RESAW CARBIDE BANDSAW BLADE LAGUNA 14" S

Resaw King 115 in. x 3/4 in. Carbide-Tipped Bandsaw Blade

Achieve smooth, accurate resaw cuts with minimal material loss using the Resaw King carbide-tipped bandsaw blade. Designed for cutting hardwoods and exotic woods, this premium blade features C4 carbide-tipped teeth that maintain a sharp cutting edge and can be resharpened four to five times.

Variable tooth spacing helps reduce vibration during cutting while producing a clean, consistent surface. Its ultra-thin 0.044 in. kerf removes less material with each pass, helping reduce wood waste when resawing valuable stock.

The 2–3 TPI variable tooth pattern and alternating 12 mm, 14 mm, and 16 mm pitch are designed to support efficient chip removal and smooth cutting performance. The blade’s 0.024 in. backing provides a balance of flexibility and stability for demanding woodworking applications.

Manufactured in Germany exclusively for CET and finished in the USA using CNC equipment, the Resaw King is designed for woodworkers seeking high cut quality and reduced sanding after resawing.

Features

• Designed for resawing hardwoods and exotic woods
• C4 carbide-tipped teeth provide long-lasting cutting performance
• Blade can be resharpened four to five times
• Variable 2–3 TPI tooth pattern helps reduce vibration
• Variable tooth pitch supports smooth, controlled cutting
• Ultra-thin kerf reduces material loss and wood waste
• Produces a smooth cut that may require minimal sanding
• 3/4 in. blade width provides stability during resawing
• Manufactured in Germany exclusively for CET
• Finished in the USA using CNC equipment

Specifications

• Blade length: 115 in.
• Blade width: 3/4 in.
• Blade gauge: 0.024 in. (0.6 mm)
• Kerf: 0.044 in. (1.1 mm)
• Teeth per inch: 2–3 variable TPI
• Variable pitch: 12 mm, 14 mm, and 16 mm
• Tooth material: C4 carbide tipped
• Resharpenable: Yes
• Recommended application: Resawing hardwoods and exotic woods

FAQ

What is the Resaw King blade designed for?

It is designed primarily for resawing hardwoods and exotic woods while producing a smooth cut with minimal material loss.

What size is this blade?

The blade measures 115 in. long and 3/4 in. wide, with a 0.024 in. backing thickness.

What is the blade kerf?

The kerf is 0.044 in. (1.1 mm).

What does variable 2–3 TPI mean?

The spacing between the teeth varies rather than remaining uniform. This helps reduce vibration and supports smoother cutting.

Can the blade be resharpened?

Yes. The C4 carbide-tipped teeth can be resharpened approximately four to five times.

Will this blade reduce wood waste?

Its thin 0.044 in. kerf removes less material than a wider-kerf blade, helping preserve more of the workpiece during resawing.

Does the cut require sanding?

The blade is designed to produce a very smooth cut, so little sanding may be required depending on the material, machine setup, and feed rate.

Will this blade fit my bandsaw?

Compatibility depends on whether your bandsaw accepts a 115 in. long, 3/4 in. wide blade. Confirm your machine’s blade length and maximum blade-width specifications before ordering.