null

Routers

Routers

  • 3 1/4 PLUNGE ROUTER FELISATI

    Felisatti

    3 1/4 PLUNGE ROUTER FELISATI

    CAD $299.00
    3-1/4 HP - 15 AMP plunge base router with variable speed between 12,000 and 21,000 RPM. An electronic soft-start offers better control from start to finish. The large micro-adjustment knob simplifies precision bit settings - even when mounted under a...
    RF622200
    CAD $299.00
    Add to Cart
  • SAW STOP FOUR POST ROUTER LIFT WITH LOCK

    SAWSTOP

    SAW STOP FOUR POST ROUTER LIFT WITH LOCK

    CAD $715.00
    Built for heavy-duty precision, the SawStop Router Lift features a chain-synchronized four-post lifting system, positive lock, precision above-table elevation measurement and adjustments, and adaptive collars to fit multiple router sizes. 9.25" x 11.75"...
    RTLFT
    CAD $715.00
    Add to Cart
  • SAW STOP DOWNDRAFT DUST COLLECTION BOX

    SAWSTOP

    SAW STOP DOWNDRAFT DUST COLLECTION BOX

    CAD $249.00
    Engineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangeable panels for optimum dust port and Vent placement. Plug the 2...
    RTDCB
    CAD $249.00
    Add to Cart
  • LEVEL LOC REDUCING RINGS 5PCS SET KREG

    LEVEL LOC REDUCING RINGS 5PCS SET KREG

    CAD $31.25
    This five-piece set of Level-Loc Reducing Rings fits the Kreg Precision Router Table Insert Plate, as well as Precision Router Table Lift, allowing you to customize the size of the opening around the bit. The set includes rings with 3/4in., 1 3/8in., 1...
    PRS3050
    CAD $31.25
    Add to Cart
  • SAW STOP 30IN. IN LINE CAST IRON ROUTER

    SAWSTOP

    SAW STOP 30IN. IN LINE CAST IRON ROUTER

    CAD $1,154.00
    Optimize your SawStop saw with this In-Line Router Table Assembly. On a Professional Cabinet Saw, replace your extension table with beautiful cast iron. On a Professional or Contractor Saw, install to the left of the saw. Includes a 27" x 16" precision...
    RTTGI
    CAD $1,154.00
    Add to Cart
  • SAW STOP 4 PC PHENOLIC INSERT RING SET

    SAWSTOP

    SAW STOP 4 PC PHENOLIC INSERT RING SET

    CAD $125.00
    4 pc Phenolic Insert Ring Set for Router Plates. These phenolic inserts are graduated in size for quick-change versatility. Specifications: Actual dimensions: 3 3/4" w, 3 3/4" d, 1 1/4" hUltra-strong phenolic core material to reduce tear-out and chip...
    RTPIR
    CAD $125.00
    Add to Cart
  • SAW STOP FLIP STOP FOR ROUTER FENCE

    SAWSTOP

    SAW STOP FLIP STOP FOR ROUTER FENCE

    CAD $45.00
    Designed to fit SawStop RT Fence Assemblies, this flip stop is built to facilitate repeated cuts with precision. Features: Designed to quickly give you accurate, repeatable measurementsCompatible with all SawStop Router FencesTop-mounted dovetail track...
    RTFLS
    CAD $45.00
    Add to Cart
  • SAW STOP 27IN. X 16IN. CAST IRON TABLE FOR

    SAWSTOP

    SAW STOP 27IN. X 16IN. CAST IRON TABLE FOR

    CAD $474.00
    This 27" cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Features: Actual dimensions: 27" w, 16" d, 1 1/2" hMaximize your shop space with the in-line...
    RTC27
    CAD $474.00
    Pre-Order Now
  • ROUTER BIT STORAGE TRAY

    ROUTER BIT STORAGE TRAY

    Now: CAD $17.99
    Was: $19.99
    1-1/2 Inch High-Density Foam Router Bit Storage Tray Router Bit Tray stores and organizes up to 100 bits, with 50 holes each for 1/2" & 1/4" shanks. (1/4" holes accept 8mm shanks as well.) Stiff foam slab is 12-1/4" square x 1-1/2" thick. Holes are...
    B4161
    Now: CAD $17.99
    Was: $19.99
    Add to Cart
  • UNIVERSAL CIRCLE CUTTING ROUTER JIG

    UNIVERSAL CIRCLE CUTTING ROUTER JIG

    Now: CAD $76.99
    Was: $79.99
    Cut perfect circles, arcs, and radius corners for tabletops, lazy Susan’s and wheels. Features: Cut 8" to 48" in diameter circles. Specifications: Material: PC
    B4154
    Now: CAD $76.99
    Was: $79.99
    Add to Cart
  • 3/8IN. FENCE FLIP STOP

    3/8IN. FENCE FLIP STOP

    Now: CAD $24.99
    Was: $26.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4152
    Now: CAD $24.99
    Was: $26.99
    Add to Cart
  • 1/4IN. FENCE FLIP STOP

    1/4IN. FENCE FLIP STOP

    Now: CAD $22.99
    Was: $24.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4151
    Now: CAD $22.99
    Was: $24.99
    Add to Cart
  • GAUGE 2 IN 1 ROUTER / TABLE SAW

    GAUGE 2 IN 1 ROUTER / TABLE SAW

    Now: CAD $10.99
    Was: $13.99
    2 in 1 Router Depth & Saw Gauge This 2 in 1 gauge is really an all in one gauge as it can be used to set up table saws, band saws and routers in a quick and efficient manner. Step gauge from 1/8" to 2" Router depth gauge from 1/8" to 1"
    B2386
    Now: CAD $10.99
    Was: $13.99
    Add to Cart
  • R/BIT DADO SET 6PCS 1/4IN. SHANK

    6PC DADO BIT SET 1/4IN. SHANK

    CAD $49.99
    This set of six straight bits is ideal for cutting dadoes, rabbets and other general cutting needs. The set includes regular and undersized bits making it handy for working with commercial plywood. The set includes the following widths: 15/64", 1/4",...
    R942
    CAD $49.99
    Add to Cart
  • 6PC DADO BIT SET 1/2IN. SHANK

    Craftex Blue Tornado

    6PC DADO BIT SET 1/2IN. SHANK

    CAD $49.99
    This set of six straight bits is ideal for cutting dadoes, rabbets and other general cutting needs. The set includes regular and undersized bits making it handy for working with commercial plywood. The set includes the following widths: 15/64", 1/4",...
    R941
    CAD $49.99
    Pre-Order Now
  • 1/4IN. SOLID CARBIDE SPIRAL UP CUT BIT 1/4

    Craftex Blue Tornado

    1/4IN. SOLID CARBIDE SPIRAL UP CUT BIT 1/4

    Now: CAD $19.99
    Was: $27.99
    These bits are excellent at removing material quickly and efficiently, leaving behind a smooth and clean surface. Made from solid carbide, these bits are great for cutting mortises, grooves, dadoes and routing deep blind holes in all composition...
    065063R1
    Now: CAD $19.99
    Was: $27.99
    Add to Cart
  • 1/8IN. SOLID CARBIDE SPIRAL UP CUT BIT 1/2

    Craftex Blue Tornado

    1/8IN. SOLID CARBIDE SPIRAL UP CUT BIT 1/2

    Now: CAD $18.99
    Was: $22.99
    These bits are excellent at removing material quickly and efficiently, leaving behind a smooth and clean surface. Made from solid carbide, these bits are great for cutting mortises, grooves, dadoes and routing deep blind holes in all composition...
    065032R
    Now: CAD $18.99
    Was: $22.99
    Add to Cart
  • PRECISION ALUMINUM ROUTER TABLE INSERT 9

    Craftex CX Series

    PRECISION ALUMINUM ROUTER TABLE INSERT 9

    Now: CAD $129.00
    Was: $149.00
    The CXRINSERT Aluminum Precision Router Insert plate is designed for use with the CXR1000 Precision Router Lift. Equipped with etched white scales in both imperial and metric. A thick aluminum router table insert will support the heaviest of routers,...
    CXRINSERT
    Now: CAD $129.00
    Was: $149.00
    Add to Cart
  • 7PC SLOT CUTTER BIT SET 1/2IN. SHANK

    Craftex Blue Tornado

    7PC SLOT CUTTER BIT SET 1/2IN. SHANK

    CAD $89.99
    This set has six different slot cutters ranging from 1/16" to 1/4". Simply fit the desired slot cutter onto the arbor provided and cut your groove. The cutter sizes included are: 1/16", 3/32", 1/8", 5/32", 3/16", and 1/4". The bits come housed in a...
    R932
    CAD $89.99
    Add to Cart
  • UNIVERSAL FENCE CLAMP 3IN. TO 4.5IN. 2PC

    UNIVERSAL FENCE CLAMP 3IN. TO 4.5IN. 2PC

    Now: CAD $12.99
    Was: $14.99
    B3059 2-pc Universal Fence Clamps Shop made auxiliary fences have never been so easy to hold. These 2-pc Universal Fence Clamps allow holding 3" to 4-1/2" thick shop made auxiliary fence to your existing fence without the clamp interfering with your...
    B3059
    Now: CAD $12.99
    Was: $14.99
    Add to Cart
  • SHAKER RAIL AND STILE BIT SET 1/2IN. SHANK

    Craftex Blue Tornado

    SHAKER RAIL AND STILE BIT SET 1/2IN. SHANK

    Now: CAD $73.99
    Was: $92.99
    This set of two bits allows you to quickly and easily create the joinery required for rail and stile doors. The included bearings allow you to work on both straight and curved work. These bits paired with one of our raised panel bits will make elegant...
    R947
    Now: CAD $73.99
    Was: $92.99
  • ROUTER FIXED BASE 2 1/4HP DEWALT

    ROUTER FIXED BASE 2 1/4HP DEWALT

    CAD $259.00
    2-1/4 HP (maximum motor HP), 12.0 amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoods. Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm and soft...
    DW618
    CAD $259.00
    Pre-Order Now
  • 5/16IN. X 2IN. STRAIGHT ROUTER BIT 1/4IN. SHAN

    Craftex Blue Tornado

    5/16IN. X 2IN. STRAIGHT ROUTER BIT 1/4IN. SHAN

    CAD $16.50
    Straight cutting router bits are just what you need for cutting joinery like mortises, rabbets, dados, grooves. These are truly a multi-purpose bit. SPECIFIACTIONS Diameter: 5/16" Cutting Length: 2" Shank Diameter: 1/4" Total Length: 3 3/4" Craftex...
    025079B3
    CAD $16.50
    Add to Cart
  • FINGER JOINT ROUTER BIT 1/2IN. SHANK

    Craftex Blue Tornado

    FINGER JOINT ROUTER BIT 1/2IN. SHANK

    CAD $105.00
    Until someone invents the board stretcher, this is an efficient way to joint multiple smaller pieces to increase overall length. This is the most common router bit used for this purpose and provides an extremely strong joint. It provides a solid gluing...
    237420A
    CAD $105.00
    Add to Cart
  • 3/8IN. X 1/2IN. FLUSHTRIM BIT 1/4IN. SHANK

    Craftex Blue Tornado

    3/8IN. X 1/2IN. FLUSHTRIM BIT 1/4IN. SHANK

    CAD $13.99
    Flush trim bits are designed for accurate trimming and template work on solid wood or laminates. The use of two flutes makes for accurate and fast cutting. SPECIFICATIONS Diameter: 3/8" Cutting Length: 1/2" Shank Diameter: 1/4" Total Length: 2-1/4"...
    305095
    CAD $13.99
    Add to Cart
  • 1/2IN. X 1/2IN. FLUSHTRIM BIT 1/4IN. SHANK

    Craftex Blue Tornado

    1/2IN. X 1/2IN. FLUSHTRIM BIT 1/4IN. SHANK

    CAD $14.99
    Flush trim bits are designed for accurate trimming and template work on solid wood or laminates. The use of two flutes makes for accurate and fast cutting. SPECIFICATIONS Diameter: 1/2" Cutting Length: 1/2" Shank Diameter: 1/4" Total Length: 2-1/4"...
    305127
    CAD $14.99
    Add to Cart
  • 5/8IN. CORE BOX BIT 1/4IN. SHANK

    Craftex Blue Tornado

    5/8IN. CORE BOX BIT 1/4IN. SHANK

    CAD $16.99
    This bit allows you to create decorative elements on panels or to create signs. Ideal for use in any type of wood or composite. SPECIFICATIONS Diameter: 5/8" Cutting Length: 1/2" Radius: 5/16" Shank Diameter: 1/4" Total Length: 1-7/8" Craftex Blue...
    405159
    CAD $16.99
    Add to Cart
  • STRAIGHT RAISED PANEL BIT 1/2IN. SHANK

    Craftex Blue Tornado

    STRAIGHT RAISED PANEL BIT 1/2IN. SHANK

    CAD $74.99
    Panel raising bits are used to create a raised field commonly seen on cabinet doors, but they can also be used for decorative edge work. Designed for use with 3/4" stock, this cutter can also be used to make plaques, moldings, or even decorative tops. ...
    837889B
    CAD $74.99
    Add to Cart
  • 7/16IN. STRAIGHT ROUTER BIT 1/2IN. SHANK

    Craftex Blue Tornado

    7/16IN. STRAIGHT ROUTER BIT 1/2IN. SHANK

    CAD $16.50
    Straight cutting router bits are just what you need for cutting joinery like mortises, rabbets, dados, grooves. These are truly a multi-purpose bit. SPECIFICATIONS Diameter: 7/16" Cutting Length: 2" Shank Diameter: 1/2" Total Length: 3 3/4" Craftex...
    027111B3
    CAD $16.50
    Add to Cart
  • ROUTER BIT CATALOGUE

    ROUTER BIT CATALOGUE

    CAD $0.50
    Craftex Blue Tornado Router Bit Catalogue This flyer is free, add to cart to remove cost. Shop a wide selection of high-quality router bits through our Router Bit Catalogue. Add one to your cart and get a free copy with your order or pick one up in...
    FLYERRB
    CAD $0.50
    Add to Cart
  • FREUD 5.4ø X 1/16IN. TAPERED BALLÿTIP

    Freud

    FREUD 5.4ø X 1/16IN. TAPERED BALLÿTIP

    Now: CAD $53.99
    Was: $62.99
    5.4° x 1/16" Tapered Ball Tip Solid Carbide Bit. Includes 4 flutes and 1/16" diameter. 1/4" Shank. A great choice for 2D or 3D carving work in plastics or wood. Three-flute design lets you make fast cuts with very efficient chip and dust evacuation...
    72400
    Now: CAD $53.99
    Was: $62.99
    Add to Cart
  • FREUD 6.2° X 1/32IN. TAPERED BALL TIP

    Freud

    FREUD 6.2° X 1/32IN. TAPERED BALL TIP

    Now: CAD $52.99
    Was: $62.99
    6.2° x 1/32" Tapered Ball Tip Solid Carbide Bit. Includes 3 flutes and 1/32" diameter. 1/4" Shank. This solid carbide carving bit features an extremely fine 1/32" diameter tip for ultra-detailed cuts. The 3 flute design provides fast chip clearance...
    72300
    Now: CAD $52.99
    Was: $62.99
    Pre-Order Now
  • FREUD 1/4IN. UP CUT SPIRAL BALL NOSE 1 1/8

    Freud

    FREUD 1/4IN. UP CUT SPIRAL BALL NOSE 1 1/8

    Now: CAD $41.99
    Was: $50.99
    1-1/8" Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4" diameter. 1/4" Shank. Freud Ball Nose Bits are ideal for routing plastics, composites, wood or solid surface materials. Use for grooving or edge work. With an extra-long cutting...
    72202
    Now: CAD $41.99
    Was: $50.99
    Add to Cart
  • FREUD 1/4IN. UP CUT SPIRAL BALL NOSE 1/2IN.

    Freud

    FREUD 1/4IN. UP CUT SPIRAL BALL NOSE 1/2IN.

    Now: CAD $39.99
    Was: $46.99
    1/2" Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4" diameter. 1/4" Shank. Freud Solid Carbide Ball Nose Bits are ideal for routing plastics, composites, wood or solid surface materials. Use for grooving or edge work. Ideal for...
    72101
    Now: CAD $39.99
    Was: $46.99
    Add to Cart
  • FREUD 1/8IN. O FLUTE STRAIGHT BIT

    Freud

    FREUD 1/8IN. O FLUTE STRAIGHT BIT

    Now: CAD $35.99
    Was: $41.99
    Freud O-Flute Straight bits are perfect for graphics, sign making, intricate detail work, or almost any cut-out job where a smooth finish is required on the cut edge. These bits are ideal for large and small CNC machines, but they also can be used on...
    71040
    Now: CAD $35.99
    Was: $41.99
    Add to Cart
  • FREUD 7.5 DEG X 3/16IN. ENGRAVING V GROOVE

    Freud

    FREUD 7.5 DEG X 3/16IN. ENGRAVING V GROOVE

    Now: CAD $28.99
    Was: $33.99
    7.5° x 3/16" Engraving V-Groove Solid Carbide Bit. 1/2" Cutting Length. 1/4" Shank. Perfect for engraving and lettering applications in hard or soft wood, or composite materials. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and...
    70103
    Now: CAD $28.99
    Was: $33.99
    Add to Cart
  • FREUD 1/2IN. V GROOVING BIT 60 DEG

    Freud

    FREUD 1/2IN. V GROOVING BIT 60 DEG

    Now: CAD $34.99
    Was: $39.99
    "V" Grooving bits are the perfect choice for making signs, engraving wood plaques, adding decorative accents to furniture or adding visual interest to millwork. Use these versatile bits in hand-held, table-mounted or CNC routers to rout hardwood,...
    20152
    Now: CAD $34.99
    Was: $39.99
    Pre-Order Now
  • FREUD 3/4IN. V GROOVING BIT 90 DEG

    Freud

    FREUD 3/4IN. V GROOVING BIT 90 DEG

    Now: CAD $29.99
    Was: $35.50
    "V" Grooving bits are the perfect choice for making signs, engraving wood plaques, adding decorative accents to furniture or adding visual interest to millwork. Use these versatile bits in hand-held, table-mounted or CNC routers to rout hardwood,...
    20108
    Now: CAD $29.99
    Was: $35.50
    Add to Cart
  • FREUD 1/2IN. V GROOVING BIT 90 DEG

    Freud

    FREUD 1/2IN. V GROOVING BIT 90 DEG

    Now: CAD $19.99
    Was: $24.99
    "V" Grooving bits are the perfect choice for making signs, engraving wood plaques, adding decorative accents to furniture or adding visual interest to millwork. Use these versatile bits in hand-held, table-mounted or CNC routers to rout hardwood,...
    20104
    Now: CAD $19.99
    Was: $24.99
    Add to Cart
  • 2IN. SPOILBOARD SURFACING ROUTER BIT

    Craftex Blue Tornado

    2IN. SPOILBOARD SURFACING ROUTER BIT

    Now: CAD $63.99
    Was: $67.99
    1/2 Inch Shank CNC Spoil board Surfacing Route Bit. This Carbide Slab Flattening Router Bit has 2 inch Cutting Diameter. Can be used to resurface your CNC routers spoil board or used in wood milling applications as well as on planer sleds to flatten...
    247508
    Now: CAD $63.99
    Was: $67.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley