The definitive midi-lathe, Laguna’s REVO 12|16 encapsulates the prestige of Laguna in a small package. Featuring a Pulse Width Modulation system motor to maintain consistent torque at any speed, one step cam-action belt change with magnetic door housing, and a luxury banjo w/45º chamfered edge. The 1216 controls the 1hp DC motor using pulse width modulation. A big problem with DC motor control is torque at low speeds, and you will find many MIDI lathes with the lowest speed of 250RPM and higher because of this. This is because the cost effect controllers introduce resistance into the voltage to limit the power, which reduces the speed but also reduces the torque at the same rate. PWM will deliver full torque across the entire speed range. This allows for tremendous torque at low speeds which is helpful when roughing and precision work. This also allows for outboard turning up to a 16” bowl on a mid-sized lathe.
FEATURES:
24 Positions Index System with Lock & Transparent Window. Electronic Variable Speed & RPM Digital Read Out (DRO). Pulse Width Modulation (PWM) Motor Control Hardened 1045 Steel Tool Rest Leading Edge Luxury Banjo with 45° Chamfered Edge. Live & Drive Center On-Board Storage Forward & Reverse Spindle Rotation 1" REVO Compatible Tool Rest Post ACME Lead Screw in Tailstock Drive Center Knock-out Rod Live Center & Drive Center Oversized Handle Stops Solid 3-1/2" Metal Brake Magnetic Door Latches Tool-less Belt Change Faceplate Wrench 3" Faceplate
Specifications:
Motor: 1 HP DC Permanent Magnet Motor Controller: Pulse Width Modulation (PWM) Electrical Requirements: 110V-1PH-60HZ Recommended Breaker Size: 110V - 15 AMP Speed Range High 650 - 3500 RPM Speed Range Mid 325 - 1750 RPM Speed Range Low 50 - 525 RPM Distance Between Centers 15.5" (394mm) Swing Over Bed 12-1/2"(318mm) Swing Over Banjo 9-1/2"(241mm) Max. Outboard Swing 16" (406.4mm) Spindle Bore 3/8"(9.5mm) Spindle Taper MT2 Spindle Thread 1"x 8 TPI (both ends) Front Bearing 6006LLU Rear Bearing 6005LLU Indexing 24 positions w/ Lock Drive belt Poly-Belt 6 Grooves Tail stock quill travel 2-1/2"(63.5mm) Tail stock taper MT2 Overall Size L29.4" W8.9" H17.4"(746.8mm, 226mm, 442mm) Floor to bed height 6.7" (170mm) no pads Floor to Spindle Center 13" (328.75mm) no pads Bed Length 29.4" (746.8mm) Tool Rest Length 6" (152.4mm) Tool Rest Post Dia. 1" (25.4mm) Faceplate Dia. 3" (76.2mm) Certification CSA C/US 256540 Net Weight 118LB (53.5KG) Shipping Weight 125LB (56.7KG) Shipping Dimensions L35.8" W14.6" H20.5"