Fuji Spray

9775 1000cc Gravity Cup Assembly for T-Series Gravity Gun - FUJI Gravity Cup Assembly for T75 Gravity Gun (FOR T75 SERIES ONLY) 1000cc Cup with Check Valve Assembly

9760 600cc Gravity Cup Assembly for T-Series Gravity Gun - FUJI Gravity Cup Assembly for T75 Gravity Gun (FOR T75 SERIES ONLY) 600cc Cup with Check Valve Assembly

2060 Gravity Cup Parts for T-Series Gravity Gun - FUJI 600cc Gravity Cup Parts Kit for T75 SERIES Gravity Spray Gun. Includes 5 Gaskets And 5 Check Valves

Air Control Valve - FUJI This air control valve connects between the hose and the brass quick connect and controls the air flow. It limits the cfm/pressure to the gun reducing the bounce back and...

70202 1mm Fine Aircap Set no. 2 for M Gun - FUJI Size: 1mm

51002 1.0mm Air Cap Set for T-Series - FUJI Fine to Medium Output, Great for most fine finishing including water-based/borne coatings. Allows for thinner, wet coat to be applied. Automotive enamel...

1mm Aircap Set #3 Fine 1mm (.039") size aircap set for finer atomization. It is suitable for most water-based lacquers and shading. For Xpc Spray gun only and does not fit older Fuji Spray guns

51004 1.5 mm Air Cap Set for T-Series - FUJI Medium Output, Similar to the #3 but requires less thinning. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based...

1.8mm Aircap Set #5 High output 1.8mm (.070") aircap set for faster production with any type of paint. It is used for XT Spray gun only and does not fit older Fuji Spray guns

51005 1.8 mm Air Cap Set for T-Series - FUJI High Output, Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher...

70205 1.8mm High Output Aircap Set no. 5 for M Gun - FUJI Size: 1.8mm