null

SEMI PRO 2 STAGE SYSTEM FUJI

  • SEMI PRO 2 STAGE SYSTEM FUJI
  • SEMI PRO 2 STAGE SYSTEM FUJI
Free shipping over $100 & under 30kg
(8 reviews) Write a Review
CAD $589.00
Model:
2202
Brand:
Weight:
12.00 KGS
Shipping:
Calculated at Checkout
Online Status:
IN STOCK ONLINE
Paybright
Paybright
Check Stock at your local store
In Stock
(Stock availability may not be 100% accurate.)

Description

2202 - Semi-Pro2 System with Bottom Feed Spray Gun (7001 M-Model Spray Gun)

The Semi-Pro 2 is the perfect HVLP spray system for serious DYR-ers and semi-professionals.
Powerful 1400 watt motor provides enough power to spray all coatings, develops approximately 5psi. Durable metal turbine case sits on 4 rubber feet, with a modular power cord. Full length 25ft Hi-Flex hose includes air control valve to reduce over spray to a minimum. Brass quick-connect coupler for gun to hose connection. The turbine also features a handy gun stand. No other HVLP system in this price range comes even close to matching the quality and features of the Semi-Pro 2 system. 
Turbine Dimensions: 11" x 8.6" x 8.1" / Metric Dimensions: 28cm x 22cm x 20.5cm 

7001 M-Model Spray Gun has all the professional features:
Non-bleed spray gun for less blowing around of shop dust and over spray
Dedicated Fan Pattern Control to adjust the fan size from small and circular to large vertical or horizontal fan
Stay Cool Handle- nylon-coatedhandle always stays cool even after long periods of spraying
1 Qtcup
1.3mm Aircap Set installed
Easy to clean and comfortable to use
2-year warranty on all parts and labour

WEIGHT: 25.2lb/ 11.43kg
DIMENSIONS: 16.5 x 14 X 15.5 inches / 42 x 35.5 x 38.5 cm





View AllClose

8 Reviews

  • 4
    Fuji semi pro 2 stage sprayer

    Posted by Brian on 1st Jan 2021

    I purchased the sprayer recently and found it to work very good.I was spraying latex paint and it took a bit of experimenting to get the right viscosity but once I figured that out it worked very good. I am a first time sprayer. It was easy to clean if you follow the instructions .

  • 5
    great sprayer well worth the money

    Posted by Al Graw on 9th Jul 2020

    wish it would have include the remote attachment and a #2 and #4 tip plus flex hose and it would e perfect

  • 5
    best bang for the buck

    Posted by tony on 12th Nov 2014

    made well and does the job flawlessly

  • 4
    Good job quality excellent

    Posted by Al Williams on 9th Apr 2014

    I was looking for a solution to my spraying challenges . tried this system for the first time today this is going to work great . More horse power so to speak may be an advantage later ie a 4stage turbine but for the money this is great the gun is well built and seems like it will stand the test of time .

  • 5
    Great DIY sprayer

    Posted by Unknown on 20th Jan 2014

    Just bought this unit and have used it only a few times, but I am super impressed with it. Easy to setup, easy to use, easy to clean. Compressor is a little loud but it's not unbearable. Really impressed with the finish it leaves. I would highly recommend it for all DIY'er's.

  • 3
    Average value

    Posted by Glenn on 24th Jun 2013

    Initially my gun had two problems which Fuji fixed by swapping out the gun 1. Cup clamp was cracked 2. Pattern knob would not gradually change the pattern. It was either round or a fan but no adjustment in between. System sprays precat lacquer with slight thinning, about 70/30 with nice results. It will spray unthinned but not well. I will eventually swap the two stage out for a minimite 4.

  • 4
    Great Addition to our shop

    Posted by Unknown on 10th May 2013

    Our new Fuji Spray Semi Pro is a great addition to our shop. Though the pressure is not adequate to atomize topcoat, the ease of mobility and clean-up have made this unit a favourite for applying primer and build coats. The quick coupler on the air hose is a bit too easily disconnected but in general the sprayer surpasses our expectations and will eventually get replaced with a four stage from Fuji.

  • 4
    Solid Build and nice gun Feel

    Posted by Unknown on 18th Dec 2012

    Good solid construction and simple details. I expect this unit to do lots of work. Gun has a nice feel and is simple to set up. I was spraying within 10 minutes of opening the box.

View AllClose

Additional Information

freeship:
Available Free Shipping
View AllClose
  • WHY SHOP WITH US
    QUALITY STAFF
    ESTABLISHED 1976
    100% CANADIAN
    ACROSS CANADA
    BUY & SELL DIRECT
    Crown Lubricants
    DeWalt
    Stanley