Loading... Please wait...
We ship to: 
All Products
Quick Links
- Home
- Woodworking
- BELT/EDGE SANDER 4IN. CRAFTEX
- Home
- Woodworking
- Sanders
- BELT/EDGE SANDER 4IN. CRAFTEX
- Home
- Woodworking
- Sanders
- Sander Belt and Disc
- BELT/EDGE SANDER 4IN. CRAFTEX
BELT/EDGE SANDER 4IN. CRAFTEX
(excluding tax)
Accessories
 |
ABRASIVE CLEANER 1 3/8IN. X 1 3/8IN. X 6IN. 15154 $5.99 $4.79 |
 |
SAFETY GLASSESS B2703 $3.99 |
 |
SANDING BELT 4IN. X 36IN. 100 GRIT B418100 $5.99 |
 |
SANDING BELT 4IN. X 36IN. 120 GRIT B418120 $5.99 |
View All Accessories
Product Description
4" Bench Top Edge Sander
A direct drive motor gives power to a 4" belt sander, which may be used
vertically as an edge sander or flat as a standard belt sander.
An auxiliary table allows the end of the belt to be used as a contour sander.
A 2.5" dust pick up is provided. A truly versatile machine|
Motor: 1/2 HP - 4 AMP, 110V, 3450 RPM with keyed switch
Table Size - Two 12" x 8" cast aluminum tables,
one with a 3/4" mitre gauge slot
Bed Size - 12 1/2" x 4 3/4"
Belt Size - 4" x 36" Quick Release
Belt Speed - 2,200 F.P.M Approx.
Pulley Size for Contour - 21/2"
Overall Height: 20" x 15" x 17"High
Gross Weight - 30 kg
Carton Size - 24" x 18" x 17"
Craftex 2 Year Warranty
Find Similar Products by Category
Product Reviews
-
Good machine not well thought out.
Posted by Collis Watson on 15th May 2012
After getting this machine to replace a larger machine.(downsizing) I found a few areas it could be improved. The dust collecting was a lot to be desired. The dust hood was so close to the belt the dust couldn't get in! The aluminum tables arE not good quality and have been replaced with a larger plywood and laminate. A new dust hood was made with a 4" outlet. Glued a pad of graphite to the metal plate .Runs smoother an quieter.Now it's ready to go. Overall a nice little machine.
-
Solid unit
Posted by Tom on 28th Nov 2011
This sander is more powerful than I would have imagined. Its performed very well since I picked it up and its now been about 5 months. Belts are relatively inexpenisve and they have worked well as well.
Manual wasnt the greatest but overall the machine is solid and has ben a good addition to my shop
-
Nice sander
Posted by James Craig on 28th Nov 2011
Got this little sander for small detail work and have been quite happy with it overall. Out of the box, the tables lined up, everything was square and this sander has adequate power for everything I have thrown at it so far. Have used it mainly for metal sanding and some wood. Overall the construction is solid and a good sander for the price.
-
slightly dissapointed..
Posted by Andrew Coholic on 17th Nov 2011
I have purchased a number of Craftex branded tools over the past several years. Generally I am quite happy. I ordered this small edge sander mainly to work on small metal pieces, and didnt expect perfection - however it is below my expectations, even at the sale price.
The steel stampings are rough, welds are rough and the two tables are very poorly made. If I could have looked at the sander before buying (I mail order) I wouldnt have bought it for 1/2 the price. I think there are better sanders out there in this price point.
That being said, I made a new table for it from 3/4 PB with laminate on both sides, and that should make it at least useable. The belt tracking is fine, and the motor appears to have enough power.
It is just the overall quality that is poor in my opinion.
