This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount.

This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount.

32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled holes.

Designed and modeled after the popular Bessey GTR16S6H Guide Rail & Table Clamp, our new clamp is perfect for secure & rapid fastening of guide rails from Festool, Makita, DeWalt, Hitachi, Metabo & other popular tracks. Compare versus Bessey GTR16S6H at $39.

6' Left reading tape L-R.

1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing, it can be used anywhere.

1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing, it can be used anywhere.

Hold Down Clamp for B2935 Drill Press Table With a capacity of 1-1/2", this hold down clamp holds down the work-piece tight to the table and helps to drill accurate holes. Capacity: 1-1/2".

Simple, easy to use design. Excellent holding power. Easily secured to channels in underside of Accu-Cut track and Starting Block. Durable molded construction.

Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs.

Features: Aluminum construction with built in scale and fully adjustable Backside stop to hold wood in place Can be assembled for either left or right hand use. 3" taper per foot with overall length is generous 24" Use with your rip fence to cut tapers up to 15 degrees Specifications: Construction: Aluminum Taper per Foot: 3" Jig Length: 24" Max Taper: 15°.

36" Aluminum Miter Track that works with standard 3/4" x 3/8" miter gauges with or without T-slot. Slides into miter track or miter slot on your table saw and can be used on table saw extensions, drill press tables & band saw tables.

INCRA MITER SLIDER 24" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners.

INCRA MITER SLIDER 18" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners.

36" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs.

Self Adhesive Tapes 6' Right reading tape R-L.

KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw blade.

Lengths of INCRA Track fence without the incremental Shop Stop are an inexpensive way to add a sturdy, basic fence to jigs or miter gauges, but they're also ideal for expanding an existing INCRA Track installation when you don't need an additional Shop Stop. Available in 18", 36", and 52" lengths, these universal fences will easily attach to nearly any horizontal or vertical surface using a wide variety of mounting holes and T-slots.

MATCHFIT Dovetail Clamp is a versatile approach to achieving clamping pressure in hard to reach or limited access places, taper jigs, fence extensions, set-ups which allow for building straight-line rip guides, custom track systems, and many other new ways to affix jigs in the shop that you can imagine. Eliminate the need for expensive and time-consuming T-Tracks.

Angled jaw set provides inward/downward pressure. Easy to setup and slides along on tracks and leaves top of your project unobstructed.