Layout and Marking Tools

Layout and Marking Tools

  • LEVEL TORPEDO STLE TACTIX

    LEVEL TORPEDO STLE TACTIX

    Now: $4.50
    Was: $5.99
    B3651 The Tactix Torpedo Level is not only compact and will fit nicely in your tool belt but is equipped with 3 spirit vials at 0°, 45°, 90°, and a handy magnetic base allowing for hands free leveling and installation of the work piece...
    253005
    Now: $4.50
    Was: $5.99
    Add to Cart
  • IGAGING 0 6IN. DIGITAL CALIPER

    Igaging

    IGAGING 0 6IN. DIGITAL CALIPER

    Now: $74.99
    Was: $109.99
    B3487 0 - 6" Digital Calliper - iGaging Built in smart wireless data connectivity for smart phone and tablet Auto shut-off Ultra measure speed Ultra speed movement Hardened stainless steel
    B3487
    Now: $74.99
    Was: $109.99
    Add to Cart
  • ANGLE CUBE DIGITAL SENSOR LEVEL IGAGING

    Igaging

    ANGLE CUBE DIGITAL SENSOR LEVEL IGAGING

    Now: $54.99
    Was: $59.99
    B3476 Angle Cube Digital Sensor Level - iGaging Portable digital angle gauge with magnetic base feature rich, smaller and lighter than ever before! get precise angle readings. Large LCD display reads upright at any angle. Digital angle...
    B3476
    Now: $54.99
    Was: $59.99
    Add to Cart
  • SPRING DIVIDER 6IN. 3 PC SET

    SPRING DIVIDER 6IN. 3 PC SET

    Now: $9.99
    Was: $11.99
    B3385 3 Piece, 6" Caliper and Divider Set Includes divider and both inside and outside calipers Carbon steel with hardened fulcrum spring and points 3 Piece Set
    B3385
    Now: $9.99
    Was: $11.99
    Add to Cart
  • MEASURING TAPE 3/4IN. X 16FT

    MEASURING TAPE 3/4IN. X 16FT

    Now: $5.99
    Was: $8.99
    B3310 16ft, 3/4" Measuring Tape Featuring a strong polycarbonate case with rubber grip, calibrated inch and metric measurements and one hand tape position holder for desired convenience.  Standout - 16 ft Tape lock Belt clip
    B3310
    Now: $5.99
    Was: $8.99
    Pre-Order Now
  • MARKING GAUGE B2455

    MARKING GAUGE B2455

    Now: $29.99
    Was: $45.00
    Marking Gauge This handy tool eliminates the many problems associated with standard marking gauges. The sharpened steel cutter slices a line instead of scratching like pin marking gauges. The 7" steel shaft is marked in 1/16ths and the body is...
    B2455
    Now: $29.99
    Was: $45.00
    Add to Cart
  • OUTSIDE CALIPER 12IN.

    Groz

    OUTSIDE CALIPER 12IN.

    $16.99
    Outside Calipers 12" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish
    B591
    $16.99
    Add to Cart
  • EDGE AND CENTRE FINDER 1/2IN. DIA

    Groz

    EDGE AND CENTRE FINDER 1/2IN. DIA

    Now: $11.50
    Was: $12.99
    B568 Edge and Centre Finder -GROZ Edge and Center Finders are time saving positioning tools for use on jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, center points & scribed lines. Diameter:...
    B568
    Now: $11.50
    Was: $12.99
    Add to Cart
  • COMBINATION SQUARE

    COMBINATION SQUARE

    Now: $75.99
    Was: $82.99
    Combination Square Set Precision combination squares of high quality cast iron with 12" tempered blade in frosted chrome finish. Includes square centre head and protractor.
    220850
    Now: $75.99
    Was: $82.99
    Add to Cart
  • DIGITAL LEVEL BOX CRAFTEX

    Craftex

    DIGITAL LEVEL BOX CRAFTEX

    Now: $24.99
    Was: $34.99
      CT189 Craftex Digital Level Box Angle Sensor Technology Finds the angle on any surface (table saw, mitre saw and more) "Zero" button to determine the angle change from initial measurement Large display screen provides easy digital reading...
    CT189
    Now: $24.99
    Was: $34.99
    Add to Cart
  • DIAL BORE GAUGE 2 6IN.

    Igaging

    DIAL BORE GAUGE 2 6IN.

    Now: $105.00
    Was: $115.00
    B3149 2" to 6" Dial Bore Gauge - iGaging This is a precision dial bore gauge set from iGaging for precise measurement of cylinder bores, main caps, and connecting rods. Easy to Use and Read Super Precision Deep Bore Gauge Extension Holder Measures...
    B3149
    Now: $105.00
    Was: $115.00
    Pre-Order Now
  • HINGE BIT SET 3PCS NO. 4 NO. 6 NO. 8 MILESCRAFT

    Milescraft

    HINGE BIT SET 3PCS NO. 4 NO. 6 NO. 8 MILESCRAFT

    $17.99
    2317 Hinge Bit Set #4, #6 and #8 - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Sizes: 5/64", 7/64", 9/64" Screw compatibility: #3, #4, #5, #6, #8 & #10
    2317
    $17.99
    Add to Cart
  • HINGEMARK

    HINGEMARK

    $25.99
    HINGEMARK This revolutionary new product is the latest innovation for fast, efficient and 100% accurate installation of hinges. Prior research has identified time savings of up to 67% using HINGEMARKO. No more time consuming measuring involved - just...
    B2734
    $25.99
    Add to Cart
  • ROUTER BIT SET LONG REACH CORE BOX SET

    Milescraft

    ROUTER BIT SET LONG REACH CORE BOX SET

    $25.99
    Long Reach Router Bits, from Milescraft Ideal for use with Sign Making Tungsten Carbide Tipped for a durable long lasting bit. 2 -3/8" overall length is ideal for sign making. 1/4", 3/8", and 1/2" core box bits with 1/4" shank 1/4" bit for 1.5" letter...
    2210
    $25.99
    Add to Cart
  • EDGE FINDER

    Groz

    EDGE FINDER

    $9.99
    B567 Edge Finder - GROZ Edge and Center Finders are time saving positioning tools for use on jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, center points & scribed lines.
    B567
    $9.99
    Pre-Order Now
  • ANGLE FINDER MULTI PURPOSE ALUMINIUM

    ANGLE FINDER MULTI PURPOSE ALUMINIUM

    Now: $24.99
    Was: $37.50
    Angle Finder (Professional) Anodized aluminum construction with stainless steel pivots ensures strength and durability of the angle finder. The horizontal scale is 20" long and the rotating scale is 9" long and a plastic pouch is included for storage. ...
    B1730AL
    Now: $24.99
    Was: $37.50
    Add to Cart
  • PRECISION MARKING RULE 6IN. INCRA

    Incra

    PRECISION MARKING RULE 6IN. INCRA

    Now: $10.99
    Was: $11.99
    INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE06
    Now: $10.99
    Was: $11.99
    Add to Cart
  • 6IN. PRECISION DOUBLE SQUARE IGAGING

    Igaging

    6IN. PRECISION DOUBLE SQUARE IGAGING

    Now: $26.99
    Was: $29.99
    B3134 6" Precision Double Square - Igaging Graduate in 8ths, 32nds and 64ths Precision Ground Satin Chrome Blades US Standard Size: 6"
    B3134
    Now: $26.99
    Was: $29.99
    Add to Cart
  • 1 2 3 BLOCK

    1 2 3 BLOCK

    $25.99
    Precision Ground 1-2-3 Blocks A must for a good machine shop Very handy for precision layout work| Hardened and ground surface. Blocks are matched to .0001" per inch Measures: 1" x 2" x 3"
    B653
    $25.99
    Add to Cart
  • CABINET MATE 1/4IN. MILESCRAFT

    Milescraft

    CABINET MATE 1/4IN. MILESCRAFT

    Now: $22.99
    Was: $26.99
    1316 CabinetMate - Milescraft Ever wonder how to make level, wobble-free cabinet shelves? The Milescraft CabinetMate"! is just the tool to get the job done. This easy to use, lightweight and durable jig is a great alternative to shop made jigs, which...
    1316
    Now: $22.99
    Was: $26.99
    Add to Cart
  • V BLOCK ULTIMATE

    Groz

    V BLOCK ULTIMATE

    Now: $59.99
    Was: $72.99
    The Ultimate V-Block Here is an improved V-Block. It can be used on its base, on its end or flat on either side and an adjustable side screw with caps is provided to support the V-Block. The block also has 4 tapped holes, two in the base and one on each...
    B026
    Now: $59.99
    Was: $72.99
    Add to Cart
  • SPRING DIVIDER 6IN.

    Groz

    SPRING DIVIDER 6IN.

    Now: $5.69
    Was: $7.99
    Spring Calipers 6" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B1241
    Now: $5.69
    Was: $7.99
    Add to Cart
  • SQUARE DRIVER 3IN. AND 6IN. NO. 2 COMBO KREG DDS

    Kreg

    SQUARE DRIVER 3IN. AND 6IN. NO. 2 COMBO KREG DDS

    $6.99
    DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems - KREG 3-Inch and 6-Inch Driver Set gives you choices. The Deep 2 Driver recess resists cam-out and comes in the 3-inch and 6-inch length set. The 3-inch...
    DDS
    $6.99
    Add to Cart
  • PRECISION MARKING RULE 12IN. INCRA

    Incra

    PRECISION MARKING RULE 12IN. INCRA

    Now: $19.99
    Was: $20.99
    INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE12
    Now: $19.99
    Was: $20.99
    Add to Cart
  • CALIPER JENNY 6IN.

    Groz

    CALIPER JENNY 6IN.

    $6.99
    Jenny 6" Caliper Made from carbon steel with friction fit joint. Adjustable hardened point.
    B2111
    $6.99
    Add to Cart
  • INSIDE CALIPER 8IN.

    Groz

    INSIDE CALIPER 8IN.

    $12.99
    Inside Calipers 8" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish
    B584
    $12.99
    Add to Cart
  • EDGE FINDER DOUBLE

    Groz

    EDGE FINDER DOUBLE

    $11.99
    B569 Edge Finder Double - GROZ Edge and Center Finders are time saving positioning tools for use on jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, center points & scribed lines.
    B569
    $11.99
    Add to Cart
  • CENTRE SQUARE

    Groz

    CENTRE SQUARE

    $15.99
    Centre Square Designed for fast and accurate location of the centre of the face of a round bar or disc. Tool quality alloy steel and the blade is hardened and tempered. This is a useful square for machinists and tool makers. Max. work diameter: 1 1/2"
    B1879
    $15.99
    Add to Cart
  • OUTSIDE CALIPER 4IN.

    Groz

    OUTSIDE CALIPER 4IN.

    $6.99
    Outside Calipers 4" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B582
    $6.99
    Add to Cart
  • SPRING DIVIDER 10IN.

    Groz

    SPRING DIVIDER 10IN.

    $14.99
    Spring Calipers 10" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B586
    $14.99
    Add to Cart
  • OUTSIDE CALIPER 6IN.

    Groz

    OUTSIDE CALIPER 6IN.

    $7.99
    Outside Calipers 6" Easy adjustment over entire range Centrally located adjustment screw Balanced legs Uniform tension Polished natural steel finish Order Yours Today|
    B1243
    $7.99
    Add to Cart
  • CALIPER D/ENDED INSIDE/OUTSIDE 6IN.

    CALIPER D/ENDED INSIDE/OUTSIDE 6IN.

    $18.99
    6" Caliper D/Ended Inside/Outside Excellently crafted double-ended wood working calipers with black finish, brass fittings and rust resistant. With the aide of this caliper you can transfer measurements from one end to the another.
    B26798
    $18.99
    Add to Cart
  • SPRING DIVIDER 4IN.

    Groz

    SPRING DIVIDER 4IN.

    $6.99
    B580 4" Spring Divider - GROZ This 4" spring divider features polished, natural steel finish legs which are carefully balanced. The centrally adjustment screw can be easily adjusted over the entire range and gives a smooth and precise action. Opens:...
    B580
    $6.99
    Add to Cart
  • CENTER FINDER WOODWORKING

    CENTER FINDER WOODWORKING

    Now: $3.99
    Was: $5.99
    Centre Finder Finds exact centres in seconds. No calculations. Gives centre of round, square, hexagon and octagon stock for turning in lathe or other purposes. Maximum 8" circle and octagon: 8" square: 5 3/4" hexagon.
    B1246
    Now: $3.99
    Was: $5.99
    Add to Cart
  • STEEL SQUARE 4IN.

    Groz

    STEEL SQUARE 4IN.

    Now: $6.99
    Was: $9.99
    4" Steel Square Made of finest tool steel hardened and tempered. Squares have true right angles, both inside and outside. Beams and blades are ground and lapped for straightness and parallelism.
    B617
    Now: $6.99
    Was: $9.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley