Measuring Tools

Measuring Tools

  • SAW SET MITER SAW PROTRACTOR

    Now: CAD $20.99
    Was: $23.99
    B3810 Sawset, not your standard protractor! It's scales have been calibrated to give miter saw settings with absolutely NO MATH, guessing, or waste! Sawset is double sided with 2 large easy to read scales, for double miters, single...
    B3810
    Now: CAD $20.99
    Was: $23.99
    Add to Cart
  • Stanley

    STANLEY 30 455 TAPE MEASURE 25 X 1

    Now: CAD $4.99
    Was: $9.99
    30455 Featuring a polymer-coated blade, high-impact ABS case, and a Tru-Zero® end hook, pros and DIYers alike can count on this STANLEY® 25' tape measure for precise measurements and long-lasting durability. It's easy to read, easy to use, and...
    30455
    Now: CAD $4.99
    Was: $9.99
    Add to Cart
  • Stanley

    STANLEY FAT MAX 25 X 1 1/4 MEASURE TAPE 33725

    Now: CAD $18.99
    Was: $34.99
    33725THR The STANLEY FatMax 25 ft Tape Measure is extra tough and durable thanks to industrial-grade BladeArmor coating on the first 3" and a high-impact ABS case. Features & Benefits 11' blade standout 1-1/4" wide blade for easy...
    33725
    Now: CAD $18.99
    Was: $34.99
    Add to Cart
  • GemRed

    7IN. DIGITAL ANGLE RULER PLASTIC

    Now: CAD $16.99
    Was: $19.99
    B3740 This angle finder ruler is capable of measuring both angle and length in metric or imperial scale. This would be a great tool for woodworking and setup or adjusting of table saw blade angle, miter saw, and band saw. Features: Measuring angles...
    B3740
    Now: CAD $16.99
    Was: $19.99
    Add to Cart
  • GemRed

    7IN. DIGITAL ANGLE RULER STAINLESS STEEL

    Now: CAD $24.99
    Was: $29.99
    B3739 This angle finder ruler is capable of measuring both angle and length in metric or imperial scale. This would be a great tool for woodworking and setup or adjusting of table saw blade angle, miter saw, and band saw. Features: Measuring angles...
    B3739
    Now: CAD $24.99
    Was: $29.99
    Add to Cart
  • GemRed

    DIGITAL PROTRACTOR INCLINOMETER IP65 WIT

    Now: CAD $75.00
    Was: $99.99
    B3738 This GemRed Digital protractor is equipped with a absolute level sensor which means there is no need to calibrate this unit. This unit is also equipped with a large easy to read backlit display. This is a Great tool for precision setup of all...
    B3738
    Now: CAD $75.00
    Was: $99.99
    Add to Cart
  • GemRed

    DIGITAL ANGLE BOX LEVEL

    Now: CAD $24.99
    Was: $29.99
    B3737 With the angle sensor technology this unit can be used for many things like helping dial in the desired angle of your table saw blade with greater accuracy. The digital angle box level displays the measurements on a large backlit easy to read LCD...
    B3737
    Now: CAD $24.99
    Was: $29.99
    Add to Cart
  • DIAL INDICATOR TYPE A1 921 1IN. TRAVEL

    DIAL INDICATOR TYPE A1 921 1IN. TRAVEL

    Now: CAD $19.99
    Was: $27.99
    Dial Indicator 2" Dia. Face - 1" Travel These dial gauges fit all standard magneticc bases| Satin chrome-plated case Easy-to-read faces .001" reading Precision ground hard chrome-plated stem and contact point
    B444
    Now: CAD $19.99
    Was: $27.99
    Add to Cart
  • THICKNESS GAUGE 26 LEAVES

    THICKNESS GAUGE 26 LEAVES

    CAD $5.99
    B622 Thickness Gauage 26 leaf thickness gauge. Each leaf is marked. Leaves from .0015” to .025”Edge of each leaf is round and approximately 3 3/8” long. High quality tempered steel, and made to close tolerances.
    B622
    CAD $5.99
    Add to Cart
  • Wixey Digital

    DRILL PRESS HEIGHT GAUGE WIXEY

    Now: CAD $69.99
    Was: $79.99
    WR503 Drill Press Depth Gauge - Wixey The Wixey WR503 Drill Press Depth Gauge mounts to any drill press. It can be attached to the existing depth stop rod or directly to the collar on the quill. This device allows the user to quickly set the readout...
    WR503
    Now: CAD $69.99
    Was: $79.99
    Add to Cart
  • Igaging

    IGAGING 0 6IN. DIGITAL CALIPER

    Now: CAD $89.99
    Was: $109.99
    B3487 0 - 6" Digital Calliper - iGaging Built in smart wireless data connectivity for smart phone and tablet Auto shut-off Ultra measure speed Ultra speed movement Hardened stainless steel
    B3487
    Now: CAD $89.99
    Was: $109.99
    Add to Cart
  • Igaging

    ANGLE CUBE DIGITAL SENSOR LEVEL IGAGING

    Now: CAD $52.99
    Was: $59.99
    B3476 Angle Cube Digital Sensor Level - iGaging Portable digital angle gauge with magnetic base feature rich, smaller and lighter than ever before! get precise angle readings. Large LCD display reads upright at any angle. Digital angle...
    B3476
    Now: CAD $52.99
    Was: $59.99
    Add to Cart
  • ROK

    6 INCH POCKET RULER

    Now: CAD $1.99
    Was: $2.99
    B3455 6" Pocket Ruler SAE & Metric 1/32 and mm Decimal equivalents listed on back Stainless Steel
    B3455
    Now: CAD $1.99
    Was: $2.99
    Add to Cart
  • ROK

    BEAM COMPASS

    Now: CAD $5.50
    Was: $7.99
    B3427 Beam Compass Designed to mark circles on drywall, plywood and other building materials Helps make accurate hole markings Adjustable pivot point and integrated pencil holder make perfect circles 16" long fibreglass
    B3427
    Now: CAD $5.50
    Was: $7.99
    Add to Cart
  • Igaging

    DIGITAL HEIGHT 0 1/4IN. GAUGE IGAGING

    Now: CAD $26.99
    Was: $29.99
    B3406 Digital Height Gauge - iGaging Resolution 0.0005"/0.01mm/64th fraction Measures range 1/4" depth to 2" height Accuracy 0.001"/0-1" Auto shut-off Smooth spring plunger movement Flat and bail-tip anvils included Rare earth magnetic...
    B3406
    Now: CAD $26.99
    Was: $29.99
    Add to Cart
  • ALUMINUM MITER TRACK 32IN. P294402

    Now: CAD $12.99
    Was: $15.99
    B3262 32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled holes
    B3262
    Now: CAD $12.99
    Was: $15.99
    Add to Cart
  • MEASURING TAPE 3/4IN. X 16FT

    CAD $8.99
    B3310 16ft, 3/4" Measuring Tape Featuring a strong polycarbonate case with rubber grip, calibrated inch and metric measurements and one hand tape position holder for desired convenience.  Standout - 16 ft Tape lock Belt clip
    B3310
    CAD $8.99
    Add to Cart
  • Igaging

    14IN. DIGITAL RULE AND PROTRACTOR IGAGING B312814

    Now: CAD $32.99
    Was: $36.99
    B312814 Digital Protractor & Rule 2 in 1 Stainless steel rule blades with mm and inch marking scales Strong/firm lock Hold function Reversible reading Inside & Outside angle measure Easy to use & easy to carry Light...
    B312814
    Now: CAD $32.99
    Was: $36.99
    Add to Cart
  • MICROMETER 0 1 0.0001 OUTSIDE

    MICROMETER 0 1 0.0001 OUTSIDE

    CAD $32.99
    Outside Micrometers - 0"-1" Measuring faces carbide tipped for a long tool life Enamelled frame of malleable cast iron Spindle thread hardened ground and lapped Ratchet stop for exact readings
    B105101
    CAD $32.99
    Add to Cart
  • STEEL RULE 12IN. INCH/METRIC

    STEEL RULE 12IN. INCH/METRIC

    CAD $4.99
    ÿþB2153 12" (300mm) Stainless Steel Rule This 6" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.
    B2153
    CAD $4.99
    Add to Cart
  • SCALE 6IN. STAINLESS STEEL

    SCALE 6IN. STAINLESS STEEL

    CAD $3.99
    B3097 6" (150mm) Stainless Steel Scale This 6" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.
    B3097
    CAD $3.99
    Add to Cart
  • DIGITAL CALIPER 6IN. /150MM IGAGING

    Igaging

    DIGITAL CALIPER 6IN. /150MM IGAGING

    Now: CAD $29.99
    Was: $31.99
    B31586 6" Digital Calliper - iGaging Easy to Read Super Large Display LCD Quick measure speed at 120” per second Water, oil and dust resistance Hardened stainless steel Inside & Outside measures Precision lapping finish Accuracy: 0.0015”/6”...
    B31586
    Now: CAD $29.99
    Was: $31.99
    Add to Cart
  • HOLDER FOR DIAL INDICATOR W/MAGNET

    HOLDER FOR DIAL INDICATOR W/MAGNET

    CAD $19.99
    Holder for Dial Indicator with Magnet Whether you are cross cutting, ripping or any other job, the alignment of the blade plays an important role to get an accurate result. This dial indicator holder can fit the miter slot (3/4") of your table saw and...
    B2939
    CAD $19.99
    Add to Cart
  • STEEL RULE 24IN. STAINLESS

    Now: CAD $3.99
    Was: $7.99
    Stainless Steel Rules 24" Stainless steel clearly graduated in 1/2mm and millimetres on the metric side; and 16ths, 32nds and 64ths on the imperial side.
    B1931
    Now: CAD $3.99
    Was: $7.99
  • DIAL BORE GAUGE 2 6IN.

    Igaging

    DIAL BORE GAUGE 2 6IN.

    Now: CAD $99.99
    Was: $115.00
    B3149 2" to 6" Dial Bore Gauge - iGaging This is a precision dial bore gauge set from iGaging for precise measurement of cylinder bores, main caps, and connecting rods. Easy to Use and Read Super Precision Deep Bore Gauge Extension Holder Measures...
    B3149
    Now: CAD $99.99
    Was: $115.00
  • Igaging

    DIGITAL CALIPER 0 6IN. LARGE LCD

    Now: CAD $39.99
    Was: $45.99
    B3259 6" Digital Caliper - iGaging Large Display for easy view High Measuring speed 120"/second 3 Reading: Inch, Metric and Fraction Dust resistance Hardened Stainless Steel with precision lapping finish Smooth movement SPECIFICATIONS Measure...
    B3259
    Now: CAD $39.99
    Was: $45.99
    Add to Cart
  • SCREW PITCH GAUGE TP14 42

    SCREW PITCH GAUGE TP14 42

    Now: CAD $11.29
    Was: $14.99
    Screw Pitch Gauges Features Made of tempered steel and are precision ground T.P.I. stamped on each blade All blades can be locked to any desired position Number of blades: 30 TPI: 4-42
    B576
    Now: CAD $11.29
    Was: $14.99
    Add to Cart
  • PRECISION MARKING RULE 12IN. INCRA

    Incra

    PRECISION MARKING RULE 12IN. INCRA

    CAD $22.99
    INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE12
    CAD $22.99
    Pre-Order Now
  • PRECISION MARKING RULE 6IN. INCRA

    Incra

    PRECISION MARKING RULE 6IN. INCRA

    CAD $11.99
    INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE06
    CAD $11.99
    Add to Cart
  • DEPTH GAUGE MILESCRAFT

    Milescraft

    DEPTH GAUGE MILESCRAFT

    Now: CAD $7.99
    Was: $8.99
    8601 Depth Gauge - Miles Craft The 8601 allows to quickly and accurately measure, mark or locate blade, bit heights and fence offsets. The large scale markers and view finder allows easy and accurate adjustments and the self standing feature allows a...
    8601
    Now: CAD $7.99
    Was: $8.99
  • DIGITAL REMOTE READOUT 0 24IN. IN/ METRIC

    Igaging

    DIGITAL REMOTE READOUT 0 24IN. IN/ METRIC

    Now: CAD $67.99
    Was: $74.99
    B313624 0-24” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display Magnetic & Clamp hardware on remote...
    B313624
    Now: CAD $67.99
    Was: $74.99
    Add to Cart
  • DIGITAL MULTI GAUGE 0 6IN. INCH/METRIC

    Igaging

    DIGITAL MULTI GAUGE 0 6IN. INCH/METRIC

    CAD $25.99
    B3131 0-6" 3 in1 inch & metric Digital Multi Gauge - Igaging Router Depth / Slot Depth / Welding Thickness  3-in-1 3-Way Measure: Horizontal, Vertical, 90-degree Angle 3-Way Reading:  Inch, Inch Fractional, Metric EZ View: Super Large...
    B3131
    CAD $25.99
    Add to Cart
  • DIVIDER WING WITH CARBIDE SCRIBER

    DIVIDER WING WITH CARBIDE SCRIBER

    Now: CAD $14.50
    Was: $16.99
    B3114 6" Divider with Carbide Scriber This tool combines rigidity, light weight and easy handling and ensures transferring precise angle measurements. the fittings are solid brass with carbide scriber for scribing on metals, wood, plastic, aluminum and...
    B3114
    Now: CAD $14.50
    Was: $16.99
    Add to Cart
  • 12IN. RULER IGAGING

    Igaging

    12IN. RULER IGAGING

    Now: CAD $2.99
    Was: $4.49
    B3129 12" Ruler - Igaging Hardened stainless Steel, satin chrome, 4R scale Adjustable hook can be used on both sides Highly accurate Size: 12"
    B3129
    Now: CAD $2.99
    Was: $4.49
    Add to Cart
  • GAUGE SCREW CUTTING

    Groz

    GAUGE SCREW CUTTING

    Now: CAD $4.69
    Was: $5.99
    Gauge Screw Cutting Made from stainless steel in satin chrome finish. Permanently deep etched graduations Accurate tread profiles 47 - 1/2" degree 14 - 1/2 degree 55 degree and BSF, 60 degree
    B1989
    Now: CAD $4.69
    Was: $5.99
    Add to Cart
  • HOLDER MAG BASE FINE ADJ.

    HOLDER MAG BASE FINE ADJ.

    CAD $26.99
    Magnetic Holder With Fine Adjustment Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|
    B303
    CAD $26.99
    Add to Cart
  • CALIPER DIAL 8IN. 0.001

    CALIPER DIAL 8IN. 0.001

    Now: CAD $43.99
    Was: $51.99
    8" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...
    B10568
    Now: CAD $43.99
    Was: $51.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley