The IVac Switch The iVac automatically turns your dust collection system on as soon as your power tool is turned on. A great tool that can save time and make your shop a safer place to work in.

Dust collection systems build up static electricity and if they are not properly grounded the electricity can become a serious hazard that could start a flash fire. Our grounding kit provides everything you need to ground a dust collection system, including directions for installation.

Switch with Remote Controller for Dust Collectors Activate your dust collector from anywhere in your shop. 220V, 20 Amp works with all 220V dust collectors up to 3 HP Optional Items Available Model CT075B - Batteries Model CT075 - 110V Remote for Dust Collectors Up To 1 1/2 HP.

This 4" adjustable dust control handle allows you to easily move your hose from machine to machine by simply clamping your 4" dust collection hose over the fitting port. The large handle can be adjusted to different position and can be locked in position using the lock knob.

Switch with Remote Controller for Dust Collectors Activate your dust collector from anywhere in your shop. 110V, 15 Amp works with all 110V dust collectors up to 1 1/2 HP Optional Items Available Model CT075B - Batteries Model CT075220 - 220V Remote for Dust Collectors Up To 3 HP.

This accessory can be very handy for any work shop. Collect dust effectively from virtually any woodworking machine.

Over Arm Blade Guard System Craftex CX-Series Add safety and dust collection to your table saw with this Over Arm Blade Guard. This floor standing unit will fit just about any table saw and comes with an extra support bracket that will bolt directly to your table saw base.

This concise 50-page book guides the reader through all the necessary steps in setting up his/her own central dust collection system. Simple and skillful, this book delivers a wide range of tips, hints, suggestions and techniques to making you workshop a safer and cleaner environment to work in.

Capture dust from any machine operation with this BIG GULP FLOOR STANDING DUST COLLECTOR. Just attach a 4"dust collection hose and adjust the hood to the right height and position it where needed.

To be used with standard trash cans 20 3/4" diameter Allows heavier particles to drop out of air stream Just lift off the bucket to make clean up easy.

Collection bag size: 9. 68” x 33.

17" Steel Dust Pan Double riveted tubular steel handle High visibility cushioned grip Durable electroplate finish resists rust and corrosion.

This 2pc Universal hook set is extremely versatile. Made from high strength plastic, these hooks are very strong, with a weight capacity of 15kg per hook.

To be used with 5 Gallon Buckets 11 3/4" diameter Allows heavier particles to drop out of air stream Just lift off the bucket to make clean up easy To be used with 2 1/2" Shop-Vac hose.

(1) 4" in feed elbow(1) 4" outfeed elbow(1) hardware pack(2) 4" turn key hose clamps.

Just cut the tube to length then fasten thimble ports to your wall or ceilingGreatly reduces ambient noise in the shop Specifications: Two 4" OD x 3-3/4" ID thimble ports18" long x 4" diameter clear tube Included: (2) 4" thimble port fittings(1) 18” x 4" tubing and hardware.

4" Hose Clamp suitable for use with multiple hose materials 4" in diameter. Easy to install and uninstall for convenient dust collection in your shop.

Just cut the tube to length then fasten thimble ports to your wall or ceilingGreatly reduces ambient noise in the shop Specifications: Two 2-1/2" OD x 2-1/4" ID thimble ports18" long x 2-1/2" diameter clear tube Included: (2) 2-1/2" thimble port fittings(1) 18” x 2-1/2" tubing and hardware.