LAGUNA I FLUX 10HP CYCLONE DUST COLLECTO

Special Order, allow 6 to 8 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status.

Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines. The pricing listed on our website may not be accurate. Please speak with your Busy Bee Sales representative or call 1-800-461-2879 for more accurate information on pricing and lead time. Prices are subject to change without notice.

The I|Flux:10 Elite Fine Dust Collector delivers 5000 CFM at 6" wc with a 10 HP motor, 409 ft² of filter area and three 64-gallon EZ-Lift waste bins for high-volume fine dust collection.

Built for demanding woodworking environments, the I|Flux:10 Elite combines high airflow with an extensive filtration system designed specifically for fine dust applications. Its 15" inlet delivers a net airflow of 5000 CFM at 6" wc, making it well suited to shops operating equipment such as CNC routers, wide belt sanders and multiple dust-producing machines.

A key feature of the I|Flux:10 Elite is its 409 ft² of filter surface area. The system uses 40 smaller-diameter polyester filter bags to maximize filtration area and maintain airflow. Its positive-pressure design pushes air through the filters while collected dust falls into the waste bins. As fine dust builds on the inside of the filters, it can release into the bins, while the integrated manual shaker helps remove additional caked dust and maintain filter performance.

Three 64-gallon EZ-Lift metal waste bins provide substantial collection capacity and simplify disposal. Raising the release bar disengages the airtight seal so each bin can be rolled away, while 360-degree swivel casters make them easier to move around the shop.

The control panel includes an amperage readout for monitoring motor operation, and a high-frequency remote allows the collector to be switched on or off from up to 60 metres away. A TEFC motor and phase controller provide additional electrical protection, and the supplied product information states that the I|Flux:10 Elite complies with NFPA 664 requirements for wood processing and woodworking facilities.

Features

• 10 HP dust collector designed for high-volume fine dust applications

• Delivers 5000 CFM of airflow at 6" wc

• Large 15" inlet

• 409 ft² of total filter surface area

• 40 smaller-diameter filter bags maximize available filtration area

• Polyester filter bag construction

• Positive-pressure filtration design

• Manual filter shaker helps release caked-on fine dust

• Three 64-gallon EZ-Lift metal waste bins

• Quick-release bin system simplifies waste removal

• 360-degree swivel casters on waste bins for easier movement

• No bag hold-down system required with the positive-pressure design

• Control panel includes amperage readout for monitoring motor operation

• High-frequency remote control with up to 60-metre operating range

• TEFC motor

• Phase controller for added electrical protection

• Designed for applications including CNC router and wide belt sander dust collection

• Supplied product information states compliance with NFPA 664

Specifications

• Product: I|Flux:10 Elite Fine Dust Collector

• Motor: 10 HP

• Motor Speed: 1720 RPM

• Power Requirements: 220V / 60 Hz / 3 Phase

• Amperage: 24.8 Amps

• Airflow: 5000 CFM @ 6" wc

• Inlet Diameter: 15"

• Filter Area: 409 ft²

• Number of Filter Bags: 40

• Filter Bag Diameter: 168 mm

• Filter Bag Height: 1800 mm

• Filter Bag Material: Polyester

• Filter Cleaning: Manual Shaker

• Waste Bins: 3 x 64-Gallon EZ-Lift Metal Bins

• Floor Space (W x L): 3424 x 1140 mm

• Machine Weight: 1069 lbs (485 kg)

• Shipping Weight: 1113 lbs

• Shipping Dimensions (L x W x H): 75" x 39" x 80"

Comes With

• 3 x 64-Gallon EZ-Lift Metal Waste Bins

• High-Frequency Remote Control

FAQ

How much airflow does the I|Flux:10 Elite provide?
The collector delivers 5000 CFM of airflow at 6" wc through its 15" inlet.

What types of applications is the I|Flux:10 Elite designed for?
It is designed for demanding fine dust collection applications. The supplied product information specifically identifies CNC router-based cabinet shops and wide belt sanders as examples of equipment requiring high airflow.

How much filter surface area does the collector have?
The I|Flux:10 Elite provides 409 ft² of total filter surface area using 40 polyester filter bags.

How are the filters cleaned?
The collector uses a manual shaking mechanism to help release dust that has caked onto the filters so it can fall into the waste bins.

How many waste bins are included?
The system uses three EZ-Lift metal waste bins, each with a capacity of 64 gallons.

How are the waste bins removed?
The airtight seal is released by raising the release bar, after which the bin can be rolled away on its swivel casters.

Does the I|Flux:10 Elite include remote control operation?
Yes. A high-frequency remote is included and has a stated operating range of up to 60 metres.

What electrical service does the collector require?
The I|Flux:10 Elite requires 220V, 60 Hz, 3-phase power and is rated at 24.8 amps.

Does the I|Flux:10 Elite comply with NFPA 664?
According to the supplied product information, the I|Flux:10 Elite complies with NFPA 664, the Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities.