null

Accessories for Lathe Woodturning

Accessories for Lathe Woodturning

  • LAGUNA 3IN. RISER BLOCK FOR REVO1836

    Laguna

    LAGUNA 3IN. RISER BLOCK FOR REVO1836

    CAD $399.00
    No more hurting your back bending down to reach your lathe’s tool rest. Add one of these convenient riser kits to your 18|36 REVO lathe. It raises the lathe a full 3" for taller wood-turners.  This riser kit can even be used in...
    ALAREVO183
    CAD $399.00
    Pre-Order Now
  • LAGUNA WHEEL SYSTEM FOR REVO 1836

    Laguna

    LAGUNA WHEEL SYSTEM FOR REVO 1836

    CAD $699.00
    Add a nice wheel system to your REVO 18|36 lathe and turn it into a mobile unit. Now you’ll be able to save some precious shop space by moving your lathe out of the way when not in use. The wheel system is designed for maximum stability by allowing...
    ALAREVO18WS
    CAD $699.00
    Pre-Order Now
  • CHISEL WOOD TURNING 6 PC SET

    CHISEL WOOD TURNING 6 PC SET B2351

    Now: CAD $89.99
    Was: $169.00
    6pc Deluxe Lathe Turning Tools High Speed Steel Large ash handles Brass ferrules Includes: 3/16" x 13/16" Parting tool -17" long 13/16" Round nose scraper - 17" long 7/16" Gouge - 17" long 1 1/8" Skew - 19" long 1" Gouge - 19" long 1/2" Gouge - 22 1/2"...
    B2351
    Now: CAD $89.99
    Was: $169.00
    Add to Cart
  • MOBILITY CASTER SET FOR 70 3040 RIKON

    Rikon

    MOBILITY CASTER SET FOR 70 3040 RIKON

    CAD $289.99
    Rikon Caster Set for 70-3040 Lathe. These 2-1/2" swivel casters include brackets and hardware to install on the 70-3040 lathe legs. Foot activated pedals raise the lathe about an 1" so the lathe can be easily moved when needed.
    70971
    CAD $289.99
    Add to Cart
  • LAGUNA REVO 18 X 36 LATHE 110V

    Laguna

    LAGUNA REVO 18 X 36 LATHE 110V

    CAD $3,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The first feature that will catch your attention is undoubtedly the ergonomically angled control panel made from anodized...
    MLAREVO18361
    CAD $3,999.00
    Pre-Order Now
  • LAGUNA REVO 1524 WHEEL SYSTEM

    Laguna

    LAGUNA REVO 1524 WHEEL SYSTEM

    CAD $299.00
    ALAREVO1524 Wheel System, Laguna Tools Revo 15|24 Wheel System. Wheel system allows the lathe to be easily moved around the shop. For use with the Laguna 15|24 Lathe.
    ALAREVO1524W
    CAD $299.00
    Pre-Order Now
  • TURNERS MESH SANDING PACK

    TURNERS MESH SANDING PACK

    Now: CAD $39.99
    Was: $44.99
    Turners Mesh Abrasive Roll Each Turners Mesh Abrasive strip has tiny holes in it to allow the wood particles to pass through. This helps prevent clogging the abrasive surface which makes the strips perfect for sanding projects on your lathe. The...
    B4157
    Now: CAD $39.99
    Was: $44.99
    Add to Cart
  • OUTBOARD EXTENSION FOR CX802

    Craftex CX Series

    OUTBOARD EXTENSION FOR CX802

    CAD $159.00
    CX802EXTOutboard Extension for CX802 Wood LatheThis outboard extension can be installed on the cast iron stand of your CX802 wood lathe and used to turn bowls approximately 30".Includes Bed Extension, Banjo, Post, and mounting hardware.
    CX802EXT
    CAD $159.00
    Add to Cart
  • LAGUNA 20 INCH BED EXTENSION REVO 1216 L

    Laguna

    LAGUNA 20 INCH BED EXTENSION REVO 1216 L

    CAD $250.00
    20-inch Cast Extension can be mounted to the right side of the Revo 12/16 lathe to extend the turning length by up to 20 inches. It can also be mounted to the left side of the headstock to permit outboard turning. Comes with mounting hardware included...
    ALAREVO20EXT
    CAD $250.00
    Add to Cart
  • LAGUNA HALOGEN LIGHT DOUBLE ARM

    Laguna

    LAGUNA HALOGEN LIGHT DOUBLE ARM

    CAD $219.00
    110V Halogen light with built-in transformer. Dust-Proof Ribbed Aluminum Case swivels 320° & features a bright, glare-free floodlight. The Revo 18|36 comes standard with two pre-drilled brackets that allow users to install dual lights without...
    ALAREVO18LIG
    CAD $219.00
    Add to Cart
  • LAGUNA OUTBOARD 10 INCH C/W TOOL REST EX

    Laguna

    LAGUNA OUTBOARD 10 INCH C/W TOOL REST EX

    CAD $225.00
    Extend your turning abilities of your lathe with this 10" Outboard Table and Banjo for the Laguna Revo 1216 lathe. This cast iron bed extension includes tool rest extension and spindle adaptor with LH, RH 1" x 8" TPI. Tool rest pictured not included...
    ALAREVO12EXT
    CAD $225.00
    Add to Cart
  • SANDING PACK 4PC SET TURNERS 1IN. X 20FT

    SANDING PACK 4PC SET TURNERS 1IN. X 20FT

    Now: CAD $19.99
    Was: $24.99
    Turners often need to work through various grits of abrasive when getting a project ready for finish. This sanding pack is a convenient way to have all the abrasives you need at hand. The cloth-backed 1" wide strips are perfect for matching the turned...
    B2414
    Now: CAD $19.99
    Was: $24.99
    Add to Cart
  • BED EXTENSION FOR 70150VSR RIKON LATHE

    Rikon

    BED EXTENSION FOR 70150VSR RIKON LATHE

    CAD $99.99
    13-1/2” Bed Extension for 70-150VSR. For use with 70-150VSR, 70-220VSR, and 70-1420VSR Features: Made of heavy cast ironMachined bed matches the 70-150VSR lathe for easy sliding of the tailstock for long spindlesBoth ends of the bed extension...
    70903
    CAD $99.99
  • BED EXTENTION FOR WOODLATHE CX814

    Craftex CX Series

    BED EXTENTION FOR WOODLATHE CX814

    CAD $179.00
    Increase the turning capacity of you CX814 wood lathe by 24” with the CX814EXT extension. Also finished in the same ultra durable hammer tone finish making this a great pairing for you lathe. Turning capacity with extension installed on your CX814...
    CX814EXT
    CAD $179.00
    Add to Cart
  • CHISEL SET 8 PC WOODTURNING

    CHISEL SET 8 PC WOODTURNING

    Now: CAD $16.99
    Was: $34.99
    B316 8pc Woodturning Chisel Set Quality wood lathe chisel set at a great price! This set includes 8 essential chisels used for turning spindles, pens, bowls and other projects. The 4-1/4" blade is made of high carbon steel, giving years of use and the...
    B316
    Now: CAD $16.99
    Was: $34.99
    Add to Cart
  • BED EXTENTION FOR MINI WOODLATHE CX 813

    Craftex CX Series

    BED EXTENTION FOR MINI WOODLATHE CX 813

    CAD $105.00
    CX813EXT 22" Bed Extension for CX813 - Craftex CX-Series Bed Extension for CX813 Mini Wood Lathe The CX813 can be extended another 22" by installing this bed extension
    CX813EXT
    CAD $105.00
    Add to Cart
  • EXTENSION FOR CX801 BENCH TOP LATHE

    Craftex CX Series

    EXTENSION FOR CX801 BENCH TOP LATHE

    Now: CAD $159.00
    Was: $179.00
    CX801EXT Extension for CX801 Benchtop Lathe This extension table extends the distance between the centers of the lathe up to 38" giving you a full size lathe. Made of solid cast iron for heavy duty and stable control while turning. A great addition for...
    CX801EXT
    Now: CAD $159.00
    Was: $179.00
    Add to Cart
  • SAND MASTER 11 1/2IN. OA LENGTH SORBY

    SAND MASTER 11 1/2IN. OA LENGTH SORBY

    Now: CAD $74.99
    Was: $105.00
    410 Sand Master - ROBERT SORBY To put a fine finish on turning work and eliminate sanding lines. Velcro 2" sponge pad mounted on phosphor bronze bearing gives excellent service. Total Length: 11-1/2" Handle: 8-1/2"
    410
    Now: CAD $74.99
    Was: $105.00
    Add to Cart
  • SLEEVE 7/8IN. X 14TPI FOR B042 AND B124

    SLEEVE 7/8IN. X 14TPI FOR B042 AND B124

    Now: CAD $6.99
    Was: $8.99
    Wood Lathe Chucks and Face Plate - 7/8" x 14 TPI These chucks and face plate are specially designed for all popular wood lathes They are unthreaded and require a threaded sleeve to fit your particular spindle. YOU MUST THEREFORE ORDER BOTH PARTS TO HAVE...
    Clearance
    SLV078
    Now: CAD $6.99
    Was: $8.99
    Add to Cart
  • STEADY REST FOR WOOD LATHE

    STEADY REST FOR WOOD LATHE

    CAD $69.99
    Steady Rest For Wood Lathe Solid cast iron 1 1/2" base plate 3/4" sealed ball bearings Capacity: 3 1/2" approx. Suitable for 12" and 14" lathes
    B2439
    CAD $69.99
    Add to Cart
  • SLEEVE 1IN. X 8 TPI ONE WAY

    ONEWAY

    SLEEVE 1IN. X 8 TPI ONE WAY

    Now: CAD $23.99
    Was: $29.99
    Optional sleeve For B1812 "One Way" Chuck 1" x 8 TPI Made in Canada
    Clearance
    B1821108
    Now: CAD $23.99
    Was: $29.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley