2-pc Universal Fence Clamps Shop made auxiliary fences have never been so easy to hold. These 2-pc Universal Fence Clamps allow holding 3" to 4-1/2" thick shop made auxiliary fence to your existing fence without the clamp interfering with your work and you will never damage your original fence again.

Slides into channels located on underside of Guide Rail. Hidden design results in no interference with movement of SP6000.

Features:Fits into a 3/8” hole in the top of the auxiliary fenceSteel threaded components with rigid aluminum bodyRange of travel 1/2″-5-3/4″ (12mm to 146mm) Specs: Clamp Arm Size: 3/8"Range of Travel: 1/2" – 5-3/4” (12mm – 146mm)Material: Aluminum and steelIncludes: Set of two FenceClampsWeight: 0. 95 lbs.

KHCCC 90° Corner Clamp - KREG Works on 90° corners and “T” joints Cast aluminum "V" and wedge pads 1" maximum thickness capacity Automaxx® auto-adjust technology Easy-to-regulate clamping pressure with thumbwheel Cutout allows driving a pocket-hole screw without removing clamp Padded, ergonomic handles.

Designed and modeled after the popular Bessey GTR16S6H Guide Rail & Table Clamp, our new clamp is perfect for secure & rapid fastening of guide rails from Festool, Makita, DeWalt, Hitachi, Metabo & other popular tracks. Compare versus Bessey GTR16S6H at $39.

A must for any shop. A quick safe method to secure work| "Safety First" You can't afford to be without at least one|.

B3599 12" Handscrew Clamp This hand screw clamp is made of hard maple jaws with cold drawn carbon steel spindles and swivel nuts. The acme thread is for quick clamping and the large handles provide comfort and control.

Auto-Adjust Technology Thanks to Automaxx® Auto Adjust Technology Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.

The 4-Way Equal Pressure Clamp is an innovative clamping solution designed to apply even pressure on all sides of your woodworking projects, ensuring precise and square assembly. This clamp is ideal for gluing and assembling panels, frames, and other workpieces that require uniform pressure to prevent warping or misalignment.

Ideal for mitre joints and picture framing.

The Milescraft 8" ClampSquares are the ultimate solution when you need to square up corners in your woodworking assembly and gluing applications. These ClampSquares are durable and lightweight, making them easy to use.

3-1/4" Throat Face Clamp - KREG This unique clamp is designed specially for pocket-screw joinery. It helps to ensure a perfectly flush joint every time.

Ideal for layout work and setups Matched pairs are hardened and ground Set of 4 pairs come in widths of 1. 000",1.

Simple, easy to use design. Excellent holding power. Easily secured to channels in underside of Accu-Cut track and Starting Block. Durable molded construction.

Right Angle Clamp - KREG Holds pocket-hole joints at 90° during project assembly Automaxx® technology adjusts automatically to material thickness Contoured grips for added comfort Pin fits securely into pocket-hole Swivel pad holds mating piece 5" (127mm) reach The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together.

This angle strap clamp, with its various angles and swiveling pressure plates, provides infinite angle adaptability and continuous high pressure on all mitered corners and tightens automatically as it clamps. The specially woven polyester strap guarantees high-tensile strength (up to 1,100-pounds) with almost no stretch.

Auto-Adjust Technology Thanks to Automaxx® auto adjust technology Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.

The Milescraft 4" ClampSquares are the ultimate solution when you need to square up corners in your woodworking assembly and gluing applications. These ClampSquares are durable and lightweight, making them easy to use.

FEATURES Made from impact-resistant plastic Non-marring Can be used with almost any type of clamp.

2pc, 4" Mini Ratcheting Clamp One-handed control Reversing jaw with non-maring pad Converts to spreader Qty: 2pc.