R/BIT DRAWER LOCK 1 1/4IN. X1/2IN. X1/4IN. SHANK

(No reviews yet) Write a Review
Now: $23.75
Was: $29.69
You save $5.94
Model:
805318C
Brand:
Weight:
0.10 KGS
Shipping:
Calculated at Checkout
Online Status:
IN STOCK ONLINE
On Sale
Check Stock at your local store
In Stock
(Stock availability may not 100% accurate )

Description


Drawer Lock Bit

Gives very strong joint between drawer side and drawer front.
Increased glue area improves holding power.

Use only with Router Table.

Dia: 1 1/4"
Cutting Length: 1/2"
Angle: 15 degree
Shank Dia: 1/4"
Total Length: 1 27/32"

Blue Tornado bits are CNC machined to give a perfect balance and complete
smooth finish. All bits are manufactured from 4140 & 5140 steel and are put
through a special heat treatment to ensure proper hardness and tensile strength
to prevent bending or breaking. A Tungsten micro grain C3 carbide gives the
cutter a longer lasting strength that can be sharpened many times over.
Craftex Blue Tornado bits also have an anti-kickback design along with an
anti-stick coating to decrease friction. Lastly, an automotive semi-transparent
finish is added to the bit to give a longer lasting shine.

All Craftex Blue Tornado Router Bits and Shaper Cutters are backed by a
Limited Life-Time Warranty.

View AllClose

Previously Viewed

R/BIT DRAWER LOCK 2IN. X1/2IN. X1/2IN. SHANK

Craftex Blue Tornado

R/BIT DRAWER LOCK 2IN. X1/2IN. X1/2IN. SHANK

Now: $36.23
Was: $45.29
Drawer Lock Bit Very strong joint between drawer side and drawer front. Increased glue area improves holding power. Use only with Router Table. Dia: 2" Cutting Length: 1/2" Angle: 15 degree Shank...
807508C
Now: $36.23
Was: $45.29
R/BIT GLUE JOINT 1 1/2IN. X1 1/4IN. X1/2IN. SHANK

Craftex Blue Tornado

R/BIT GLUE JOINT 1 1/2IN. X1 1/4IN. X1/2IN. SHANK

Now: $35.99
Was: $47.99
Reversible Glue Joint Bit This bit is used to join stock to make wide panels. Align the bit to center and reverse each board for the perfect glue joint. For use with router table. Dia: 1 1/2"...
797381C
Now: $35.99
Was: $47.99
ROUTER BIT MASTER SET 66PC 1/2IN. SHANK

ROUTER BIT MASTER SET 66PC 1/2IN. SHANK

Now: $375.20
Was: $469.00
R966 66-pcs 1/2" Shank Router Bit Master Set - CRAFTEX BLUE TORNADO This set contains 66 pieces of the most popular Craftex Blue Tornado profiles. Blue Tornado bits are CNC machined to give a...
R966
Now: $375.20
Was: $469.00
R/BIT VTCL R.PANEL 1 1/8IN. X1 5/8IN. X1/2IN.

R/BIT VTCL R.PANEL 1 1/8IN. X1 5/8IN. X1/2IN.

Now: $23.99
Was: $29.99
Vertical Raised Panel Bit Vertical raised panel bits allow you to make a full size raised panel using 3/4" stock vertically. The smaller diameter is great for use with single speed routers and lower...
817286
Now: $23.99
Was: $29.99
R/BIT TONGUE AND GROOVE SET 1 3/4IN. X 1/2IN. S

R/BIT TONGUE AND GROOVE SET 1 3/4IN. X 1/2IN. S

Now: $31.19
Was: $38.99
Tongue and Groove Set Use on edge to edge stock or edge to end 3/4" stock. For use on router table. Dia: 1 3/4" Cutting Length: 7/32"~ 3/8" Cutting Depth: 0.442" Shank Dia: 1/2" Total Length: 3"...
797476B2
Now: $31.19
Was: $38.99
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley