Description
CXCANISTER
Convert and upgrade your existing Dust Collector 1 micron canister replacement filter and bag to help keep even more of that fine particulate saw dust out the air and out of your lungs. Not only will your lungs thank you but your dust collector will function even more efficiently. This canister features a V-Weave filter design effectively increasing the filtering area by over 6 times when compared to standard cloth bags. With the Canister, simply turn the handle located at the top of the canister to rotate the internal flapper. The flapper removes dust particles and shakes of caked on dust into the lower bag of your dust collector. Dust disposal is now safer and no longer a chore with this 1 micron canister. Fits all makes and models of dust collectors with a 19 5/8" diameter.
Includes:
Canister Filter
Metal Strap
Fits most common 2HP & 3HP dust collectors in the market from Craftex, Grizzly, King, Jet, Delta and more.
31 Reviews
-
Canister filter.
This filter makes a significant difference in the power my 2hp system has.
-
1 Micron Canister Filter
I received the product in damaged condition. Reached out to customer service couple of time and the call gets disconnected when they tried to transfer the call. Product functions as expected but not happy with arrival of damaged product and lack of customer service.
-
Fits my Penn State Dust collector
It works. It fits my Penn State Dust collector that is 20 years old.
-
1 Micron Cannister Filter
Sturdily built, and effective. Fitting it to my Trademaster 2 HP system was challenging, (as I knew it would be) I had to add an internal sheet metal sleeve so that the canister would fit, as it was designed for a slightly smaller OD. There is not a lot of give in the bottom rubber. I also needed to seal the joint with good duct tape after fitting. The supplied clamp is very flimsy and broke easily. I used the old bag clamp.
-
Canister filter
I bought this to upgrade my older Delta 50-850C 1-1/2 hp dust collector. It had the 2 bag system with the upper one acting as the filter, lower as collector. The diameter of each side is approximately 19-5/8", so I was hopeful that I could adapt the canister to fit the top. I had seen a few YouTube videos on the subject. I was pleasantly surprised to find that the canister fit perfectly, snugly, tightly, with relatively little effort fitting in in the upper 'ring' of the collector. No adaptation necessary. The collector works very well with the new canister, but I think I will try to add a baffle to the lower half to act more like a cyclone. This canister is an excellent upgrade for bag-type collectors.
-
Best thing I ever did! No more dust in the air.
Worth waiting for. Thanks
-
Fits General International #10-105 1.5 HP
I have a general international #10-105 1.5 HP dust collector and really wanted to upgrade the dust bag that came with it. I had been getting more paranoid about dust in the air and got a proper dust sensor, which showed how many tiny particles the bag was shooting into the air. The general brand filter was about 500$, then I saw this one here for about half that and figured it was worth a try. The rubber bottom seal fit JUST over the lip on the dust collector. Snug enough that it didn't even need the band to hold it; good thing too, as the other reviews pointed out, it was really weak and broke when I tried to use it. According to my particle counter this made a world of difference to how many particles get shot into the air every time I turned the collector on, probably 1/5 of how many came out with the filter bag.
-
Filter canister
Awesome product, increased air flow by at least double over the cloth filter. Highly recommend this product.
-
1 MICRON CANISTER FILTER 2HP 3HP DUST CXCANISTER
It works as it should, however, it is a HUGE fight to install
