Circular Saw Blades

8-1/4 in. Circular Saw Blades are ideal for any wood-cutting application. The exclusive, patent-pending ToughTrack™ tooth design, on our framing & ripping blades, is engineered to deliver straight, accurate cuts over the life of the blade...

DEWALT Saw Blades are ideal for any wood-cutting application. The exclusive, \n patent-pending ToughTrack™ tooth design, on our framing & ripping blades, is engineered to deliver straight, accurate cuts over the life of the blade. Patented Body...

BULK DISCOUNT: Buy 2 + for only $8.99/each. Promotion ends March 16th, 2024 Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 8" Teeth: 40 ATB (Alternate Top Bevel Grind) Arbor: 5/8"...

The LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways...

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The...

This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may...

The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywood, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features...

Diablo's 4-1/2" Cordless Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the...

The Cuz-D 8-1/2" x 40 Tooth Carbide Tipped Blade is a finer cutting blade specifically manufactured for the Cuz-D Straight Flush Cut Saw. This blade is designed to be used with plywood and other wood sheet goods. The patented arbor system eliminates...

The Cuz-D 28 Tooth General Purpose Blade has a patented arbor system that allows the arbor surface to be recessed inside the outer blade surface allowing for the zero clearance flush cutting capacity. The arbor system also features a 6 sided, non-slip...

The Cuz-D 8-1/2" x 20 Tooth Carbide Tipped Blade is a demolition and rough cutting wood blade specifically manufactured for the Cuz-D Straight Flush Cut Saw. The patented arbor system eliminates slippage when you put the saw to work on the most demanding...

D0748CFX Diablo's new Steel Demon Cermet saw blade series is redefining metal cutting, and the jobsite, by introducing safer, exclusive innovation that allows users to cut both mild and stainless steels for up to 40X longer life versus standard...

The Avanti 7-1/4 in. x 24-Tooth Framing Circular Saw Blade is an economical, high-performance blade that can be sharpened when needed to extend its service life. The high-quality steel is manufactured with carbide and lasts up to 30 times longer than...

B3593 3pc 4-1/2" Diamond Blade Set This 3pc kit is ideal for cutting tiles made of Granite, Marble, Ceramics, concrete & other similar material. Fits all Angle grinders with a 7/8" arbor. Blades are made of high quality diamond steel and they can...

D0840S 8-1/2" 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8" Arbor Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the...

D1050X 10" 50 Tooth Combination Saw Blade The Diablo 10" x 50 tooth combination circular saw blade features TiCo high-density carbide construction to provide a long-lasting blade life. Laser-cut stabilizer vents help limit vibrations for precise...

D1260X 12", 60 Teeth 1" Arbor Combination Saw Blade The Diablo 12", 44 Tooth General Purpose Saw Blade is made of durable micro-grain titanium carbide for a design that is durable, razor sharp and long-lasting. The tri-metal shock resistant brazing...

D12100X 12", 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood and Wood Composites For use with miter saws Shear-face grind design delivers effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool...

D1090X 10" Ultra Fine 90 Teeth Circular Saw Blade for Wood and Wood Composites For use with miter or table saws Carbide construction Ultra-thin kerf design for easy cuts Shear-face grind design delivers effortless cuts with a reduced amp draw on...

D1060X 10", 60 Tooth ATB Fine Finish Saw Blade with 5/8" Arbor Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish Super thin laser cut kerf gives extremely fast, durable, and clean cuts Non-Stick Perma-Shield...

D1040X 10", 40-Tooth ATB General Purpose Saw Blade with 5/8" Arbor Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut...

D1024X 10", 24-Tooth ATB Ripping Saw Blade Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight Durable...

D0860S 8-1/2" x 60 Tooth Fine Finishing Miter Saw Blade Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish Super thin laser cut kerf gives extremely fast, durable, and clean cuts Laser-cut stabilizer vents trap...

D0740A 7-1/4" x 40 Tooth ATB Finishing Saw Blade with 5/8" and Diamond Knockout Arbor Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp Laser cut heat expansion slots allow blade to expand due to heat build-up...

DD208H 8" x 12Tooth Stacked Dado Saw Blade Set Designed to fit 5/8" laser cut arbors for accurate blade rotation Cut, rip and dado wood cleanly and accurately Micro-grain titanium carbide for durability and precise cuts Perma-Shield non-stick coating...