Description
Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status.
The 13″ Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below. This model features a 1-3/4 HP motor, and can handle stock up to 4″ thick, or as thin as 1/32″. It can also be equipped with an optional sanding drum for surface sanding. 13″ COMBINATION BRUSH/DRUM SANDER FEATURES: Infinitely variable brush speed and conveyor feed rate. Optional Drum for surface sanding. Quickly change brush heads or abrasive loadings. Fully adjustable tension rollers prevent stock slippage. Reinforced steel conveyor bed with a poly conveyor belt. Precision height adjustment. Bristle Contact Gauge included.
Features:
Infinitely variable brush speed and conveyor feed rate
Optional Drum for surface sanding
Quickly change brush heads or abrasive loadings
Fully adjustable tension rollers prevent stock slippage
Reinforced steel conveyor bed with a poly conveyor belt
Precision height adjustment
Bristle Contact Gauge included
Specifications:
Maximum Sanding Width: 13″
Minimum Sanding Length: 9″
Maximum Sanding Thickness: 4″, varies with drum/brush style
Top Filter Bag Length: 1 Micron Cloth – 32”
Minimum Sanding Thickness: 1/32″
Dimensions: 35″ D x 42″ W x 44″ H
Drum: 5 x 13 Extruded Aluminum
Brush: 6-8 Typical Diameter
Speed: Infinitely Variable 400-1200 RPM
Dust Hood: 1 – 4″ vacuum port, hinged at back (min. 600CFM recommended)
Speed: Infinitely Variable 400-1200 RPM
Dust Hood: 1 – 4″ vacuum port, hinged at back (min. 600CFM recommended)
Conveyor Motor: 43″ -lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM
Drive Motor (TEFC): 1-3/4HP
Power Requirements: 110V, 15 Amp, 20 Amp Service
Shipping Weight: 136.1 Kg/300 lbs (approx., varies based on how equipped)
