Layout and Marking Tools

Layout and Marking Tools

  • STEEL SQUARE 6IN.

    Groz

    STEEL SQUARE 6IN.

    Now: CAD $11.99
    Was: $14.99
    6” Steel Square Made of finest tool steel hardened and tempered. Squares have true right angles, both inside and outside. Beams and blades are ground and lapped for straightness and parallelism.
    B618
    Now: CAD $11.99
    Was: $14.99
    Add to Cart
  • PRECISION RULE 12IN. INCRA

    Incra

    PRECISION RULE 12IN. INCRA

    Now: CAD $37.99
    Was: $41.99
    INCRA T-RULE 12" Incra T-Rules make it very easy to draw exact lines in either direction. INCRA scores again with its precision steel rule Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. ...
    TRULE12
    Now: CAD $37.99
    Was: $41.99
    Add to Cart
  • Milescraft

    HINGE BIT 5/64IN. NO. 4 MILESCRAFT

    CAD $7.99
    2314 #4 Hinge Bit - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Size: 5/64" Screw compatibility: #3 & #4
    2314
    CAD $7.99
    Add to Cart
  • Milescraft

    BIT SHELF PIN 5MM MILESCRAFT

    CAD $14.99
    2312 5mm Shelf pin Bit - Miles Craft Self-Centering Custom Spring-Loaded Brad Point Drill Bit Self-centering boring bits in 5 mm diameter 3/8" guide bushing for precise and repeatable hole locations Spring-loaded HSS brad point drill bit
    2312
    CAD $14.99
    Add to Cart
  • Milescraft

    TRIM 45 MILESCRAFT

    Now: CAD $14.99
    Was: $16.99
    8401 Trim45 Carpentry Aid - Milescraft The Milescraft Trim45 trim carpentry aid is the handiest tool in the toolbox when it comes to installing door and window casement trim, as well as decorative trim work projects such as fireplaces or bookshelves...
    8401
    Now: CAD $14.99
    Was: $16.99
  • PARALLEL CLAMPS 2IN.

    Groz

    PARALLEL CLAMPS 2IN.

    CAD $8.99
    Tool Makers Parallel Clamp - Groz Excellent for layout and set up Made of hardened tool steel Includes spring clip and a retain ring Opening: 1 1/4" Jaw length: 2"
    B613
    CAD $8.99
    Add to Cart
  • V BLOCK 3

    V BLOCK 3

    Now: CAD $17.99
    Was: $21.99
    V-Block - 3" x 2 3/8" x 2 5/8", 1kg. Supples in matched and numbered pairs, these V-Blocks are manufactured from high quality castings properly seasoned against distortion and are accurately machined square and parallel
    B361
    Now: CAD $17.99
    Was: $21.99
    Add to Cart
  • Groz

    SPRING DIVIDER 12IN.

    Now: CAD $13.49
    Was: $17.99
    Spring Calipers 12" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B589
    Now: CAD $13.49
    Was: $17.99
    Add to Cart
  • STEEL SQUARE 8IN.

    Groz

    STEEL SQUARE 8IN.

    Now: CAD $19.99
    Was: $22.99
    8" Steel Square Made of finest tool steel hardened and tempered. Squares have true right angles, both inside and outside. Beams and blades are ground and lapped for straightness and parallelism.
    B619
    Now: CAD $19.99
    Was: $22.99
    Add to Cart
  • SQUARE 6IN.

    SQUARE 6IN.

    Now: CAD $8.99
    Was: $10.99
    B3098 6" Square and Scale This 6" stainless steel square features a wide base for precision and stability and it also includes a 6" scale with inch and metric measurements.
    B3098
    Now: CAD $8.99
    Was: $10.99
  • Milescraft

    BASE PLATE/BUSHING SET

    CAD $27.99
    1201 Baseplate/Bushing Set - MilesCraft Forget fumbling with tiny bolts and screwdrivers. The TurnLock™ concept turns changing guide bushings, and installing router attachments, into a simple matter of a 1/4 twist.  Just align the TurnLock™ bushing...
    1201
    CAD $27.99
    Add to Cart
  • EDGE AND CENTRE FINDER 1/2IN. DIA

    Groz

    EDGE AND CENTRE FINDER 1/2IN. DIA

    Now: CAD $10.99
    Was: $13.99
    B568 Edge and Centre Finder -GROZ Edge and Center Finders are time saving positioning tools for use on jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, center points & scribed lines. Diameter:...
    B568
    Now: CAD $10.99
    Was: $13.99
    Add to Cart
  • COMBINATION SQUARE

    COMBINATION SQUARE

    Now: CAD $77.99
    Was: $82.99
    Combination Square Set Precision combination squares of high quality cast iron with 12" tempered blade in frosted chrome finish. Includes square centre head and protractor.
    220850
    Now: CAD $77.99
    Was: $82.99
    Add to Cart
  • SPRING DIVIDER 6IN.

    Groz

    SPRING DIVIDER 6IN.

    Now: CAD $6.99
    Was: $8.99
    Spring Calipers 6" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B1241
    Now: CAD $6.99
    Was: $8.99
    Add to Cart
  • ANGLE FINDER MULTI PURPOSE ALUMINIUM

    ANGLE FINDER MULTI PURPOSE ALUMINIUM

    Now: CAD $30.99
    Was: $37.50
    Angle Finder (Professional) Anodized aluminum construction with stainless steel pivots ensures strength and durability of the angle finder. The horizontal scale is 20" long and the rotating scale is 9" long and a plastic pouch is included for storage. ...
    B1730AL
    Now: CAD $30.99
    Was: $37.50
    Add to Cart
  • V BLOCK ULTIMATE

    Groz

    V BLOCK ULTIMATE

    Now: CAD $62.99
    Was: $79.99
    The Ultimate V-Block Here is an improved V-Block. It can be used on its base, on its end or flat on either side and an adjustable side screw with caps is provided to support the V-Block. The block also has 4 tapped holes, two in the base and one on each...
    B026
    Now: CAD $62.99
    Was: $79.99
    Add to Cart
  • Milescraft

    HINGE BIT SET 3PCS NO. 4 NO. 6 NO. 8 MILESCRAFT

    Now: CAD $15.99
    Was: $17.99
    2317 Hinge Bit Set #4, #6 and #8 - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Sizes: 5/64", 7/64", 9/64" Screw compatibility: #3, #4, #5, #6, #8 & #10
    2317
    Now: CAD $15.99
    Was: $17.99
    Add to Cart
  • Milescraft

    CABINET MATE 1/4IN. MILESCRAFT

    CAD $32.99
    1316 CabinetMate - Milescraft Ever wonder how to make level, wobble-free cabinet shelves? The Milescraft CabinetMate is just the tool to get the job done. This easy to use, lightweight and durable jig is a great alternative to shop made jigs, which...
    1316
    CAD $32.99
    Add to Cart
  • 1 2 3 BLOCK

    1 2 3 BLOCK

    Now: CAD $14.99
    Was: $25.99
    Precision Ground 1-2-3 Blocks A must for a good machine shop Very handy for precision layout work| Hardened and ground surface. Blocks are matched to .0001" per inch Measures: 1" x 2" x 3"
    B653
    Now: CAD $14.99
    Was: $25.99
    Pre-Order Now
  • 6IN. PRECISION DOUBLE SQUARE IGAGING

    Igaging

    6IN. PRECISION DOUBLE SQUARE IGAGING

    Now: CAD $26.99
    Was: $29.99
    B3134 6" Precision Double Square - Igaging Graduate in 8ths, 32nds and 64ths Precision Ground Satin Chrome Blades US Standard Size: 6"
    B3134
    Now: CAD $26.99
    Was: $29.99
    Pre-Order Now
  • Groz

    SPRING DIVIDER 10IN.

    Now: CAD $11.49
    Was: $15.99
    Spring Calipers 10" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B586
    Now: CAD $11.49
    Was: $15.99
    Add to Cart
  • EDGE FINDER DOUBLE

    Groz

    EDGE FINDER DOUBLE

    Now: CAD $9.99
    Was: $12.99
    B569 Edge Finder Double - GROZ Edge and Center Finders are time saving positioning tools for use on jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, center points & scribed lines.
    B569
    Now: CAD $9.99
    Was: $12.99
    Add to Cart
  • OUTSIDE CALIPER 4IN.

    Groz

    OUTSIDE CALIPER 4IN.

    Now: CAD $5.99
    Was: $7.99
    Outside Calipers 4" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B582
    Now: CAD $5.99
    Was: $7.99
    Add to Cart
  • Groz

    INSIDE CALIPER 8IN.

    Now: CAD $9.29
    Was: $13.99
    Inside Calipers 8" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish
    B584
    Now: CAD $9.29
    Was: $13.99
    Add to Cart
  • SPRING DIVIDER 4IN.

    Groz

    SPRING DIVIDER 4IN.

    Now: CAD $5.49
    Was: $7.99
    B580 4" Spring Divider - GROZ This 4" spring divider features polished, natural steel finish legs which are carefully balanced. The centrally adjustment screw can be easily adjusted over the entire range and gives a smooth and precise action. Opens:...
    B580
    Now: CAD $5.49
    Was: $7.99
    Add to Cart
  • STEEL SQUARE 4IN.

    Groz

    STEEL SQUARE 4IN.

    Now: CAD $7.99
    Was: $10.99
    4" Steel Square Made of finest tool steel hardened and tempered. Squares have true right angles, both inside and outside. Beams and blades are ground and lapped for straightness and parallelism.
    B617
    Now: CAD $7.99
    Was: $10.99
    Add to Cart
  • SQUARE 8IN. ALUMINIUM

    SQUARE 8IN. STAINLESS STEEL

    Now: CAD $15.99
    Was: $17.99
    B3096 8" Stainless Steel Square Stainless steel L-square edge is ideal for safe, accurate cutting and measuring. Features graduations in mille meter and inches. Size: 8"
    B3096
    Now: CAD $15.99
    Was: $17.99
    Add to Cart
  • Milescraft

    HINGE BIT 7/64IN. NO. 6 MILESCRAFT

    CAD $7.99
    2315 #6 Hinge Bit - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Size: 7/64" Screw compatibility: #5 & #6
    2315
    CAD $7.99
    Add to Cart
  • MULTI MARK KREG

    Kreg

    MULTI MARK KREG

    Now: CAD $15.99
    Was: $17.50
    Multi Mark - KREG This multi-purpose marking and measuring tool covers a wide variety of household and jobsite applications. This tool works as: 3-Way Adjustable Rule, Imperial and Metric Scale, Compact Design, Layout Tool, Trimming Tool, T-Square,...
    KMA2900
    Now: CAD $15.99
    Was: $17.50
    Pre-Order Now
  • SQUARE CUT SPEED SQUARE KREG

    Kreg

    SQUARE CUT SPEED SQUARE KREG

    CAD $13.99
    Square-Cut - KREG The problem with traditional squares is that while they give you a straight edge, they do nothing to simplify and speed up the process of aligning your saw to your pencil mark. The Kreg's Square-Cut simplifies this process with an...
    KMA2600
    CAD $13.99
    Add to Cart
  • TRAMMEL HEAD SET 4PCS SMALL

    TRAMMEL HEAD SET 4PCS SMALL

    Now: CAD $16.99
    Was: $20.99
    4 pcs Small Trammel Head Set These trammels are useful for laying out the distance between two points and for scribing circles and arcs which is beyond the capacity of ordinary dividers. Clamping device firmly holds the points that can be un-screwed...
    B2821
    Now: CAD $16.99
    Was: $20.99
    Add to Cart
  • V BLOCK 4

    V BLOCK 4

    CAD $42.99
    V-Block - 4" x 2 5/8" x 3 1/2" 2.25 kg. Supples in matched and numbered pairs, these V-Blocks are manufactured from high quality castings properly seasoned against distortion and are accurately machined square and parallel
    B362
    CAD $42.99
    Pre-Order Now
  • ADJUSTABLE DOUBLE SQ. 4IN.

    ADJUSTABLE DOUBLE SQ. 4IN.

    Now: CAD $25.99
    Was: $34.99
    4” Adjustable Double Square The adjustable square is great for getting into areas that fixed squares just can not accommodate. The blade and stock are hardened and precision ground for accuracy, and the blade locks into place with a knurled nut This...
    B26674
    Now: CAD $25.99
    Was: $34.99
    Add to Cart
  • PARALLEL BAR SET 3/16IN.

    PARALLEL BAR SET 3/16IN.

    Now: CAD $47.50
    Was: $59.99
    PRECISION PARALLEL BAR SET Ideal for layout work and setups Matched pairs are hardened and ground Set of 4 pairs come in widths of 1.000",1.250", 1.500" and 1.750". Size 3/16" x 6"
    B727316
    Now: CAD $47.50
    Was: $59.99
    Add to Cart
  • STEEL SQUARE 3IN.

    Groz

    STEEL SQUARE 3IN.

    Now: CAD $8.99
    Was: $10.99
    3" Steel Square Made of finest tool steel hardened and tempered. Squares have true right angles, both inside and outside. Beams and blades are ground and lapped for straightness and parallelism.
    B2116
    Now: CAD $8.99
    Was: $10.99
    Add to Cart
  • Groz

    INSIDE CALIPER 4IN.

    Now: CAD $5.49
    Was: $7.99
    Inside Calipers 4" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish
    B581
    Now: CAD $5.49
    Was: $7.99
    Add to Cart
  • Groz

    SPRING DIVIDER 8IN.

    Now: CAD $9.29
    Was: $13.99
    Spring Calipers 8" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B583
    Now: CAD $9.29
    Was: $13.99
    Add to Cart
  • PROTRACTOR MACHINIST M024

    PROTRACTOR MACHINIST M024

    CAD $6.99
    B1086 8" Round Protractor Stainless steel protractor provides accurate measurements Easy to read etched numbers Locking arms helps prevents measuring mistakes
    B1086
    CAD $6.99
    Add to Cart
  • Milescraft

    HINGE BIT 9/64IN. NO. 8 MILESCRAFT

    CAD $7.99
    2316 #8 Hinge Bit - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Size: 9/64" Screw compatibility: #8 & #10
    2316
    CAD $7.99
    Add to Cart
  • SCRIBER MACHINIST 3 1/2IN.

    Groz

    SCRIBER MACHINIST 3 1/2IN.

    Now: CAD $3.99
    Was: $7.99
    Machinist Scriber 3 1/2" Hardened point. Knurled black oxide finish. 3 1/2" long when retracted. Chrome pocket clip.
    B2112
    Now: CAD $3.99
    Was: $7.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley