Description
CX803
14" x 43", 3/4HP Wood Lathe - Craftex CX-Series
Equipped with a 3/4 HP motor, this 14" x 43" wood lathe can swing 14" over bed and features variable spindle speed ranges from 600 to 2400 RPM. The 43" distance between the centers and the variable speed gives you the flexibility for any project and the solid cant iron bed construction dampens any stock vibration, resulting in greater precision.
Other features of the CX803 include a digital RPM display, MT2 spindle table, 6" face plate, cast iron stand and cast iron tailstock.
SPECIFICATION
Motor: 3/4HP, 120V, Single Phase
Number of Speeds: Variable Speed
Spindle Taper: MT2
Spindle Size: 1" x 8 TPI
Swing Over Bed: 14" (355mm)
Distance Between Centers: 43" (1100mm)
Spindle Speed Ranges: Variable, 600 - 2400 RPM
Tailstock Taper: MT2
Tailstock Spindle Travel: 2-1/4" (57mm)
Faceplate Size: 6" (152mm)
Bed Construction: Precision Ground Cast Iron
Stand Construction: Cast Iron
Headstock Construction: Cast Iron
Tailstock Construction: Cast Iron
Digital RPM Display: Yes
Overall Length: 63" (1600mm)
Approx Weight: 281 lbs (128 Kg)
Warranty: 3 Years
10 Reviews
-
CX803 Lathe
I really like this lathe, but it did come with damage of the paint around the screw insert holes for the legs. It had sizable chunks of paint removed from 2 holes with scrapes above as well. Other then that, very stable base and great versatility.
-
WOOD LATHE WITH DIGITAL READOUT CSA CX803
Good Lathe
-
CX803 Lathe
I've had this lathe for about a month, so far it's seems to be very well built, replaced old Rockwell spindle lathe. love the variable speed. It's heavy and does not vibrate too much at all. Will update as I get more time on it.
-
Quality of product
Good value for money. Smooth from the start.
-
CX803 Wood Lathe
This is a solid built machine for the price. I like mine a lot. I do a thorough review on my YouTube channel MFCP Woodworking. My only complaint is that the headstock has a slot for the wrenches so you have to use the flimsy wrenches supplied. I'm considering grinding the slots wider so that I can use a real wrench.
-
WOOD LATHE WITH DIGITAL READOUT CSA CX803
In general, Lathe runs very well. The boltt holding the tool rest requires a double nut. It loosens if you change set-up or locations. Everything else works very well.
-
Wood lathe
Excellent lathe. Works great. Why buy used, get a reliable machine, built sturdy.
-
great
This is the perfect lathe for the Hobby-Woodworker
-
So quiet, I wasn't sure it was running! but...
I purchased this lathe a few weeks ago. It is definitely a quiet lathe. The centres lined up perfectly. Nearly vibration free. The only problems I see is the handle to tighten the tool rest tends to slip and not tighten enough. Other than that, the quality of the machine is good. If I were to change anything, it would be flipping the motor to the other side of the head-stock. Having the motor where it is, was a hindrance for me. I purchased a universal duplicator from Viel Tools in Quebec (100% Canadian made, which is nice.) It fit, but, The support rail for the duplicator on the head-stock side would barely fit under the motor. And because the duplicator was made for a 10" swing, you had to add a 1" spacer under the support rail, but, because the motor is where it is, you cannot use the spacer. I needed to make an aluminum block with a slot and a drill and tap a hole and place it on the duplicator carriage to accomodate the 14" swing of this lathe. It's all working beautifully now though. Just a little modification that could've been avoided had the motor been flipped to the other end of the head-stock.
