Description
This lock miter bit gives a strong 90-degree lock miter joint. Run one board vertically and the other end horizontally in one set up. Used only with router table.
SPECIFICATIONS
Diameter: 2"
Cutting Length:: 7/8"
Angle: 45 degrees
Shank Diameter: 1/2"
Total Length: 2-11/16"
Craftex Blue Tornado bits are CNC machined to have perfect balance and leave a smooth finish. All bits are manufactured from 4140 & 5140 steel and are put through a special heat treatment process to ensure proper hardness and tensile strength to prevent bending or breaking. Tungsten micro-grain C3 carbide gives the cutter long-lasting strength that can be sharpened many times over.
Craftex Blue Tornado bits have an anti-kickback design along with a non-stick coating for easy pitch removal. Finished with an automotive semi-transparent finish, to give a long-lasting shine.
All Craftex Blue Tornado router bits and shaper cutters are backed by a limited, life-time warranty.
2 Reviews
-
Lock Miter Bit
I bought this bit with great expectations but after several attempts was not successful in being able to produce a usable joint.
-
Lock mitre bit
Well made bit which performs well, but set up is very tricky. Various YouTubes help, but patience and care required for good results.