99
    Add to Cart
  • TREND AIR STEALTH LITE RESPIRATOR SET 5
    Add to Cart

    Trend Routing Technology

    TREND AIR STEALTH LITE RESPIRATOR SET 5

    CAD $39.99
    Lightweight Frame with Reusable Disposable N99 Rated Filters, a high-quality respiratory protection solution for various work environments. This mask features a lightweight frame and N99 rated filters with exceptional filtration efficiency, capturing...
    B4122N
    CAD $39.99
    Add to Cart
  • TRACK SAW KIT WITH S AND L RAIL DEWALT
    Pre-Order Now

    DeWalt

    TRACK SAW KIT WITH S AND L RAIL DEWALT

    CAD $949.00
    DWS520CK 6-1/2" Corded Track Saw - DeWalt This 6-1/2" Corded Track Saw Kit with 59" and 102" Track provides user, the table saw power and precision, the panel saw rip capacity and the portability needed for the job site. Features Include...
    DWS520CK
    CAD $949.00
    Pre-Order Now
  • TOOLMAKERFT S INK BLUE 12AV OZ AEROSOL CAN
    Add to Cart

    Crown Lubricants

    TOOLMAKERS INK BLUE 12AV OZ AEROSOL CAN

    CAD $18.99
    Toolmaker's Ink Enables accurate scribing without glare Produces quick-drying film that won't peel, flake or rub off Contains no acids Resists heat 340 gram
    66001
    CAD $18.99
    Add to Cart
  • TOOL REST STEM 7/8IN. X 4.3/4IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST STEM 7/8IN. X 4.3/4IN.

    CAD $18.99
    765S22 7/8" Diameter Stem x 4-3/4" Long - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is...
    765S22
    CAD $18.99
    Pre-Order Now
  • TOOL REST STEM 1IN. X 6IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST STEM 1IN. X 6IN.

    CAD $21.99
    765S24L 1" Diameter Stem x 6" Long - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used...
    765S24L
    CAD $21.99
    Pre-Order Now
  • TOOL REST STEM 1IN. X 4.3/4IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST STEM 1IN. X 4.3/4IN.

    CAD $26.99
    765S24 1" Diameter Stem x 4-3/4" Long - Robert Sorby These high quality modular tool rest posts are made from super strong, precision ground polished alloy steel for vibration free turning. This modular tool rest system enables the turner to build up a...
    765S24
    CAD $26.99
    Pre-Order Now
  • TOOL REST 5/8IN. STEM 3 1/2IN.
    Pre-Order Now

    Robert Sorby

    TOOL REST 5/8IN. STEM 3 1/2IN.

    CAD $24.99
    765S16 TOOL REST 5/8" STEM 3 1/2" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rest: 4", 6" and...
    765S16
    CAD $24.99
    Pre-Order Now
  • TOOL REST 25MM STEM 4 3/4IN.
    Pre-Order Now

    TOOL REST 25MM STEM 4 3/4IN.

    CAD $25.99
    765S25 TOOL REST 25MM STEM 4 3/4" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rests: 4", 6"...
    765S25
    CAD $25.99
    Pre-Order Now
  • TOOL REST 25MM STEM 2 1/4IN.
    Add to Cart

    TOOL REST 25MM STEM 2 1/4IN.

    CAD $19.99
    765S25S TOOL REST 25MM STEM 2 1/4" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rest: 4", 6"...
    765S25S
    CAD $19.99
    Add to Cart
  • TOOL REST 20MM STEM 4 3/4IN.
    Add to Cart

    TOOL REST 20MM STEM 4 3/4IN.

    CAD $18.99
    765S20 TOOL REST 20MM STEM 4 3/4" Part of Robert Sorbey's modular tool rest system that enables the turner to build up a variety of tool rests without going to having to deal with the great expense. This line consists of six different rests: 4", 6"...
    765S20
    CAD $18.99
    Add to Cart
  • THREAD CUTTER 16TPI C/W HANDLE SORBY
    Add to Cart

    Robert Sorby

    THREAD CUTTER 16TPI C/W HANDLE SORBY

    CAD $123.99
    Thread Cutter - 16TPI Cutting tools have been produced in 10, 16 and 20 thread per inch, with a unique, enhanced helix angle specially designed for use in wood to compliment these excellent tools. A Relief Cutting Tool Support Rest makes...
    890H16
    CAD $123.99
    Add to Cart
  • TENONING JIG CRAFTEX
    Add to Cart

    Craftex

    TENONING JIG CRAFTEX

    CAD $169.00
    Super Tenon Jig All cast iron to fit any 3/4" table slot with adjusters for fit Screw clamping to 5" clamping plate with adjustment to 20 degree from vertical 45 degree fence to allow compound angles Micro adjustment Two handles for control Designed to...
    CT084
    CAD $169.00
    Add to Cart
  • TALON CHUCK
    Add to Cart

    ONEWAY

    TALON CHUCK

    CAD $249.00
    2985 Talon Chuck - Oneway  The Talon chuck is designed for wood lathes with a swing of 16" or less. The chuck body is 3-1/2" and is operated with the use of a key. This will give the operator solid holding power and one-handed operation...
    2985
    CAD $249.00
    Add to Cart
  • TABLE VISE 2IN.
    Add to Cart

    Groz

    TABLE VISE 2IN.

    CAD $19.99
    "Clamp On" Machine Vise 2" Groz The body of this 2" vise is made from high grade cast iron, and the clamp is provided for a firm grip. The handle and bar are chrome plated.
    B9862
    CAD $19.99
    Add to Cart
  • TABLE INSERT ALUMINIUM RIKON
    Add to Cart

    Rikon

    TABLE INSERT ALUMINIUM RIKON

    Now: CAD $18.32
    Was: $19.00
    Table Insert Aluminum for Rikon Band saw *SPECIAL ORDER PLEASE ALLOW FOR 2 TO 3 WEEKD FOR DELIVERY This aluminum table insert will fit all Rikon 14" & 18" Band saw except 10-346 Features: For use with all Rikon 14" & 18" Bandsaw except 10-346 Diameter: 2...
    C10395
    Now: CAD $18.32
    Was: $19.00
    Add to Cart
  • SWING STOP KREG
    Add to Cart

    Kreg

    SWING STOP KREG

    CAD $59.99
    KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.
    KMS7801
    CAD $59.99
    Add to Cart

Busy Bee Tools has the woodworking machines and tools that every serious woodworker is after. With a wide selection of band saws, table saws, planers, jointers, sanders, shapers, router tables, wood lathes and more, you can count on Busy Bee Tools for your woodworking needs. Our two in house brands, Craftex and Craftex CX-Series feature two and three year warranties respectively and these in house brands are bought and sold directly to the end user, avoiding middleman markups and saving you money. For the serious woodworker, Busy Bee Tools is the number one choice.

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley