OVERARM BLADE GUARD SYSTEM CX-SERIES CXARM

The Craftex CX-Series CXARM Over Arm Blade Guard System helps contain airborne sawdust and small chips directly above the table saw blade. Its clear guard maintains visibility of the cutting area, while the quick-pivoting arm makes it easy to move the guard into position or swing it away when needed.

Built with a solid steel base, the freestanding system can be positioned beside most table saws and includes a support bracket that mounts directly to the saw base for added stability. The adjustable arm provides flexible positioning over the blade and connects to a 4-inch dust collection hose.

The CXARM is ideal for table saws equipped with a riving knife, splitter, or anti-kickback device. For effective dust collection, use it with a 4-inch hose and a dust collector rated at 600 CFM or higher.

Features

• Helps collect small airborne dust particles and chips produced during cutting

• Clear blade guard provides improved visibility of the cutting area

• Quick-pivot action allows the guard to be moved in or out of position

• Floor-standing design fits a wide range of table saw configurations

• Solid steel base construction provides stable support

• Included mounting bracket attaches the unit to the table saw base

• Adjustable arm supports accurate positioning above the blade

• Provides 6-1/2 inches of vertical guard adjustment

• Compatible with standard 4-inch dust collection hose

• Recommended for table saws with a riving knife, splitter, or anti-kickback device

Specifications

• Model: CXARM

• Product type: Over-arm table saw blade guard system

• Dust collection connection: 4 inches

• Recommended dust collector capacity: 600 CFM or higher

• Guard vertical adjustment: 6-1/2 inches

• Arm height, measured from bottom of arm to floor: 46 to 48-3/4 inches

• Arm reach, measured from inside of column to centre of guard: 37 to 65 inches

• Base mount length, measured to inside of column: 46 to 54 inches

• Base construction: Steel

• Country of manufacture: Taiwan

Comes With

• Clear blade guard

• Adjustable over-arm assembly

• Floor-standing steel base

• Table saw mounting bracket

FAQ

What does the CXARM Over Arm Blade Guard System do?

It positions a clear guard above the table saw blade to help improve operator protection and collect small dust particles and chips produced during cutting.

Will this blade guard fit my table saw?

The freestanding, fully adjustable design is made to accommodate a wide range of table saws. Available floor space, saw dimensions, and mounting requirements should be checked against the listed adjustment ranges before installation.

What size dust collection hose does it use?

The CXARM is designed for use with a 4-inch dust collection hose.

What dust collector capacity is recommended?

A dust collector rated at 600 CFM or higher is recommended.

Can the guard be moved out of the way?

Yes. The quick-pivoting arm allows the guard to be moved into position for cutting or swung away when required.

How much vertical adjustment does the guard provide?

The guard provides 6-1/2 inches of vertical adjustment.

What table saw safety equipment should be used with this system?

The CXARM is recommended for table saws equipped with a riving knife, splitter, or anti-kickback device.