BELT SANDER METALWORKING CX SERIES CX503

(No reviews yet) Write a Review
Now: $869.00
Was: $1,019.00
You save $150.00
Model:
CX503
Brand:
Weight:
93.00 KGS
Shipping:
Calculated at Checkout
Online Status:
IN STOCK ONLINE
On Sale
  • BELT SANDER METALWORKING CX SERIES CX503
  • BELT SANDER METALWORKING CX SERIES CX503
  • BELT SANDER METALWORKING CX SERIES CX503
  • BELT SANDER METALWORKING CX SERIES CX503
  • BELT SANDER METALWORKING CX SERIES CX503
  • BELT SANDER METALWORKING CX SERIES CX503
Check Stock at your local store
In Stock
(Stock availability may not 100% accurate )

Description

CX503

Metal Working Belt Sander – Craftex CX-Series

Featuring a powerful 2-HP motor and heavy duty cast iron construction the CX503 is built to the professional metalworker’s demand. The 3” x 78” sanding belt rotates at a speed of 35 m/s on two rubber contact wheels and can be operated horizontally and vertically between 0 – 60 degrees. For optimum dust removal the sander is equipped with two dust ports; one at the front and one at the rear of the machine. The CX503 comes with a sturdy base which ensures stability while operation.

Other features of CX503 are quick angle adjusting lever for adjusting the sander angle, tool rest and an eye shield to protect user’s eyes from sparks produced while sanding.

Like all CX-Series machines, this unit features powder coated paint, sharp looking two tone colours and a full 3 year warranty.


SPECIFICATIONS

Motor Type: TEFC
Motor Horsepower: 2-HP
Motor Phase & Voltage: Single Phase 220-Volt
Amperage: 10-Amps
Bearings: Sealed and Permanently Lubricated
Cycle & RPM: 60 Hertz and 3400 RPM
Sanding Belt Size: 3” x 78”
Contact Wheel Diameter: 7-3/4” (195mm)
Contact Wheel Surface: Rubber
Sanding Belt Speed: 35 m/s
Sanding Belt Tilt: 0 – 60-degree
Width: 26”
Length: 43”
Height: 37”
Shipping Crate: 28” x 19” x 44”
N. Weight: 158 lbs, 72 Kg
G. Weight: 203 lbs, 93 Kg
Warranty: 3-Year

View AllClose

Previously Viewed

DRUM SANDER 26IN. CRAFTEX CX SERIES CSA

DRUM SANDER 26IN. CRAFTEX CX SERIES CSA CX504

Now: $2,849.00
Was: $3,599.00
CX504 26" Drum Sander - Craftex CX-Series The CX504 features a high output 3HP motor which turns the two 6" drums at a speed of 1600 RPM for an excellent result. This sander can take work-pieces up...
CX504
Now: $2,849.00
Was: $3,599.00
SANDER BELT AND DISC COMBO CSA CRAFTEX CX501

SANDER BELT AND DISC COMBO CSA CRAFTEX CX501

Now: $899.00
Was: $1,199.00
CX501 12” Disc & Belt Sander Combo - Craftex CX-Series The combination of a heavy duty disc and belt sander makes this machine a must for any serious woodworker. The 6” x 48”...
CX501
Now: $899.00
Was: $1,199.00
BELT/EDGE SANDER 4IN. CRAFTEX

BELT/EDGE SANDER 4IN. CRAFTEX CT094

Now: $299.00
Was: $365.00
4" Bench Top Edge Sander A direct drive motor gives power to a 4" belt sander, which may be used vertically as an edge sander or flat as a standard belt sander. An auxiliary table allows the end of...
CT094
Now: $299.00
Was: $365.00
GRINDER AND SANDER 8IN. X 2IN. COMBO CRAFTEX CT169N

GRINDER AND SANDER 8IN. X 2IN. COMBO CRAFTEX CT169N

Now: $129.00
Was: $169.00
CT169N Bench Grinder & Belt Sander Combo – Craftex The CT169N grinder and sander combo tool is perfect for knife honing, tool sharpening and sanding small parts. The 1/2-HP, 120-Volts...
CT169N
Now: $129.00
Was: $169.00
SANDER OSCILLATING SPINDLEBELT COMBO CSA

SANDER OSCILLATING SPINDLE BELT COMBO CS CX500

Now: $999.00
Was: $1,299.00
CX500 Oscillating Spindle & Belt Sander Combo - Craftex CX-Series This heavy duty sander features a powerful oscillating spindle sander and a multi position belt sander to tackle just about any...
CX500
Now: $999.00
Was: $1,299.00
BELT SANDER 4IN. X 24IN. 11 AMP MAKITA

BELT SANDER 4IN. X 24IN. 11 AMP MAKITA

Now: $309.00
Was: $476.00
9403 4" x 24" Belt Sander - MAKITA Makita’s 4" x 24" Belt Sander, model 9403, combines power and speed with ease-of-use features and less noise for fast and efficient stock removal. The 9403...
9403
Now: $309.00
Was: $476.00
DISC SANDER 12IN. CX SERIES CX506

DISC SANDER 12IN. CX SERIES CX506

Now: $235.00
Was: $265.00
CX506 12" Disc Sander - Craftex CX-Series Powered by a 1.2 HP motor this 12" disc sander operates at a speed of 1750 RPM and is designed for accuracy and efficiency. The 16-3/8" x 6-7/8" table...
CX506
Now: $235.00
Was: $265.00
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley