null

Router Accessories

Router Accessories

  • CAST IRON TABLE INSERT FOR 36IN. PCS RT

    CAST IRON TABLE INSERT FOR 36IN. PCS RT

    CAD $219.00
    ****SPECIAL ORDER PLEASE ALLOW 2 TO 4 WEEKS FOR DELIVERY*** Complete your 36" Professional In-Line Router Table configuration with this beautiful Intermediate Cast Iron Wing. When installed, it completes a full cast table from left to...
    RTICW
    CAD $219.00
    Add to Cart
  • DUST COLLECTION BOX FOR ROUTER TABLES CR

    Craftex CX Series

    DUST COLLECTION BOX FOR ROUTER TABLES CR

    Now: CAD $129.00
    Was: $169.00
    Router tables have been known for being difficult to gather dust from. This dust collection box goes a long way to fixing that. The metal box surrounds the router, containing the dust that usually falls below the table. The included Y-fitting allows a 4"...
    CXRDUST
    Now: CAD $129.00
    Was: $169.00
    Add to Cart
  • 10 PCS BRASS ROUTER BUSHING SETS

    10 PCS BRASS ROUTER BUSHING SETS

    Now: CAD $29.99
    Was: $46.99
    B3939 10 PCS BRASS ROUTER BUSHING SETS Expand the capability of your router with this 10 piece brass bushing set. Use your router as a precision cutting machine for duplicating patterns, cutting signs, creating dovetails, or any other project...
    B3939
    Now: CAD $29.99
    Was: $46.99
    Add to Cart
  • METAL BUSHING SET MILESCRAFT

    METAL BUSHING SET MILESCRAFT

    CAD $39.99
    1228 The Milescraft metal bushing set is comprised of seven carbon steel one-piece bushings, two locknuts, and one top hat adaptor. The router bushings have outer diameters of 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", and 51/64". This router...
    1228
    CAD $39.99
    Add to Cart
  • ROUTER COLLET EXTENDER 1/2IN. B3667

    ROUTER COLLET EXTENDER 1/2IN. B3667

    Now: CAD $29.99
    Was: $31.99
    B3667 It's often impossible to raise a router bit high enough on table mounted routers so the addition of a router collet extension to your setup makes it possible on 1/2" collet routers. (Wrenches are not included.) Specifications: 1/2" shank 1/2"...
    B3667
    Now: CAD $29.99
    Was: $31.99
  • ROUTER SPEED CONTROL 115V 15A

    ROUTER SPEED CONTROL 115V 15A

    CAD $69.99
      This unit provides full variable speed control on your single speed router or laminate trimmer. This control is equipped with a 3 position switch that allows you to operate your router at full speed or variable speed settings, as well as control...
    B1850
    CAD $69.99
    Pre-Order Now
  • ALUMINUM ROUTER TABLE INSERT PLATE 9IN. X12

    ALUMINUM ROUTER TABLE INSERT PLATE 9IN. X12

    CAD $85.00
    B3494 Aluminum Router Table Plate Insert Our 1/4" thick aluminum router table insert will support the heaviest of routers, without plate sag. The plate is about 9" x 12" and includes levelling screws and magnets to secure the plate in the table...
    B3494
    CAD $85.00
    Add to Cart
  • DELUXE FEATHER BOARD WITH T SLOT HOLDER

    DELUXE FEATHER BOARD WITH T SLOT HOLDER

    CAD $17.99
    B3260 Retrofit Featherboard Kit with T-slot Holder Featuring two T-slot locking nuts with knobs, this high quality retrofit feather kit quickly attaches to your working surfaces and stays put when the knobs are tightened. Great for router tables,...
    B3260
    CAD $17.99
    Add to Cart
  • FEATHER BOARD SAFETY 5 PC SET

    FEATHER BOARD SAFETY 5 PC SET

    CAD $25.99
    B3276 5pc Featherboard Safety Set The 5-piece shop safety kit allows you to keep your hands safe from table saw, router table, shaper table and jointer while operation. INCLUDES two push stick one push block one notch stick one featherboard
    B3276
    CAD $25.99
    Add to Cart
  • TEMPLATE GUIDE KIT 10PC SET METRIC THRD

    TEMPLATE GUIDE KIT 10PC SET METRIC THRD

    Now: CAD $54.99
    Was: $64.99
    B2053 10-pc Router Template Guide Kit Solid brass One adapter and two locknuts Seven different template guides 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" and 51/64" The ID values are: 1/4", 9/32", 11/32", 13/32", 17/32", 21/32" and 5/8" The length...
    B2053
    Now: CAD $54.99
    Was: $64.99
    Add to Cart
  • SIGN PRO SIGN MAKING JIG MILESCRAFT

    Milescraft

    SIGN PRO SIGN MAKING JIG MILESCRAFT

    CAD $107.00
    New Sign Pro - MilesCraft The Sign Pro has the improved features of Sign Crafter and is by far MilesCraft's best sign making jig. Easily create up to 36" long signs that are professional looking and less time consuming. To increase the stability, the...
    1212
    CAD $107.00
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/8IN.

    SLICK PLATE 36IN. X 4IN. X 1/8IN.

    CAD $9.99
    UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...
    B237718
    CAD $9.99
    Add to Cart
  • EDGE GUIDE FOR ALL DEWALT ROUTERS

    EDGE GUIDE FOR ALL DEWALT ROUTERS

    CAD $59.00
    DW6913 Edge Guide For All Dewalt Routers Straight guide with fine fence adjuster for precision positioning of the parallel fence Attaches to standard shop vacuum cleaners (1-1/4", 1-3/8" and 1-1/2") For use with all DEWALTr routers
    DW6913
    CAD $59.00
    Pre-Order Now
  • SWING STOP KREG

    Kreg

    SWING STOP KREG

    CAD $47.99
    KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.
    KMS7801
    CAD $47.99
    Add to Cart
  • TEMPLATE GUIDE 11/32 X 7/16 INCH

    TEMPLATE GUIDE 11/32 X 7/16 INCH

    CAD $7.99
    Template Guide This template guide will fit Black & Decker, DeWalt, Freud, Hitachi, Porter Cable, Skil, and any other router with a 1 3/16" centre hole. Outside Dia: 7/16" Inside Dia: 11/32" Guide Height: 5/32"
    B2422
    CAD $7.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/2IN.

    SLICK PLATE 36IN. X 4IN. X 1/2IN.

    CAD $26.99
    B237712 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router ...
    B237712
    CAD $26.99
    Add to Cart
  • BASE PLATE/BUSHING SET

    Milescraft

    BASE PLATE/BUSHING SET

    CAD $31.99
    1201 Baseplate/Bushing Set - MilesCraft Forget fumbling with tiny bolts and screwdrivers. The TurnLock™ concept turns changing guide bushings, and installing router attachments, into a simple matter of a 1/4 twist.  Just align the TurnLock™ bushing...
    1201
    CAD $31.99
    Add to Cart
  • TEMPLATE GUIDE 17/32IN. X 5/8IN.

    TEMPLATE GUIDE 17/32IN. X 5/8IN.

    CAD $7.99
    Template Guide This template guide will fit Black & Decker, DeWalt, Freud, Hitachi, Porter Cable, Skil, and any other router with a 1 3/16" centre hole. Outside Dia: 5/8" Inside Dia: 17/32" Guide Height: 9/16"
    B2427
    CAD $7.99
    Add to Cart
  • ROUTER BIT DEPTH GAUGE

    ROUTER BIT DEPTH GAUGE

    Now: CAD $6.99
    Was: $7.99
    Router Bit Depth Gauge You're all set to rout V-groove into a piece of expensive stock. How can you be sure the depth you've set is the depth the router will cut? Simple. Check it with this handy router depth gauge. The guide is clearly marked in 16ths...
    B1309
    Now: CAD $6.99
    Was: $7.99
  • SLICK PLATE 36IN. X 3/4IN. X 3/8IN.

    SLICK PLATE 36IN. X 3/4IN. X 3/8IN.

    CAD $11.99
    B2378 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits...
    B2378
    CAD $11.99
    Add to Cart
  • PRECISION ROUTER TABLE INSERT LEVELERS

    PRECISION ROUTER TABLE INSERT LEVELERS

    CAD $28.99
    PRS3040 Precision Router Table Insert Plate Levellers - KREG 8 adjustable points of contact Four-corner lock-downs Locating tabs for easy installation Package includes 4 Insert Plate Levellers Designed for 3/4" corner radius Works with router tables up...
    PRS3040
    CAD $28.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/4IN.

    SLICK PLATE 36IN. X 4IN. X 1/4IN.

    CAD $15.99
    UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...
    B237714
    CAD $15.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley