Description
The Spray Station 5500 is a semi-pro unit designed for light contractor and serious woodworking enthusiasts. The professional gun and the powerful turbine make the Spray Station 5500 a perfect tool to achieve that showroom finish on cabinets, furniture and more. For contractors, interior or exterior trim, doors, shutters and many other small to medium size jobs can be completed faster using less material in the process.
The pro-gun features a fast "Push N Click" 3 spray pattern changing system, paint volume control dial and a dynamic control action trigger. You can complete a multitude of projects with a large variety of materials including thinned latex, lacquers, urethanes, varnishes, oils, shellacs, stains, sealers, enamels, glazes and many more.
Features:
650 watt turbine motor provides powerful performance
13 ft. hose and 5.5 ft. power cord to easily move around large projects
Features on-board storage for the pro spray gun, hose and cord
Includes:
Carry handle for easy portability
Comes complete with a 2.0mm stainless steel tip and needle and a 1 qt. PTFE coated paint container, for faster clean-up & quick release lever
Backed by a 2 year warranty
1 Review
-
Great value
I have not used an HVLP sprayer before and for that matter I have not used many sprayers at all. I was able to get "onto" the operation of the 5500 quite quickly and it really did a great job spraying latex paint on a wall unit I am building. Just a couple of little things that I modified. The air intake and filter is right on the bottom of the turbine. I added another "bottom to the unit with 1/4 ply with 1/4 feet to protect the intake filter from plugging up with floor dirt and debris ( either from the shop floor or the ground if spryaing outside. On the material volume adjuster knob I engraved a reference line to aid in the counting of revolutions and helping the repeatablity of settings. Be very carefull to insert and slightly twist the turbine hoses so they don't come out of the units when under pressure. I had it happen several times after the hose warmed up and became a little more flexible. I have had no trouble since I started double checking the firmness of fit. I found it a great asset to have a radio signal remote control switch so I can turn the machine on and off without bending down all the time to hit the swich on the turbine unit.
