Milling Accessories

Milling Accessories

  • E.M. HOLDER MT 3 1/2

    E.M. HOLDER MT 3 1/2

    Now: CAD $24.99
    Was: $33.99
    Morse Taper End Mill Holder - Taper: 3, size «" For Weldon Shank End mills Precision ground and hardened to 50 RC concentric with .0006" All morse taper holders are threaded for 3/8" - 16 Drawbar
    415435
    Now: CAD $24.99
    Was: $33.99
    Add to Cart
  • TUBE CENTRE MT3

    TUBE CENTRE MT3

    CAD $129.00
    Tubing Center This well constructed tubing center is ideal for hollow work pieces like pipes & tubing. With sealed ball bearing you don't have to worry about dust getting in. MT3 Large Diameter: 3" Small Diameter: 3/4"
    B2829
    CAD $129.00
    Add to Cart
  • END MILL 2IN. WITH 3 CARBIDE INSERTS R8

    END MILL 2IN. WITH 3 CARBIDE INSERTS R8

    CAD $109.00
    End Mill with Carbide Insert - R8 Arbor This 2" end mill comes with 3 carbide inserts. It is excellent for facing off excessive material quickly, leaving a smooth and even finish. A Must for Any Machine Shop|
    B2136R8
    CAD $109.00
    Add to Cart
  • FLY CUTTER 1/2IN. SET

    FLY CUTTER 1/2IN. SET

    CAD $25.99
    Fly Cutter Set Top Quality Counter balanced Made of hardened steel Uses standard tool-bits Shank Dia.: 1/2" Includes Head Dia.: 3/4", 1 1/8", 1 1/2" Standard Tool Bit Size: 3/16", 1/4", 5/16"
    B090
    CAD $25.99
    Add to Cart
  • STUB ARBOR MT 2 X 1IN.

    Groz

    STUB ARBOR MT 2 X 1IN.

    CAD $14.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B460
    CAD $14.99
    Add to Cart
  • END MILL HOLDER 1/2IN. R8

    END MILL HOLDER 1/2IN. R8

    Now: CAD $20.99
    Was: $23.99
    R8 End Mill Holders - 1/2" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B156
    Now: CAD $20.99
    Was: $23.99
    Add to Cart
  • NUT T SLOT 3/8 16 4PC/PKT

    NUT T SLOT 3/8 16 4PC/PKT

    CAD $5.99
    Heat Treated Black Oxide Finished 4pc Sets T-Slot Nuts Size: 3/8" - 16 NC Imperfect thread in base to prevent damage to table slot
    B230238
    CAD $5.99
    Add to Cart
  • COOLANT PUMP FOR METAL WORKING MACH. CSA

    COOLANT PUMP FOR METAL WORKING MACH. CSA B3087

    Now: CAD $249.00
    Was: $299.00
    B3087 Coolant Pump System with Magnetic Base The B3087 Coolant Pump System can be used with any metal cutting machine for reduced tool wear, efficient cutting and better finishes. The coolant pump has a maximum capacity of 5 gallons and comes with...
    B3087
    Now: CAD $249.00
    Was: $299.00
    Add to Cart
  • END MILL HOLDER 3/8IN. R8

    END MILL HOLDER 3/8IN. R8

    Now: CAD $20.99
    Was: $24.99
    R8 End Mill Holders - 3/8" for Weldon Shank End Mills Made from high quality heat-treated steel Drawbar: 7/16" - 20 TPI
    B155
    Now: CAD $20.99
    Was: $24.99
    Add to Cart
  • BORING HEAD SET 3/8IN. W/R8 ARBOR AND CUTTER

    BORING HEAD SET 3/8IN. W/R8 ARBOR AND CUTTER

    Now: CAD $125.00
    Was: $155.00
    Boring Head Rugged construction for chatter-free boring and accuracy Bar holder moves freely and smoothly. When locked in place it holds firmly against tool-cutting pressures Micrometer lead-screw provides .001" direct reading accuracy With R8 arbor and...
    B2552
    Now: CAD $125.00
    Was: $155.00
    Add to Cart
  • END MILL 10PC SET HSS 4FLT

    END MILL 10PC SET HSS 4FLT

    CAD $109.00
    10 PC. Set End Mills – 4 Flute - H.S.S Size: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16". & 3/4" Includes: Wood Case
    B2156
    CAD $109.00
    Add to Cart
  • END MILL 20PC SET TITANIUM COATED METRIC

    END MILL 20PC SET TITANIUM COATED METRIC

    Now: CAD $175.00
    Was: $199.00
    End Mills 20pc Set - Metric Excellent performance in hard materials that are difficult to cut. High productivity with long tool life. Sizes in 2 flutes: 20, 16, 14, 12, 10, 8, 6, 5, 4, 3mm In 4 flutes - same as 2 flutes
    B1890M
    Now: CAD $175.00
    Was: $199.00
    Add to Cart
  • MILLING VISE LOW PROFILE 1 7/8IN.

    MILLING VISE LOW PROFILE 1 7/8IN.

    Now: CAD $79.99
    Was: $109.00
    B2715 Precision Tool Makers Vise This high precision toolmakers vise is manufactured from hardened 55-60 HRC tool steel & is high precision ground. The vise has recessed pockets at both ends for clamping. Ideal for milling machines and mini mills like...
    B2715
    Now: CAD $79.99
    Was: $109.00
    Add to Cart
  • END MILL HOLDER 1IN. R8

    END MILL HOLDER 1IN. R8

    Now: CAD $32.99
    Was: $37.99
    R8 End Mill Holders - 1" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B160
    Now: CAD $32.99
    Was: $37.99
    Add to Cart
  • 1 2 3 BLOCK

    1 2 3 BLOCK

    CAD $25.99
    Precision Ground 1-2-3 Blocks A must for a good machine shop Very handy for precision layout work| Hardened and ground surface. Blocks are matched to .0001" per inch Measures: 1" x 2" x 3"
    B653
    CAD $25.99
    Add to Cart
  • SLITTING SAW 2 X 1/16

    SLITTING SAW 2 X 1/16

    CAD $16.99
    T747005 2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2" Thickness: 1/16"
    T747005
    CAD $16.99
    Add to Cart
  • SLEEVE MT2/MT1

    SLEEVE MT2/MT1

    CAD $8.99
    R8 And Morse Taper Sleeves - From MT2 to MT1 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT2 to MT1
    B343
    CAD $8.99
    Add to Cart
  • SLITTING SAW 2 1/2 X 1/32

    SLITTING SAW 2 1/2 X 1/32

    CAD $17.99
    T747015 2-1/2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2-1/2" Thickness: 1/32"
    T747015
    CAD $17.99
    Add to Cart
  • END MILL HOLDER 3/4IN. R8

    END MILL HOLDER 3/4IN. R8

    Now: CAD $29.99
    Was: $34.99
    R8 End Mill Holders - 3/4" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B158
    Now: CAD $29.99
    Was: $34.99
    Add to Cart
  • END MILL 20PC TITANIUM COATED IMPERIAL

    END MILL 20PC TITANIUM COATED IMPERIAL

    Now: CAD $175.00
    Was: $199.00
    End Mills 20pc Set - Inches Excellent performance in hard materials that are difficult to cut. High productivity with long tool life. Sizes in 2 flutes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", & 3/4" In 4 flutes - same as 2...
    B1890
    Now: CAD $175.00
    Was: $199.00
    Add to Cart
  • END MILL 10PC SET HSS 2FLT

    END MILL 10PC SET HSS 2FLT

    CAD $99.00
    10pc Set End Mills - H.S.S. - 2 flutes Size: 3/16", 1/4", 5/16", 3/8", 7/16", 11/2", 9/16", 5/8", 11/16". & 3/4" Includes: Wood Case
    B2155
    CAD $99.00
    Add to Cart
  • RAPID INDEXER 6IN. BASE WITH 3 JAW CHUCK

    RAPID INDEXER 6IN. BASE WITH 3 JAW CHUCK

    Now: CAD $269.00
    Was: $299.00
    RAPID INDEXER 3 Jaw Chuck 3 3/16" Useful for 2 direction horizontal & vertical milling & drilling operations. It has a 3 jaw chuck fitted on the head for big range clamping. The indexer has a simple rapid operation with dividual number 24 - notch (15...
    B2725
    Now: CAD $269.00
    Was: $299.00
    Add to Cart
  • CLAMPING KIT 3/8IN. 52 PCS

    CLAMPING KIT 3/8IN. 52 PCS

    Now: CAD $69.99
    Was: $105.00
    B200 Clamping Kits 52 Piece set with wall hanging rack 1" Wide blocks Tool Steel, forged and hardened 3/8" x 16NC studs TNuts fit 1/2" table slots Weight: 6.20 Kg T-Nut Size Overall Width: 0.857" Base Height: 0.290" Overall Height: 0.570" Table Slot...
    B200
    Now: CAD $69.99
    Was: $105.00
    Add to Cart
  • END MILL 2IN. WITH 3 CARBIDE INSERT MT3

    END MILL 2IN. WITH 3 CARBIDE INSERT MT3

    CAD $109.00
    End Mill with Carbide Insert - MT Arbor This 2" end mill comes with 3 carbide inserts. Excellent for facing off excess material quickly, leaving a smooth and even finish. A Must For Any Workshop|
    B2136MT3
    CAD $109.00
    Pre-Order Now
  • CLAMPING KIT 1/2IN. 52 PCS

    CLAMPING KIT 1/2IN. 52 PCS

    Now: CAD $85.00
    Was: $103.99
    Clamping Kits 52 Piece set with wall hanging rack 1" Wide blocks Tool Steel, forged and hardened 1/2" x 13NC studs TNuts fit 5/8" table slots Weight: 11kg T-Nut Size Overall Width: 0.989" Base Height: 0.337" Overall Height: 0.625" Table Slot Width: 0...
    B054
    Now: CAD $85.00
    Was: $103.99
    Add to Cart
  • MACHINIST JACK 1000 LB

    MACHINIST JACK 1000 LB

    CAD $9.99
    Machinist Jack For use any place where leveling is necessary Lifting capacity of approximately 1000 lbs. 1" adjustment 4" high when maximum
    B2297
    CAD $9.99
    Add to Cart
  • SLEEVE MT3/MT2

    SLEEVE MT3/MT2

    CAD $8.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT3 to MT2
    B342
    CAD $8.99
    Add to Cart
  • CLAMPING KIT METRIC M10

    CLAMPING KIT METRIC M10

    Now: CAD $69.99
    Was: $105.00
    Metric Clamping Kit M10 M200 is perfect for any shop. It includes 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts and 6 end hold-downs. All pieces are metal hardened and the rack can be hanged on the wall for easy access. Studs:...
    B200M
    Now: CAD $69.99
    Was: $105.00
    Add to Cart
  • CLAMPING KIT FOR B2424

    CLAMPING KIT FOR B2424 B2424KIT

    CAD $20.99
    B2424KIT Clamping Kit for B2424 Rotary Table This clamping kit is consisting of two strap clamps, two step blocks, two 2-1/8" (55mm) long bolts, 12mm square T-nuts and two nuts.
    B2424KIT
    CAD $20.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley