GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

(No reviews yet) Write a Review
Now: $82.44
Was: $96.99
You save $14.55
Model:
842FLH38
Brand:
Weight:
0.49 KGS
Shipping:
Calculated at Checkout
Online Status:
IN STOCK ONLINE
On Sale
Check Stock at your local store
In Stock
(Stock availability may not 100% accurate )

Description

Fingernail Profile Gouges
3/8" Bowl Gouge (Long Handle)
There is difficulty in achieving this profile. Robert Sorby offers a selection
of gouges with a factory ground
fingernail profile, which is not only safe in use, but also allows the turner
to modify the profile to his
specific requirements.
Wing tips ground back so they cannot catch on the work
Pulling and pushing cuts can be taken
Delicate shearing cuts and full profiling cuts are easier
Can be easily sharpened using the Robert Sorby Fingernail Profiler


View AllClose

Previously Viewed

GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

Robert Sorby

GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

Now: $97.75
Was: $115.00
Bowl Gouge by Robert Sorby- «" - 23" Length Deep fluted to allow heavy cuts to be taken. This tool is used over on its side (about 15-20? off the vertical) with the flute pointing in the direction of...
842FLH12
Now: $97.75
Was: $115.00
PEN TURNING SET INTERCHANGABLE SORBY

PEN TURNING SET INTERCHANGABLE SORBY

Now: $92.65
Was: $109.00
86HS Interchangeable Pen Turning Set - Robert Sorby The set comes with three different cutters for roughing down, finishing and detailing and is a perfect set for the pen turners. The...
86HS
Now: $92.65
Was: $109.00
GOUGE SPINDLE FINGERNAIL 1/2IN. SORBY

Robert Sorby

GOUGE SPINDLE FINGERNAIL 1/2IN. SORBY

Now: $56.09
Was: $65.99
Fingernail Profile Gouges - 1/2" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile,...
840FH12
Now: $56.09
Was: $65.99
HOLLOWING TOOL 20IN. L 12IN. HL SORBY

HOLLOWING TOOL 20IN. L 12IN. HL SORBY

Now: $60.34
Was: $70.99
Hollowing Tool 20" By Robert Sorby H.S.S. Designed specifically for those who wish to make hollow forms or vases Handle length: 12" Replacement Cutter model 851C
855H
Now: $60.34
Was: $70.99
PARTING TOOL 2MM FLUTED SORBY

PARTING TOOL 2MM FLUTED SORBY

Now: $69.99
Was: $84.99
2 mm Parting Tool Fluted 18" long Used with flute downwards. This tool gives an exceptionally good finish even when parting through end grain. Sides taper ground for clearance. High Speed Steel
832H2M
Now: $69.99
Was: $84.99
GOUGE SPINDLE FINGERNAIL 3/8IN. SORBY

Robert Sorby

GOUGE SPINDLE FINGERNAIL 3/8IN. SORBY

Now: $42.99
Was: $52.99
Fingernail Profile Gouges - 3/8" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile,...
840FH38
Now: $42.99
Was: $52.99
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley