Hand Tools

410 Sand Master - ROBERT SORBY To put a fine finish on turning work and eliminate sanding lines. Velcro 2" sponge pad mounted on phosphor bronze bearing gives excellent service. Total Length: 11-1/2" Handle: 8-1/2"

High Speed Steel 3 pc Pen Turning Set Set Contains: -5 /16" roughing gouge, (model # 866H) -1/16" parting tool, (model # 865H) -1 /2" spindle master, (model # 879H) (All chisels are 10" long)

2985 Talon Chuck - Oneway  The Talon chuck is designed for wood lathes with a swing of 16" or less. The chuck body is 3-1/2" and is operated with the use of a key. This will give the operator solid holding power and one-handed operation...

Cabinet Scrapers - "Robert Sorby" Rect. 6" x 3" Made of the finest steel. Cabinet scrapers, when properly sharpened and burnished produce a finish not available with either a plane or sandpaper. Invaluable to the cabinetmaker.

Hinge Mortise Kit - MilesCraft This kit allows you to cut accurate door and jamb hinge mortises without any tear or a hole on the wall. The centered tape measures tabs for accurate placement on the door and jamb and the door thickness selector is easily...

Slotted Abrasive Kit for WS3000, work Sharp For use with Edge Vision Slotted Wheel (Model # WS30004) only 1 piece P80 PSA (Pressure Sensitive Adhesive) Abrasive; 150mm diameter, slotted 2 pieces P400 PSA Abrasive; 150mm diameter, slotted 2 pieces P1200...

Honing Abrasive Kit for WS3000, Work Sharp For use with Tempered Glass Wheel (Model # WS30003) 1 piece 3600 Micro-Mesh PSA Abrasive (equivalent to 6 æ micron); 150mm diameter 1 piece 6000 Micro-Mesh PSA Abrasive (equivalent to 2æ micron);...

Fine Abrasive Kit for WS3000 & WS2000, Work Sharp 4 pieces P400 PSA (Pressure Sensitive Adhesive) Aluminum Oxide Abrasive; 150mm diameter 6 pieces P1000 PSA Aluminum Oxide Abrasive; 150mm diameter 2 pieces P400 PSA Ceramic Oxide Abrasive; 2 in...

Coarse Abrasive Kit for WS3000 & WS2000, Work Sharp 2 pieces P80 PSA (Pressure Sensitive Adhesive) Ceramic Oxide Abrasive; 150mm 2 pieces P120 PSA Ceramic Oxide Abrasive; 150mm diameter 3 pieces P220 PSA Aluminum Oxide Abrasive; 150mm diameter 2...

150mm Tempered Glass Wheel for WS3000, Work Sharp It replaces the tempered glass wheel with maximum operating speed of 650 RPM that comes with WS3000 or you can apply different grits of PSA abrasives on it to expand the capacity of your sharpening...

Leather Hone Kit for WS3000, Work Sharp For use with WS3000 and allows you to hone for a superior mirror finish. The kit includes: 150 mm tempered glass wheel Adhesive Backed Leather Strop Disk Chromium Oxide Honing Compound Leather Conditioner (white...

2" Velcro Sanding Pad By Robert Sorby May be used with the "Sand Master" or separately Available - 2" Velcro Sponge Discs - 10 Per Pack Model Grit RS412A60 60 RS412A120 120 RS412A180 180 RS412A240 240

KREG Feather Board Twin Pack The True-FLEXO Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in...

INCRA MITER GAUGE V27 The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter...

MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...

MITEREXPRESS INCRA MITER GAUGE EXPRESS The NEW Incra Miter Express Makes Safe and Easy Mitered Cuts Incra's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Turn any miter...

KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw...

KMS7724 1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing,...

KMS7723 1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing,...

2 1/2" Long Center Punch for Hinge 3/8" Diameter This 2 1/2" long center punch provides you accurate marks and prevents the drill bits from traveling and drilling wrong hole.

INCRA MITER SLIDER 24" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...

INCRA MITER SLIDER 18" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...

INCRA Gauge Works as a precision marking gauge, a freestanding depth-of-cut gauge, a fence alignment gauge and a center finder. This easy to use gauge will offer dozens of uses in your projects and become an indispensable layout tool for your workshop.

Super Tenon Jig All cast iron to fit any 3/4" table slot with adjusters for fit Screw clamping to 5" clamping plate with adjustment to 20 degree from vertical 45 degree fence to allow compound angles Micro adjustment Two handles for control Designed to...

Saw Step Gauge Heavy Gauge Aluminum Our step gauge gives you an exact setting, the first time, regardless of width or set of the blade. More accurate than any ruler. It will set your rip fence, your radial or table saw depth of cut and measure groove...

Honing Guide This easy to use tool enables even an amateur to achieve a perfect edge when resharpening both wood chisels and plane irons Capacity: 1/8" to 2 5/8"

B761 Hex Key Wrench Sets Excellent Quality Made of specially selected steels of either chrome vanadium steel or carbon steel Manufactured to precise standards Heat treated Assures maximum resistance to torque stresses All these keys meet the American...

American Pattern File Type: 8" Mill Bastard This file is made from the finest grade steel and is specially finished by a method designed to improve its cutting efficiency and lengthen its effective life. Picture Differs Slightly

American Pattern File Type: 10" Mill Bastard This file is made from the finest grade steel and is specially finished by a method designed to improve its cutting efficiency and lengthen its effective life. Picture Differs Slightly

Automatic Centre Punch Pressure can be varied from 5lbs. to 30lbs.approximately simply by rotating knurled head. Used for light to heavy marking. Speeds up layout. Overall length 5”.

Screw Pitch Gauges Features Made of tempered steel and are precision ground T.P.I. stamped on each blade All blades can be locked to any desired position Number of blades: 30 TPI: 4-42

Mini Magnetic Base - 5" This model comes with a fine adjustment. Included is a disc on bottom for neutralizing magnet. Powerful magnets are 1 1/8" in dia. and 1 1/8" high.

5 PC. Punch Set Black nitrate finish. Chrome alloy steel. Knurled grip. Hardened on Both ends. Ideal for layout. Includes plastic pouch.

Complete Letter/Number Set – 3/16" Hardened and heat treated, these steel stamps are excellent for marking all metal objects except hardened steel or cast iron.

Mortising Chisel for Mortising Attachment. Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 5 / 8" Collar Diameter: 3 / 4"

Mortising Chisel for Mortising Attachment Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 3 / 8" Collar Diameter: 3 / 4"

Mortising Chisel for Mortising Attachment Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 1 / 4" Collar Diameter: 3 / 4"

Mortising Chisel for Mortising Attachment.Each chisel is complete with a drill bit. Save time and cost by mortising. Size: 1 / 2" Collar Diameter: 3 / 4"

Mortising Chisel 5pc Set Set Includes: 1/4",5/16",3/8" 1/2" & 5/8"

Magnetic Holder With Fine Adjustment Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|

Digital Indicator This digital indicator replaces the "dial indicator" with advanced and more accurate readings. This unit features 3 way readings in inch, metric and fraction. Other unique features include ABS, HOLD function and Data Output to PC...

Digital Height Gauge This large LCD display Stainless Steel Digital Height gauge has many features not found on other height gauges. First the strong magnets on the base allow for easy setting on steel table tops and fence sides. The unit allows for 2D...

8" Wing Compass - Groz This rugged industrial grade compass is manufactured from heavy gauge steel with an attractive black powder coated finish. The tip is accurately ground. Heavy Duty hinge and knurled locking nut help in convenient movement. Used...

17 pc File & Rasp Set with Canvas Carrying Pouch These selected Files feature an ergonomic rubberized soft grip handle, specially selected heat treat alloy steel construction and overall high quality for demanding applications. Contains 10" Mill...

B2642 Round File, 10" These selected Files feature an ergonomic rubberized soft grip handle, specially selected heat treat alloy steel construction and overall high quality for demanding applications.

B2640 Flat File 10" These selected Files feature an ergonomic rubberized soft grip handle, specially selected heat treat alloy steel construction and overall high quality for demanding applications.

1 1/8” Knob Wing (Male) Size: 5/16” x 18 TPI

1 1/8” Knob Wing (Male) Size: 1/4” x 20 TPI

1 1/8” Knob Wing (Female) Size: 5/16” x 18 TPI

B2638 Half Round Rasp, 10" These selected rasps feature an ergonomic rubberized soft grip handle, specially selected heat treat alloy steel construction and overall high quality for demanding applications.

B2637 Half Round Rasp, 8" These selected rasps feature an ergonomic rubberized soft grip handle, specially selected heat treat alloy steel construction and overall high quality for demanding applications.

1 1/4” Knob Size: 5/16” x 18 TPI

Dovetail Jaws 4" Wood turners can always use dovetail jaws. These jaws are designed for mounting bowls in to recess or a spigot. The dovetail jaws can be used to hold the work piece by either compressing or expanding.

Pin Jaws 1" Pin jaws are great for expansion in to small recesses and for firm holding of fine spindle work. They are ideal for turning items such as salt and pepper shakers, chess pieces and fine spindle work.

Sleeve Model # B261818 Optional sleeve for the B2618 - 4 Jaw Wood Chuck 1" x 8" TPI

Sleeve Optional sleeve for the B2618 - 4 Jaw Wood Chuck 7/8" x 14 TPI

Sleeve Optional sleeve for the B2618 - 4 Jaw Wood Chuck 3/4" x16 TPI

4" Wood Chuck "O Type" Spindle size: 1" - 8 TPI Internal chucking: 2" - 3" External chucking: 1 1/2" - 2" Included 4 extra jaws giving internal chucking to 3/4", 1 1/4" and 1 3/4" Also includes wood screw

Hold Down T-Track Solid aluminum with large T-Knob fits any slot which holds the head of 1/4" - 20 bolt. Hold stock upto 2" thick.

4" Digital Caliper Range 0-4"/0-90mm Resolution: .0005"/.01mm Stainless steel with hardened jaws Inside, outside and depth

Industrial Casters, 5" Real heavy weights for the most demanding applications. Capacity: 100kg. Tire: Rubber Type: Swivel & Brake

36" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...

24" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...

Aluminum T-Track Hold Down Kit 3/4" x 1/4" aluminum bar 3" wing nut 4" 1/4-20 bolt

28pc Transfer Punch Set Heat-treated Size: 3/ 32" - 1/2" x 1/64" and handy size of 17/32" 4 7/8" long

Econo Drill Chuck Keyed Chuck Return the accuracy to your Drill Press| Size: 1/2" Taper: JT33

NEW| Knife Set Gauge Universal 1 Pair Set Knives Quick and Accurate Micrometer scales easy to read and lock in place. Each jig has 3 sets of magnet, 2 to secure to cutter head, 1 to hold blade. Accuracy to .001" Up to 26" long Comes in wooden case

Centre Gauge 60° Assure proper set up when threading. Tempered stainless tool steel. Satin chrome finish, no glare. Graduated in 14th and 20th on one side, and 24th and 32nd on the other. Notches have clearance slots. Table for double depth American...

4 Jaw Safety Scroll Chuck - 3/4" x 16 TPI The Perfect Way To Hold Face Plate Work| Precision turned Hardened body and jaws Black oxide finish Complete with Allen wrench and two locking bars External chucking: Round: 1 3/4" - 2 5/8" dia. Internal...

4 Jaw Safety Scroll Chuck - 1" x 8 TPI The Perfect Way To Hold Face Plate Work| Precision turned Hardened body and jaws Black oxide finish Complete with Allen wrench and two locking bars External chucking: Round: 1 3/4" - 2 5/8" dia. Internal chucking:...

Drill Chuck - Keyless For the safety conscious Hardened and toughened jaws Special steel body Size: 5/8" Taper: JT6

Indicator Holder (Universal) Clamping dia.: 1 7/8" Length to indicator: 4 1/2" Mounts directly on machine quill Fits all indicators with 5/32" shank Indicator not included

Gauge Screw Cutting Made from stainless steel in satin chrome finish. Permanently deep etched graduations Accurate tread profiles 47 - 1/2" degree 14 - 1/2 degree 55 degree and BSF, 60 degree

Dial Test Indicator Fully jeweled movement Range: .03" Reading: 0-15-0" Graduation: .0005"

Digital Caliper Range: 0-6"/0-150mm Resolution: .0005"/.01mm Easy conversion from inch to metric and vise versa

Indicator Accessory Kit 22 assorted points that will fit most indicators 4-48 thread Complete with case

Chuck Key - Spring Eject Avoid that possible injury by using this spring loaded safety key for your drill chuck A preferred item for schools where safety is a number one priority Fits chucks between 1/2" to 5/8"

2” Adjustable Handle Size: 5/16” x 18 TPI

2” Adjustable Handle Size: 3/8” x 16 TPI

2” Adjustable Handle Size: 1/4” x 20 TPI

2 ¼” Dia. Star Knob ( 1” stud) Size: 5/16” x 18 TPI

2 ¼” Dia. Star Knob ( 1” stud) Size: 3/8” x 16 TPI

2 ¼” Dia. Star Knob ( through hole) Size: 5/16” x 18 TPI

2 ¼” Dia. Star Knob ( through hole) Size: 3/8” x 16 TPI

2 ¼” Dia. Star Knob ( through hole) Size: 1/4” x 20 TPI

2 ½” T-Knob Size: 5/16” x 18 TPI

3” Post Handle Size: 3/8” x 16 TPI.

Brass Sliding Caliper Solid brass 4«" long Dovetail slide calibrated 0-4" and 0-100mm Perfect pocket measuring tool in presentation case

Sharpening Guide 2 in 1 Easy to use on both the grinder and the hone Sharpen hand chisel and plane blades on this guide Scale on guide gives accurate 30 degree setting, guide takes up to 2 5/8" wide blades

Optional sleeve For B1812 "One Way" Chuck 1 1/4" x 8 TPI Made in Canada

Optional sleeve For B1812 "One Way" Chuck 1" x 8 TPI Made in Canada

Jaw For Model B1821 "One Way" 4 Jaw Safety Scroll Chuck #3 Holding Dimensions: External chucking Minimum: 3 1/8" Maximum: 4 1/2" Optional Holding Dimensions: Internal chucking Minimum: 3 3/4" Maximum: 5 1/4" Made in Canada

Jumbo Jaws For Model B1821 "One Way" 4 Jaw Safety Scroll Chuck Holding Dimensions: External chucking Minimum: 2 3/4" Maximum: 11" Optional Holding Dimensions: Internal chucking Minimum: 4 3/4" Maximum: 12" Made in Canada

"One Way" 4 Jaw Safety Scroll Chuck Made in Canada Basic Chuck is complete with #2 jaws, wood screws and wrench Weight: 2 kg Extra Jaws Model Holding Dimensions Minimum Maximum # 1 Jaws B1821J1 (optional) #2 Jaw B1821J2 (Standard) # 3...

Jointer Knives Honing Tool for H.S.S Knives This simple hone tool lets you hone your jointer knives without having to remove them from the machine. Dip the hones in oil and make light, even strokes against the cutter head for perfect edges. The body...

8" Lazy Susan 5/16" Thick Size: 4" Load Capacity: 100kg

Combination Mallet Chrome plated steel tubular handle with rubber grip Head with plastic and rubber tips

American Pattern File Type: 8" Handy File This file is made from the finest grade steel and is specially finished by a method designed to improve its cutting efficiency and lengthen its effective life. Picture Differs Slightly

6" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...

Needle File Set - 5pc. 5 1/2" Long Various Shapes Easy Cutting