null

Air Tools

Air Tools

  • Grip Tools

    5 PC AIR BLOW GUN KIT

    Now: CAD $8.99
    Was: $10.99
    These special brass nozzles are for blowing out hard to reach areas around moldings, transmissions, electric motors, and are great for many other applications. Includes - 1pc air blow gun, 1 pc tapered rubber tip, 3 pc nozzles.
    B3841
    Now: CAD $8.99
    Was: $10.99
    Add to Cart
  • DeWalt

    DEWALT 18G CROWN STAPLER 1/4IN.

    CAD $149.00
    The DEWALT DWFP1838 18-Gauge narrow crown stapler is ideal for most finish or trim nailing applications. The DWFP1838 is backed by a DEWALT 7-year limited warranty for added peace of mind. This kit includes stapler, fasteners, case, 1/4 in. fitting, belt...
    DWFP1838
    CAD $149.00
    Add to Cart
  • ROK

    1.60 GAL 0.65 HP ULTRA QUIET COMPRESSOR

    Now: CAD $129.00
    Was: $149.00
    This ultra quiet compressor is a great addition to any shop or on the go contractor’s arsenal of tools. This small yet powerful unit boasts a 0.65 HP 110V 5.5 Amp motor that runs at a surprisingly low noise level of 48 dB. Equipped with a regulated...
    B3837
    Now: CAD $129.00
    Was: $149.00
    Add to Cart
  • Makita

    MAKITA BRAD NAILER 2IN. 18 GA

    CAD $119.00
    AF506 Features Slim Contact Tip Design For Precise Woodworking Fastening Applications. The Slim contact tip design enables precise fastening in wood trim, crown moulding, baseboard, casing, cabinetry and other woodworking applications! Features: Air...
    AF506
    CAD $119.00
    Add to Cart
  • Stanley

    STAPLES HEAVY DUTY 1/4IN.

    Now: CAD $7.99
    Was: $10.99
    TRA7045C STAPLES HEAVY DUTY 1/4" For heavy duty stapling jobs such as insulation, carpet under laying and roofing felt. Fits Stanley staplers models #TR100, TR200, TRE500, PHT150, PHT250 and Arrow model #T50
    TRA7045C
    Now: CAD $7.99
    Was: $10.99
    Add to Cart
  • Porter Cable

    COMPRESSOR OIL FREE PORTER CABLE

    CAD $229.00
    PORTER-CABLE C2002 Oil-Free UMC Pancake Compressor Compact portable and easy to use, the Porter-Cable C2002 150-PSI, 6 gallon pancake compressor packs a big punch in a small package. This compressor features an induction motor that provides long life...
    C2002
    CAD $229.00
    Add to Cart
  • ROK

    50 FT HYBRID AIR HOSE 1/4IN.

    Now: CAD $17.99
    Was: $21.99
    B3545 1/4", 50 Feet Hybrid air Hose Lightweight and easy to handle Extremely flexible, easy to coilLays flat Kink resistantReinforced bend restrictors to prolong life of the hoseIdeal for cold weather down to -40 cMaximum pressure: 300 psi1/4" npt...
    B3545
    Now: CAD $17.99
    Was: $21.99
    Add to Cart
  • Makita

    MAKITA COMPRESSOR 1GL 1/6HP 125PSI 1.8A

    CAD $229.00
    AC001 Compact Air Compressor - MAKITA Compressors are workhorse tools on the job site and in the work shop. Makita compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance. The new AC001...
    AC001
    CAD $229.00
    Add to Cart
  • Fuji Spray

    HVLP 30FT SUPER DUTY AIR HOSE FUJI

    CAD $99.99
    7073 HVLP 30 Feet Super Duty Air Hose - FUJI 30 feet in length which includes a 3' of Heat Hose. Also includes a Brass Quick-Connect and Air-Control Valve. Great Performance and High Quality.
    7073
    CAD $99.99
    Pre-Order Now
  • DeWalt

    DEWALT 1.6HP 200 PSI 15GAL. COMPRESSOR

    CAD $499.00
    D55168 1.6 Hp Continuous, 200 Psi, 15 Gallon Workshop Compressor - DEWALT 5.0 SCFM @ 90 PSI allows for quick compressor recovery times 200 PSI max tank storage pressure allows for longer air tool run times 78 dBA (tested per ISO3744) operational...
    D55168
    CAD $499.00
    Add to Cart
  • DeWalt

    DEWALT 6 GAL. 165 PSI PANCAKE COMPRESSOR

    CAD $249.00
    DWFP55126 Heavy Duty 165 Psi Pancake Compressor - DEWALT 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump, enable long tool run time with quick recovery High efficiency motor for easy start up in cold weather or extension...
    DWFP55126
    CAD $249.00
    Pre-Order Now
  • ROK

    HVLP SPRAY GUN W/REGULATOR

    CAD $45.00
    B3452 HVLP Spray Gun with Regulator Fast working speed and wide fan pattern High transfer efficiency means reduced spray mist Stainless steel needle and fluid tip allows use with water based paints 0.6L aluminum paint cups SPECIFICATION: 0-140 PSI Air...
    B3452
    CAD $45.00
    Add to Cart
  • ROK

    2IN. BRAD NAILER 18GA

    CAD $27.99
    B3450 2" Brad Nailer 18 Gauge Uses standard 5/8" - 2", 18 Gauge brad nails Lightweight aluminum die-cast body Cushion grip Lightweight Plastic Magazine 360° Adjustable Exhaust Quick Release Nosepiece Contact Safety
    B3450
    CAD $27.99
    Add to Cart
  • PREMIUM OIL 40Z

    CAD $5.99
    PREMOIL40Z 4Oz Pneumatic Air Tool Lubricant Oil 4oz Pneumatic Air Tool Lubricant Oil Bostitch Nailer & Stapler Accessories
    PREMOIL40Z
    CAD $5.99
    Add to Cart
  • Fuji Spray

    FUJI 600CC NYLON GRAVITY CUP ASSEM.T MOD

    CAD $59.99
    9860 600cc Nylon Gravity Cup for T75-G The lid has been designed so a gasket is not required to provide an excellent seal This cup assembly is offered with the pressure tube and check valve WEIGHT: 0.6lb / 0.25kg
    9860
    CAD $59.99
    Add to Cart
  • Fuji Spray

    FUJI FILTERS MINI MITE PLATINUM NEW

    CAD $9.99
    72242 Filters Mini Mite Platinum Series - FUJI SPRAY These Turbine filters fit the Mini-Mite Platinum Turbines only. These Mini-Mite Platinum Series filters are sold in a 2-pack and have the shape of a hand, rather than a square.
    72242
    CAD $9.99
    Pre-Order Now
  • Fuji Spray

    FUJI HEAT HOSE 3FT.

    CAD $39.99
    7055 3 Feet Heat Hose - FUJI Hose will benefit by easily doubling the useful life of your hose. Most HVLP turbine generate excessive heat on the main hose to turbine connection. The constant on and off creates the inherit problem of the hose cracking...
    7055
    CAD $39.99
    Pre-Order Now
  • Fuji Spray

    FUJI CARRY CASE AIRCAP SETS

    CAD $15.99
    5137 Carry Case for Aircap sets - FUJI SPRAY Keep your Aircap sets neatly in one place. Our Aircap set Carry Case can store 4 sets of Needles, Nozzles and Aircaps. The T-Series (Part 5100-) and the M-Series (Part 7020-) will fit into this case
    5137
    CAD $15.99
    Pre-Order Now
  • Campbell Hausfeld

    COMPRESSOR VERTICAL CAST IRON 60 GALLON VT6195

    Now: CAD $869.00
    Was: $899.00
    VT6195 10.2 CFM 3.7 HP 230-Volt 1 PH (VT6195) 60 Gal. Electric Vertical Single-Stage Stationary Air Compressor The Campbell Hausfeld 60-Gal., 3.7 HP, vertical air compressor (VT6195) is ideal for a small shop, automotive enthusiast or serious DIY user...
    VT6195
    Now: CAD $869.00
    Was: $899.00
  • DeWalt

    STAPLES 18G 1 1/8IN. X 7/32IN. 3000PK

    CAD $16.99
    SX5035118G 1 1/8 inch. Galvanized Coated Staples Chisel point For use with S32SX, T31-3SX5035 & T28-5 T40SX-CT, SX150K-1 and SB150SX 7/32" x 18-ga. narrow Crown Quantity per Box: 3M
    SX5035118G
    CAD $16.99
    Add to Cart
  • DeWalt

    STAPLES 18G 1 1/4IN. X 7/32IN. 3000PK

    CAD $18.99
    SX5035114G 1-1/4" by 18 Gauge by 7/32" Narrow Crown Finish Staple Rugged, coated finish which strengthens, and protects the nail from rust, and decay Galvanization provides consistent high performance Fits Bostitch models: SX1838K, SX150K-1, SB-150SX,...
    SX5035114G
    CAD $18.99
    Pre-Order Now
  • DeWalt

    STAPLES 18G 1 1/2IN. X 7/32IN. 3000PK

    CAD $18.99
    SX5035112G 1-1/2" by 18 Gauge by 7/32" Crown Finish Staple Crown staples for use with the Bostitch S32SX, SX150 and T40SX-CT 18 gauge 1-1/2'' Galvanize steel 3,000 per pack
    SX5035112G
    CAD $18.99
    Add to Cart
  • DeWalt

    HEADLESS PIN 23G 1 3000PK

    CAD $10.99
    PT23303M 1-3/16-Inch 23 Gauge Pin (3000 per Box) Highly durable and easy to use Pack of 1-3/16-inch 23 gauge headless pins Chisel point pins; finish coated For use in the Bostitch HP118K and TU-216-2330 headless pinners Packaged in box of 3000 For Use...
    PT23303M
    CAD $10.99
    Add to Cart
  • DeWalt

    HEADLESS PIN 23G 1I 3000PK

    CAD $9.99
    PT23253M 1" 23 Gauge Headless Pin, 3000 per Box Pack of 23-gauge headless pins for use with the Bostitch HP118k and TU-216-2330 headless pinners Chisel point pins; finish coated Coated finish protects against damage Package includes 3000 pins Pins are...
    PT23253M
    CAD $9.99
    Add to Cart
  • DeWalt

    HEADLESS PIN 23G 3 3000PK

    CAD $7.99
    PT23193M 3/4" 23 Gauge Pin, 3000/Box Pack of 3/4-inch 23 gauge pins Coated finish protects against damage For use with the Bostitch HP118K and TU-216-2330 Headless Pinners Packaged in box of 3000 For Use in the Bostitch HP118K and TU-216-2330...
    PT23193M
    CAD $7.99
    Add to Cart
  • DeWalt

    PRECISION POINT 16GA FINISH NAILER KIT

    CAD $229.00
    DWFP71917 16 Gauge Precision Point Finish Nailer - DeWalt Precision Point™ Technology: Easy nail placement as a result of a smaller nose compared to current DEWALT nailers and no need to compress the contact trip to actuate the toolDrives...
    DWFP71917
    CAD $229.00
    Add to Cart
  • DeWalt

    PRECISION POINT 18GA BRAD NAILER KIT

    CAD $149.00
    DWFP12233 18 GA Precision Point Brad Nailer - DeWalt Precision Point™ Technology: Precise nail placement as a result of a smaller nose compared to current DEWALT nailers and no need to compress the contact trip to actuate the toolDrives 18 GA...
    DWFP12233
    CAD $149.00
    Add to Cart
  • STAPLES CROWN 10MM X 16MM 5000 PC FOR CX

    Now: CAD $4.89
    Was: $12.99
    CX902T16 10.6mm Crown x 16mm Leg Collated Staples (5000 pcs) Staples for CX902 Air Stapler 10.6mm Crown 16mm Leg Qty: 5000 pcs
    CX902T16
    Now: CAD $4.89
    Was: $12.99
    Add to Cart
  • STAPLES CROWN 10MM X 10.6MM 5000 PC FOR

    Now: CAD $3.49
    Was: $12.99
    CX902T10 10.6mm Crown x 10mm Leg Collated Staples (5000 pcs) Staples for CX902 Air Stapler 10.6mm Crown 10mm Leg Qty: 5000 pcs
    CX902T10
    Now: CAD $3.49
    Was: $12.99
    Add to Cart

Air Tools

Air tools and air compressors are an integral part of any major renovation or construction project. You need to have the proper pneumatic tools and air tools accessories handy in order to get the big jobs accomplished.

Busy Bee Tools has an extensive selection of air compressors and air tools equipment, including all types of nailers and staplers, perfect for carpentry and roofing jobs. If the job includes outdoor painting or spray staining, you'll find the spray systems you need for deck staining, waterproofing and fence painting. Don't forget about those air compressors; You'll find every size and type in stock, from vertical tanks, garage air compressors and industrial air compressors.

Count on Busy Bee Tools for the air tools and air tools accessories you need, whether for a large scale contracting job, or for those weekend do-it-yourself jobs. We have the air tools that will make your tough jobs a breeze.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley