This small but mighty 3” Grinder with Rotary Shaft is great for many applications from grinding to engraving this machine is truly versatile. The rotary shaft allows for great flexibility making it ideal for intricate detailed work polishing or grinding in tight spaces. The grinding and buffing wheels are great for sharpening cutting tools, rough shape material and buffing of your workpieces. CX904 machine uses 1/2” bore.
Power Requirement:120V, Single-Phase, 60 Hz
Full-Load Current Rating: 0.4A Minimum Circuit
Connection Type: Cord & Plug Power
Cord Included: Yes Power Cord Length: 6-1/2 ft.
Plug Included: Yes Included
Plug Type: 5-15
Switch Type: Toggle ON/OFF Switch
Main Type: Induction
Horsepower: 1/4 HP
Speed: 3450 RPM
Power Transfer: Direct Drive
Bearings: Shielded & Permanently Lubricated
Operation Info Right Wheel Type: Aluminum Oxide
Left Wheel Type: Wool Wheel
Bore: 1/2 in.
Wheel Speed at Maximum Wheel Diameter: 3450 RPM
Rotary Shaft Collect Holds 1/8” Diameter Bits
Work Rest: Steel
Eye Shields: Polycarbonate
Product Dimensions: Weight:2.7 Kg (5 lbs.)
Width (side-to-side) x Depth (front-to-back) x Height: 6-3/4 x 5-1/4 x 6-1/4 in.
Footprint (Length x Width): 3-1/4 x 3-1/4 in.
Box Type: Cardboard
Machine Weight: 2.72 Kg (6 lbs.)
Length x Width x Height: 10 x 8 x 7 in.
Very good product
What an awesome little tool! It is great for cleaning and polishing where the low rotation speed and the low power motor is an advantage. When working on smaller parts I have always been aware of how my full size grinder with a felt wheel is something that still presents a demand for absolute care and wouldn't use it to polish a bolt or smaller part, out comes the dremel. This affords a nice surface area for buffing a chisel edge, as well, without taking too much off at once. This little fellow likes to be warm, so I preheat it a little on a cold day as it takes its time getting the revs up. The circuitry prevents it from rotating too fast so that is why it does that.