Accessories for Lathe Woodturning

No more hurting your back bending down to reach your lathe’s tool rest. Add one of these convenient riser kits to your 18|36 REVO lathe. It raises the lathe a full 3" for taller wood-turners.  This riser kit can even be used in...

Add a nice wheel system to your REVO 18|36 lathe and turn it into a mobile unit. Now you’ll be able to save some precious shop space by moving your lathe out of the way when not in use. The wheel system is designed for maximum stability by allowing...

Experience the best in wood turning with the Chisel Wood Turning 6 PC Set B2351 - a high-quality set of tools that is designed to elevate your craft. Made from durable High Speed Steel and featuring large ash handles and brass ferrules, these chisels are...

Rikon Caster Set for 70-3040 Lathe. These 2-1/2" swivel casters include brackets and hardware to install on the 70-3040 lathe legs. Foot activated pedals raise the lathe about an 1" so the lathe can be easily moved when needed.

Drill Chuck and Arbor with MT2 Taper Features: Great for turning small parts5/8-Inch Maximum openingSolid steel constructionFits all MT2 Taper spindles and tailstocks  

Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The first feature that will catch your attention is undoubtedly the ergonomically angled control panel made from anodized...

REVO 12|16 & 15|24 Headstock L-Bracket - Laguna Tools - ALAREVO1216-LB L-Shaped Bracket mounts on the back of the headstock in hi/low position.

ALAREVO1524 Wheel System, Laguna Tools Revo 15|24 Wheel System. Wheel system allows the lathe to be easily moved around the shop. For use with the Laguna 15|24 Lathe.

Revo 15|24 12" Tool Rest. 12" Tool Rest for Revo 15|24

Laguna Tools 20" Extension pour Revo 15|24 - ALAREVO1524 EXTENSION

Complete Banjo fits Revo 15|24 Hardware included.

Turners Mesh Abrasive Roll Each Turners Mesh Abrasive strip has tiny holes in it to allow the wood particles to pass through. This helps prevent clogging the abrasive surface which makes the strips perfect for sanding projects on your lathe. The...

CX802EXTOutboard Extension for CX802 Wood LatheThis outboard extension can be installed on the cast iron stand of your CX802 wood lathe and used to turn bowls approximately 30".Includes Bed Extension, Banjo, Post, and mounting hardware.

20-inch Cast Extension can be mounted to the right side of the Revo 12/16 lathe to extend the turning length by up to 20 inches. It can also be mounted to the left side of the headstock to permit outboard turning. Comes with mounting hardware included...

110V Halogen light with built-in transformer. Dust-Proof Ribbed Aluminum Case swivels 320° & features a bright, glare-free floodlight. The Revo 18|36 comes standard with two pre-drilled brackets that allow users to install dual lights without...

Extend your turning abilities of your lathe with this 10" Outboard Table and Banjo for the Laguna Revo 1216 lathe. This cast iron bed extension includes tool rest extension and spindle adaptor with LH, RH 1" x 8" TPI. Tool rest pictured not included...

Turners often need to work through various grits of abrasive when getting a project ready for finish. This sanding pack is a convenient way to have all the abrasives you need at hand. The cloth-backed 1" wide strips are perfect for matching the turned...

13-1/2” Bed Extension for 70-150VSR. For use with 70-150VSR, 70-220VSR, and 70-1420VSR Features: Made of heavy cast ironMachined bed matches the 70-150VSR lathe for easy sliding of the tailstock for long spindlesBoth ends of the bed extension...

Increase the turning capacity of you CX814 wood lathe by 24” with the CX814EXT extension. Also finished in the same ultra durable hammer tone finish making this a great pairing for you lathe. Turning capacity with extension installed on your CX814...

specifically for the OneWay Stronghold chuck (2137)Adapter fits spindles sized 1" 8TPI

Specifically for the OneWay Stronghold chuck (2137)Adapter fits spindles sized 1.25" 8TPI

2286 Your ONEWAY Buffing system is an effective method for finely polishing wood. This Buffing Kit contains everything you need to make an existing finish look glossier and feel smoother than ever before. Give your projects the smooth glossy finish they...

B2882INS4 Turning WNMG inserts for Boring Bar 4 pc Set. Insert for Boring Bar, Model B2882

B316 8pc Woodturning Chisel Set Quality wood lathe chisel set at a great price! This set includes 8 essential chisels used for turning spindles, pens, bowls and other projects. The 4-1/4" blade is made of high carbon steel, giving years of use and the...

B2817P14 4pc Carbide Insert

CX813EXT 22" Bed Extension for CX813 - Craftex CX-Series Bed Extension for CX813 Mini Wood Lathe The CX813 can be extended another 22" by installing this bed extension

410 Sand Master - ROBERT SORBY To put a fine finish on turning work and eliminate sanding lines. Velcro 2" sponge pad mounted on phosphor bronze bearing gives excellent service. Total Length: 11-1/2" Handle: 8-1/2"

Steady Rest For Wood Lathe Solid cast iron 1 1/2" base plate 3/4" sealed ball bearings Capacity: 3 1/2" approx. Suitable for 12" and 14" lathes

Optional sleeve For B1812 "One Way" Chuck 1 1/4" x 8 TPI Made in Canada

Optional sleeve For B1812 "One Way" Chuck 1" x 8 TPI Made in Canada