null

Woodworking

Woodworking

  • 1/4IN. COLLET
    Add to Cart

    Shaper Origin

    1/4IN. COLLET

    CAD $70.00
    Use this as a replacement collet for the 1/4" collet that ships with your Origin, or keep it on hand to make bit changes faster and more efficient when going back and forth between bits without needing to chuck and unchuck each time. This resilient,...
    SC12500
    CAD $70.00
    Add to Cart
  • 1/8 INCH COLLET WITH NUT
    Add to Cart

    Shaper Origin

    1/8 INCH COLLET WITH NUT

    CAD $70.00
    This Origin-ready â…›-inch collet greatly increases the variety and intricacy of projects you can tackle with Origin, including inlays, fretwork, and engraving. Additionally, this collet will give you access to a range of specialty bits with 1/8”...
    SC11250
    CAD $70.00
    Add to Cart
  • AUTOPASS
    Pre-Order Now

    Shaper Origin

    AUTOPASS

    CAD $275.00
    AutoPass can automatically configure your cut depth and automatically ramp into each pass, saving you time and preventing mistakes along the way. Before CuttingAutoPass automatically calculates your pass depths based on the bit diameter installed. You...
    SA2APPN
    CAD $275.00
    Pre-Order Now
  • MAKITA GUIDE RAIL 1000MM
    Add to Cart

    Makita

    MAKITA GUIDE RAIL 1000MM

    CAD $84.99
    The Makita 39" Plunge Saw Guide Rail, when used with a Makita Plunge Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts...
    1991400
    CAD $84.99
    Add to Cart
  • STANLEY FATMAX LEVEL 24IN.
    Add to Cart

    Stanley

    STANLEY FATMAX LEVEL 24IN.

    Now: CAD $29.99
    Was: $34.97
    24 in. FATMAX® non-magnetic level Features Block vials provide maximum accuracy of 0.0005 in./in. (0.5mm/m)MaxEdge™ bridged center vial for continuous marking surface and durabilitySingle-piece, aluminum box-beam structure for durability and...
    43524
    Now: CAD $29.99
    Was: $34.97
    Add to Cart
  • ZEROPLAY MITER BAR 2 PACK MICROJIG
    Add to Cart

    Microjig

    ZEROPLAY MITER BAR 2 PACK MICROJIG

    CAD $55.99
    Calibrate your miter bar quickly and accurately from above the sled. ZeroPlay Miter Bars are adjusted to fit the miter slot while it is attached to your sled, allowing you to get the best fit possible. Just set, test, and adjust if needed, then begin...
    ZP750B2S2
    CAD $55.99
    Add to Cart
  • VISE ADAPTOR FOR CX614 CT019N DRILL PRES
    Add to Cart

    VISE ADAPTOR FOR CX614 CT019N DRILL PRES

    CAD $59.99
    This Vice Adaptor allows you to convert your cross-sliding vise into a vise table. Precision-engineered to effortlessly replace the table on CX614 and CT019N drill presses. Simply just slide the table out of its clamping bracket and slide the adapter in...
    B4188
    CAD $59.99
    Add to Cart
  • CENTER FINDER MILESCRAFT

    Milescraft

    CENTER FINDER MILESCRAFT

    Now: CAD $6.99
    Was: $8.99
    Quickly and accurately mark centerlines on boards up to 2-1/2” thick. Center Finder straddles your board to mark a perfectly centered line along the face or edge of the boards. Insert the pencil into the center hole, rotate the tool so the...
    8408
    Now: CAD $6.99
    Was: $8.99
  • SCRIBETEC MILESCRAFT
    Add to Cart

    Milescraft

    SCRIBETEC MILESCRAFT

    CAD $12.99
    For precise accurate scribing, the handheld ScribeTec is perfect for a multitude of applications including architectural moldings, cabinet trim, countertops, and a variety of other projects. With the ScribeTec you can easily maintain consistent offsets...
    8407
    CAD $12.99
    Add to Cart
  • DRILL BLOCK PLUS MILESCRAFT
    Add to Cart

    Milescraft

    DRILL BLOCK PLUS MILESCRAFT

    CAD $14.99
    Stop drilling crooked holes and start using a DrillBlock+. This lightweight, durable, hand-held drill guide is packed with features that make it simple to put a perfectly straight hole into any shape of stock or type of material. Features: Hardened...
    1335
    CAD $14.99
    Add to Cart
  • SAW STOP ZERO CLEAR INSERT COMPACT TABLE
    Add to Cart

    SAWSTOP

    SAW STOP ZERO CLEAR INSERT COMPACT TABLE

    CAD $34.00
    The Standard table saw insert is specifically engineered for the SawStop 10” Compact Table Saw. This zero-clearance insert is for accurate cuts and reduce tear out. One push lockdown allows for tool-free operation and easy install. Engineered...
    CTSTSI
    CAD $34.00
    Add to Cart
  • MAKITA 40V CIRCULAR SAW XGT W/55IN. RAIL
    Add to Cart

    Makita

    MAKITA 40V CIRCULAR SAW XGT W/55IN. RAIL

    CAD $599.00
    40V MAX XGT Li-Ion BL 6-1/2" Plunge Cut Circular Saw with Brushless Motor & AWS. Equipped with Auto-Start Wireless System (AWS) Technology Features Wireless Dust Collection Technology! Includes 55" Guide Rail. Features: Two-Stage Safety Switch,...
    SP001GZ05
    CAD $599.00
    Add to Cart
  • MAKITA 40V PLUNGE CUT CIRCULAR SAW KIT
    Add to Cart

    Makita

    MAKITA 40V PLUNGE CUT CIRCULAR SAW KIT

    CAD $949.00
    40V MAX XGT Li-Ion (5.0 Ah) BL 6-1/2" Plunge Cut Circular Saw with Brushless Motor & AWS Kit. Equipped with auto-Start Wireless System (AWS) Technology Features Wireless Dust Collection Technology! Features: AWS (Auto-Start Wireless System) uses...
    SP001GT102
    CAD $949.00
    Add to Cart
  • LAGUNA 25IN. PLANER INDUSTRIAL
    Pre-Order Now

    Laguna

    LAGUNA 25IN. PLANER INDUSTRIAL

    CAD $21,099.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MPLAN2515013
    CAD $21,099.00
    Pre-Order Now
  • SAW STOP FOLDING STAND FOR COMPACT TABLE
    Add to Cart

    SAWSTOP

    SAW STOP FOLDING STAND FOR COMPACT TABLE

    CAD $169.00
    Portable stand engineered specifically for SawStop's Compact Table Saw provides a sturdy work surface wherever you need it Features: Wide footing and non-skid rubber feet for stabilityFolds down flat for easy transport and storage. Stowed dimensions: 5...
    CTSFS
    CAD $169.00
    Add to Cart
  • SAW STOP COMPACT TABLE SAW
    Add to Cart

    SAWSTOP

    SAW STOP COMPACT TABLE SAW

    CAD $1,199.00
    The SawStop Compact Table Saw features SawStop's patented safety system with the mobility you need to work from anywhere - at home or on the job site. With a 10" blade and durable construction, you'll have the power and accuracy you need. SawStop's...
    CTS120A60
    CAD $1,199.00
    Add to Cart
  • LAGUNA 3IN. RISER BLOCK FOR REVO1836
    Pre-Order Now

    Laguna

    LAGUNA 3IN. RISER BLOCK FOR REVO1836

    CAD $399.00
    No more hurting your back bending down to reach your lathe’s tool rest. Add one of these convenient riser kits to your 18|36 REVO lathe. It raises the lathe a full 3" for taller wood-turners.  This riser kit can even be used in...
    ALAREVO183
    CAD $399.00
    Pre-Order Now
  • LAGUNA WHEEL SYSTEM FOR REVO 1836
    Pre-Order Now

    Laguna

    LAGUNA WHEEL SYSTEM FOR REVO 1836

    CAD $699.00
    Add a nice wheel system to your REVO 18|36 lathe and turn it into a mobile unit. Now you’ll be able to save some precious shop space by moving your lathe out of the way when not in use. The wheel system is designed for maximum stability by allowing...
    ALAREVO18WS
    CAD $699.00
    Pre-Order Now
  • SAWSTOP BRAKE CARTRIDGE 8IN. DADO BLADES
    Add to Cart

    SAWSTOP

    SAWSTOP BRAKE CARTRIDGE 8IN. DADO BLADES

    CAD $169.00
    Dado brake cartridge stops the spinning blades on contact with skin reducing the chances of a catastrophic injury. Dado cartridges for 8" Dado sets. Features Compatible with all standard 8" dado sets up to 13/16" thickCompatible with all woods and...
    TSDC8R3
    CAD $169.00
    Add to Cart
  • SAW STOP FOUR POST ROUTER LIFT WITH LOCK
    Add to Cart

    SAWSTOP

    SAW STOP FOUR POST ROUTER LIFT WITH LOCK

    CAD $751.00
    Built for heavy-duty precision, the SawStop Router Lift features a chain-synchronized four-post lifting system, positive lock, precision above-table elevation measurement and adjustments, and adaptive collars to fit multiple router sizes. 9.25" x 11.75"...
    RTLFT
    CAD $751.00
    Add to Cart
  • LAGUNA BANDSAW LT20 5HP 220V
    Pre-Order Now

    Laguna

    LAGUNA BANDSAW LT20 5HP 220V

    CAD $9,299.00
    The LT20 has a massive 20-plus inches of resaw, (enough to satisfy any woodworker’s cutting appetite) and cast-iron fly wheels, fence and table. The modern steel frame is manufactured in Italy and assembled with the "Laguna Collection" of features...
    MBAND205200
    CAD $9,299.00
    Pre-Order Now
  • SAW STOP DOWNDRAFT DUST COLLECTION BOX
    Add to Cart

    SAWSTOP

    SAW STOP DOWNDRAFT DUST COLLECTION BOX

    CAD $261.00
    Engineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangeable panels for optimum dust port and Vent placement. Plug the 2...
    RTDCB
    CAD $261.00
    Add to Cart
  • PLANER 13IN. WITH MOBILE STAND DEWALT
    Add to Cart

    DeWalt

    PLANER 13IN. WITH MOBILE STAND DEWALT

    CAD $999.00
    13" Planer Dual Speed with Stand The World's best selling portable planer has all the features and power you could ask for in a portable unit. Made in Taiwan, this is hands down the best portable planer on the market today. Features: Powerful 15MP,...
    DW735S
    CAD $999.00
    Add to Cart
  • MOBILITY CASTER SET FOR 70 3040 RIKON
    Add to Cart

    Rikon

    MOBILITY CASTER SET FOR 70 3040 RIKON

    Now: CAD $266.94
    Was: $374.99
    Rikon Caster Set for 70-3040 Lathe. These 2-1/2" swivel casters include brackets and hardware to install on the 70-3040 lathe legs. Foot activated pedals raise the lathe about an 1" so the lathe can be easily moved when needed.
    70971
    Now: CAD $266.94
    Was: $374.99
    Add to Cart
  • 4 ROLLS 220 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 220 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    Ensure your drum sander continues top-level performance with SuperMax pre-cut abrasive wraps. Sized to fit standard drum sanders from Performax and JET, these tapered abrasive wraps are pre-cut and ready to attach to your sander. Features: High-quality...
    606220
    CAD $57.99
    Add to Cart
  • 4 ROLLS 180 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 180 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    Ensure your drum sander continues top-level performance with SuperMax pre-cut abrasive wraps. Sized to fit standard drum sanders from Performax and JET, these tapered abrasive wraps are pre-cut and ready to attach to your sander. Features: High-quality...
    606180
    CAD $57.99
    Add to Cart
  • 4 ROLLS 150 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 150 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    Ensure your drum sander continues top-level performance with SuperMax pre-cut abrasive wraps. Sized to fit standard drum sanders from Performax and JET, these tapered abrasive wraps are pre-cut and ready to attach to your sander. Features: High-quality...
    606150
    CAD $57.99
    Add to Cart
  • SANDING STRIPS FOR SUPMX71938
    Add to Cart

    Supermax

    SANDING STRIPS FOR SUPMX71938

    CAD $399.00
    Replace the 180 grit flatter strips on your 19-38 combo sander with these flatter strips that are a direct replacement for the 180 grit you started with. There are 12 strips per set. Strips slide easily into the sanding hub. Please remember that you must...
    602180
    CAD $399.00
    Add to Cart
  • LAGUNA JX 6IN. QUADTEC JOINTER
    Pre-Order Now

    Laguna

    LAGUNA JX 6IN. QUADTEC JOINTER

    Now: CAD $2,339.10
    Was: $2,599.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The Laguna JX|6 QuadTec I is loaded with highly desirable features to make jointing safer and more enjoyable. JX|6 QuadTec...
    506601
    Now: CAD $2,339.10
    Was: $2,599.00
    Pre-Order Now
  • SUPERMAX 37 X 2 DOUBLE DRUM WITH CASTERS SUPMX937003
    Pre-Order Now

    Supermax

    SUPERMAX 37 X 2 DOUBLE DRUM WITH CASTERS SUPMX937003

    CAD $5,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Double Drum Sander, 220V, 5HP, 1PH - (includes casters). Sand two grits in a single pass with a 37×2 Double Drum...
    SUPMX937003
    CAD $5,999.00
    Pre-Order Now
  • SUPERMAX SUPERBRUSH 36 X 2 DOUBLE BRUSH
    Pre-Order Now

    Supermax

    SUPERMAX SUPERBRUSH 36 X 2 DOUBLE BRUSH

    CAD $32,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. These easy-to-use machines come with an extremely low learning curve and offer many different features which include: quick...
    SUPMX933672
    CAD $32,999.00
    Pre-Order Now
  • SUPERMAX SUPERBRUSH 24 X 2 DOUBLE BRUS
    Pre-Order Now

    Supermax

    SUPERMAX SUPERBRUSH 24 X 2 DOUBLE BRUS

    CAD $24,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. These easy-to-use machines come with an extremely low learning curve and offer many different features which include: quick...
    SUPMX932672
    CAD $24,999.00
    Pre-Order Now
  • SUPERMAX SUPERBRUSH 36 SANDER
    Pre-Order Now

    Supermax

    SUPERMAX SUPERBRUSH 36 SANDER

    CAD $14,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. SuperMax offers a wide variety of the SuperBrush Sanders to meet the many needs of any woodworking shop. Our goal is to...
    SUPMX91367
    CAD $14,999.00
    Pre-Order Now
  • SUPERMAX 25 X 2 DOUBLE DRUM SANDER
    Pre-Order Now

    Supermax

    SUPERMAX 25 X 2 DOUBLE DRUM SANDER

    Now: CAD $4,769.10
    Was: $5,299.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Double Drum Sander, 220V, 5HP, 1PH - (includes casters). Sand two grits in a single pass with a 37×2 Double Drum...
    SUPMX913002
    Now: CAD $4,769.10
    Was: $5,299.00
    Pre-Order Now
  • SUPERMAX 2 ROLLS 100 GRITS FOR SUPERMAX
    Add to Cart

    Supermax

    SUPERMAX 2 ROLLS 100 GRITS FOR SUPERMAX

    CAD $59.99
    For 37” drum sanders. Each wrap is cut to a taper and length of the drum and is ready to wrap on the drum. Specifications: Type: Aluminum OxideGrit: 100 GritRolls: 2  
    SUPMX607100
    CAD $59.99
    Add to Cart
  • LAGUNA SS14 SPINDLE SANDER
    Pre-Order Now

    Laguna

    LAGUNA SS14 SPINDLE SANDER

    Now: CAD $809.10
    Was: $899.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Laguna’s SS|14 Spindle Sander is a versatile sander that comes standard with a stand, 4 inserts, and 6 spindles,...
    MSANOS14X320
    Now: CAD $809.10
    Was: $899.00
    Pre-Order Now
  • LAGUNA DB126 COMBO DISC SANDER
    Pre-Order Now

    Laguna

    LAGUNA DB126 COMBO DISC SANDER

    Now: CAD $1,169.10
    Was: $1,299.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Laguna’s DB12|6 Sander is a multi-purpose machine that gives you two sanding surfaces. Specifications: Motor: 1.5...
    MSANDB124811
    Now: CAD $1,169.10
    Was: $1,299.00
    Pre-Order Now
  • LAGUNA 5HP PX 20 SHEARTEC PLANER
    Add to Cart

    Laguna

    LAGUNA 5HP PX 20 SHEARTEC PLANER

    Now: CAD $6,569.10
    Was: $7,299.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MPLANPX20130
    Now: CAD $6,569.10
    Was: $7,299.00
    Add to Cart
  • LAGUNA 5HP PX 16 SHEARTEC PLANER
    Add to Cart

    Laguna

    LAGUNA 5HP PX 16 SHEARTEC PLANER

    Now: CAD $5,219.10
    Was: $5,799.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MPLANPX16130
    Now: CAD $5,219.10
    Was: $5,799.00
    Add to Cart
  • LAGUNA REVO 24 X 36 LATHE
    Add to Cart

    Laguna

    LAGUNA REVO 24 X 36 LATHE

    CAD $4,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The first feature that will catch your attention is undoubtedly the ergonomically angled control panel made from anodized...
    MLAREVO24360
    CAD $4,999.00
    Add to Cart
  • LAGUNA REVO 18 X 36 LATHE 110V
    Pre-Order Now

    Laguna

    LAGUNA REVO 18 X 36 LATHE 110V

    CAD $3,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The first feature that will catch your attention is undoubtedly the ergonomically angled control panel made from anodized...
    MLAREVO18361
    CAD $3,999.00
    Pre-Order Now
  • LAGUNA JX 8IN. SHEARTEC JOINTER
    Pre-Order Now

    Laguna

    LAGUNA JX 8IN. SHEARTEC JOINTER

    Now: CAD $3,779.10
    Was: $4,199.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The Laguna JX|8 ShearTec II is loaded with highly desirable features to make jointing safer and more enjoyable. The JX|8 is...
    MJ8X72P0130
    Now: CAD $3,779.10
    Was: $4,199.00
    Pre-Order Now
  • LAGUNA JX 12IN. SHEARTEC JOINTER
    Add to Cart

    Laguna

    LAGUNA JX 12IN. SHEARTEC JOINTER

    Now: CAD $8,369.10
    Was: $9,299.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MJ12X88P0130
    Now: CAD $8,369.10
    Was: $9,299.00
    Add to Cart
  • LAGUNA 18CX 16IN. BANDSAW
    Add to Cart

    Laguna

    LAGUNA 18CX 16IN. BANDSAW

    CAD $5,299.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The 18|CX Bandsaw follows in the traditions of high-performance and reliability to be expected from a Laguna Tools Bandsaw...
    MBAND18CX175
    CAD $5,299.00
    Add to Cart
  • LAGUNA REVO 1524 WHEEL SYSTEM
    Pre-Order Now

    Laguna

    LAGUNA REVO 1524 WHEEL SYSTEM

    CAD $275.00
    ALAREVO1524 Wheel System, Laguna Tools Revo 15|24 Wheel System. Wheel system allows the lathe to be easily moved around the shop. For use with the Laguna 15|24 Lathe.
    ALAREVO1524W
    CAD $275.00
    Pre-Order Now
  • CARTRIDGE BRAKE FOR 10IN. BLADES SAW STOP
    Add to Cart

    SAWSTOP

    CARTRIDGE BRAKE FOR 10IN. BLADES SAW STOP

    CAD $139.00
    SawStop standard 10" brake cartridge TSBC-10R2 for use with SawStop industrial, contractor, and professional table saws (not compatible with older CB model saws).
    TSBC10R3
    CAD $139.00
    Add to Cart
  • SAW STOP 30IN. IN LINE CAST IRON ROUTER
    Add to Cart

    SAWSTOP

    SAW STOP 30IN. IN LINE CAST IRON ROUTER

    CAD $1,211.00
    Optimize your SawStop saw with this In-Line Router Table Assembly. On a Professional Cabinet Saw, replace your extension table with beautiful cast iron. On a Professional or Contractor Saw, install to the left of the saw. Includes a 27" x 16" precision...
    RTTGI
    CAD $1,211.00
    Add to Cart
  • SAW STOP 4 PC PHENOLIC INSERT RING SET
    Add to Cart

    SAWSTOP

    SAW STOP 4 PC PHENOLIC INSERT RING SET

    CAD $131.00
    4 pc Phenolic Insert Ring Set for Router Plates. These phenolic inserts are graduated in size for quick-change versatility. Specifications: Actual dimensions: 3 3/4" w, 3 3/4" d, 1 1/4" hUltra-strong phenolic core material to reduce tear-out and chip...
    RTPIR
    CAD $131.00
    Add to Cart
  • SAW STOP FLIP STOP FOR ROUTER FENCE
    Add to Cart

    SAWSTOP

    SAW STOP FLIP STOP FOR ROUTER FENCE

    CAD $47.00
    Designed to fit SawStop RT Fence Assemblies, this flip stop is built to facilitate repeated cuts with precision. Features: Designed to quickly give you accurate, repeatable measurementsCompatible with all SawStop Router FencesTop-mounted dovetail track...
    RTFLS
    CAD $47.00
    Add to Cart
  • SAW STOP 27IN. X 16IN. CAST IRON TABLE FOR
    Add to Cart

    SAWSTOP

    SAW STOP 27IN. X 16IN. CAST IRON TABLE FOR

    CAD $498.00
    This 27" cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Features: Actual dimensions: 27" w, 16" d, 1 1/2" hMaximize your shop space with the in-line...
    RTC27
    CAD $498.00
    Add to Cart
  • SAW STOP INDUSTRIAL MOBILE BASE MBIND000
    Add to Cart

    SAWSTOP

    SAW STOP INDUSTRIAL MOBILE BASE MBIND000

    CAD $579.00
    Supports saw and extension table, no additional extension hardware needed, 1000 lb capacity, no flimsy wheel brakes, non-marring polyurethane wheels, when disengaged the saw rests firmly on the ground distributing weight directly to the floor, not the...
    MBIND000
    CAD $579.00
    Add to Cart
  • SAW BLADE CT 6 1/2 55T MAKITA
    Add to Cart

    Makita

    SAW BLADE CT 6 1/2 55T MAKITA

    CAD $64.99
    A plunge circular saw and guide rail is a more portable option over a table saw for smooth, accurate, and splinter-free cuts in plywood and other large wood panels. Makita offers the 36V (18V X2) LXT® plunge circular saw, and Makita has an expanding...
    B57342
    CAD $64.99
    Add to Cart
  • TURNERS MESH SANDING PACK
    Add to Cart

    TURNERS MESH SANDING PACK

    CAD $39.99
    Turners Mesh Abrasive Roll Each Turners Mesh Abrasive strip has tiny holes in it to allow the wood particles to pass through. This helps prevent clogging the abrasive surface which makes the strips perfect for sanding projects on your lathe. The...
    B4157
    CAD $39.99
    Add to Cart
  • 10IN. ROUND CENTER FINDER
    Add to Cart

    10IN. ROUND CENTER FINDER

    CAD $20.99
    The Align Layout and Centering Template is great for laying out bowls, trays, and platters. It can also be used for laying out standard circles up to 10" / 250mm for many different projects. All you need to do is tap a small nail through the center hole,...
    B4153
    CAD $20.99
    Add to Cart
  • 3/8IN. FENCE FLIP STOP
    Add to Cart

    3/8IN. FENCE FLIP STOP

    CAD $27.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4152
    CAD $27.99
    Add to Cart
  • 1/4IN. FENCE FLIP STOP
    Add to Cart

    1/4IN. FENCE FLIP STOP

    CAD $27.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4151
    CAD $27.99
    Add to Cart
  • SAW BLADE CT 6 1/2 60T FOR MDF MAKITA
    Add to Cart

    Makita

    SAW BLADE CT 6 1/2 60T FOR MDF MAKITA

    CAD $83.99
    The Makita 60T Carbide-Tipped Saw Blade is the ideal accessory for the Makita 6-1/2 in. Plunge Circular Saw (model XPS01, sold separately). With the XPS01, the A-99998 is an ideal blade for cutting MDF. The Blade features high-grade carbide TCG tips for...
    A99998
    CAD $83.99
    Add to Cart
  • SAW BLADE CT 6 1/2 60T HI ATB MAKITA
    Add to Cart

    Makita

    SAW BLADE CT 6 1/2 60T HI ATB MAKITA

    CAD $75.99
    The Makita 60T Carbide-Tipped Saw Blade is the ideal accessory for the Makita 6-1/2 in. Plunge Circular Saw (model XPS01, sold separately). With the XPS01, the A-99982 is an ideal blade for cutting MDF. The Blade features high-grade carbide Hi-ATB tips...
    A99982
    CAD $75.99
    Add to Cart
  • SAW BLADE CT 6 1/2 48T FOR CORIAN MAKITA
    Add to Cart

    Makita

    SAW BLADE CT 6 1/2 48T FOR CORIAN MAKITA

    CAD $103.99
    The Makita 48T Carbide-Tipped Saw Blade is the ideal accessory for the Makita 6-1/2" Plunge Circular Saw (model XPS01, sold separately). With the XPS01, the A-98809 is an ideal blade for cutting Corain®. The Blade features high-grade carbide tips for...
    A98809
    CAD $103.99
    Add to Cart
  • SAWSTOP JOBSITE SAW DADO ZERO CLEARANCE
    Pre-Order Now

    SAWSTOP

    SAWSTOP JOBSITE SAW DADO ZERO CLEARANCE

    CAD $49.00
    Jobsite Saw Dado Inserts for 8in. Dado Set Engineered for the SawStop Jobsite Saw. Zero Clearance for Accurate Cuts and Reduced Tearout One push lockdown allows for tool-free operation Positioning screws ensure a solid and precise fit in the...
    TSIDJB
    CAD $49.00
    Pre-Order Now
  • MULTIFUNCTION MARKING AND SQUARE SCALE 12IN.
    Add to Cart

    DASQUA

    MULTIFUNCTION MARKING AND SQUARE SCALE 12IN.

    CAD $39.99
    This Multifunction Marking & Square Scale is 300mm/12". The Rule Stop shown here is large; it's sized to fit rulers up to 50mm wide exactly like our Woodworking Rules and has a length of two inches. It can be positioned anywhere along the...
    B4135
    CAD $39.99
    Add to Cart
  • SUPERMAX CLOSED STAND FOR 72550 AND 71938
    Add to Cart

    Supermax

    SUPERMAX CLOSED STAND FOR 72550 AND 71938

    CAD $799.00
    Heavy duty enclosed metal stand with storage shelf and latching door. Perfect for abrasive and accessory storage in a dust resistant cabinet. Mobile base included to make moving around the shop easy.
    SUPMX71938CL
    CAD $799.00
    Add to Cart
  • 4 ROLLS 120 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 120 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    For 16” drum sanders. Each wrap is cut to a taper and length of the drum and is ready to wrap on the drum. Fits Performax, JET, and Ryobi brand 16” drum sanders. Specifications: Type: Aluminum OxideGrit: 120 GritRolls: 4
    606120
    CAD $57.99
    Add to Cart
  • 4 ROLLS 100 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 100 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    For 16” drum sanders. Each wrap is cut to a taper and length of the drum and is ready to wrap on the drum. Fits Performax, JET, and Ryobi brand 16” drum sanders. Specifications: Type: Aluminum OxideGrit: 100 GritRolls: 4
    606100
    CAD $57.99
    Add to Cart
  • 4 ROLLS 80 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 80 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    For 16” drum sanders. Each wrap is cut to a taper and length of the drum and is ready to wrap on the drum. Fits Performax, JET, and Ryobi brand 16” drum sanders. Specifications: Type: Aluminum OxideGrit: 80 GritRolls: 4
    606080
    CAD $57.99
    Add to Cart
  • 4 ROLLS 60 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 60 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    For 16” drum sanders. Each wrap is cut to a taper and length of the drum and is ready to wrap on the drum. Fits Performax, JET, and Ryobi brand 16” drum sanders. Specifications: Type: Aluminum OxideGrit: 60 GritRolls: 4
    606060
    CAD $57.99
    Add to Cart
  • 4 ROLLS 36 GRIT FOR SUPMX71632 SUPERMAX
    Add to Cart

    Supermax

    4 ROLLS 36 GRIT FOR SUPMX71632 SUPERMAX

    CAD $57.99
    For 16” drum sanders. Each wrap is cut to a taper and length of the drum and is ready to wrap on the drum. Fits Performax, JET, and Ryobi brand 16” drum sanders. Specifications: Type: Aluminum OxideGrit: 36 GritRolls: 4
    606036
    CAD $57.99
    Add to Cart
  • FOLDING IN OUT FEED TABLE FOR SUPMX72550
    Pre-Order Now

    Supermax

    FOLDING IN OUT FEED TABLE FOR SUPMX72550

    CAD $199.00
    Infeed/Outfeed Table (Folding) for CLOSED STAND ONLY is the newest member of SuperMax Tools drum sander family which was designed with new features to improve productivity. Specifications: Weight: 10.89 Kg (24 lbs)
    SUP719387FCL
    CAD $199.00
    Pre-Order Now
  • CASTERS SET FOR SUPERMAX 1632 AND 1938
    Add to Cart

    Supermax

    CASTERS SET FOR SUPERMAX 1632 AND 1938

    CAD $129.00
    Make your SuperMax sander portable by installing these durable casters. (#98-0130). Can support up to 1,000 lbs. Good on all machines except the closed stands. Specifications: Weight: 2.95 Kg (6.5 lbs)Dimensions: 7”L x 7”W x 7”H
    SUPMX980130
    CAD $129.00
    Add to Cart
  • SUPERMAX SUPERBRUSH 24IN. BRUSH SANDER
    Pre-Order Now

    Supermax

    SUPERMAX SUPERBRUSH 24IN. BRUSH SANDER

    CAD $11,499.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. SuperMax offers a wide variety of the SuperBrush Sanders to meet the many needs of any woodworking shop. Our goal is to...
    SUPMX91267
    CAD $11,499.00
    Pre-Order Now
  • SUPERMAX 13IN. COMBINATION BRUSH DRUM SAND
    Pre-Order Now

    Supermax

    SUPERMAX 13IN. COMBINATION BRUSH DRUM SAND

    Now: CAD $5,759.10
    Was: $6,399.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The 13″ Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this...
    SUPMX91067
    Now: CAD $5,759.10
    Was: $6,399.00
    Pre-Order Now
  • FOLDING IN OUT FEED TABLE FOR SUPMX71938
    Pre-Order Now

    Supermax

    FOLDING IN OUT FEED TABLE FOR SUPMX71938

    CAD $199.00
    Additional infeed and outfeed support for the 19-38 Drum Sander for reduced tipping on long material—tables fold away for compact storage. These infeed/outfeed tables provide added material support for the SuperMax 19-38 Drum Sander (#44188, sold...
    SUPMX719387F
    CAD $199.00
    Pre-Order Now
  • SUPERMAX NYLON BRUSH HEAD FOR 19 38 SAND
    Add to Cart

    Supermax

    SUPERMAX NYLON BRUSH HEAD FOR 19 38 SAND

    Now: CAD $1,349.10
    Was: $1,499.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. SuperMax 19" Nylon Brush Head is for use with the SuperMax 19-38 Combination Sander. Features: 80-grit silicon- carbide...
    SUPMX719383
    Now: CAD $1,349.10
    Was: $1,499.00
    Add to Cart
  • SUPERMAX WIRE BRUSH HEAD FOR 19 38 SANDE
    Add to Cart

    Supermax

    SUPERMAX WIRE BRUSH HEAD FOR 19 38 SANDE

    Now: CAD $1,349.10
    Was: $1,499.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. SuperMax 19" Wire Brush Head is for use with the SuperMax 19-38 Combination Sander. The Wire Brush Head will pull out the...
    SUPMX719382
    Now: CAD $1,349.10
    Was: $1,499.00
    Add to Cart
  • SUPERMAX SANDING DRUM HEAD FOR 19 38 SAN
    Add to Cart

    Supermax

    SUPERMAX SANDING DRUM HEAD FOR 19 38 SAN

    CAD $299.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Sanding Drum accessory for the 19-38" Combo Drum/Brush Sander from SuperMax Tools. Specifications: Weight: 2.27 Kg (5 lbs)
    SUPMX719381
    CAD $299.00
    Add to Cart
  • SUPERMAX 19 38 COMBO BRUSH DRUM W/ STAND
    Add to Cart

    Supermax

    SUPERMAX 19 38 COMBO BRUSH DRUM W/ STAND

    CAD $4,199.00
    Perfect for the small shop or woodworking enthusiast, the SuperMax 19-38 Drum Sander reduces the tedium of hand sanding, speeds up the sanding process, and produces more consistent results! Find out how it compares to other brands, watch videos, and...
    SUPMX71938
    CAD $4,199.00
    Add to Cart
  • FOLDING IN OUT FEED TABLE
    Pre-Order Now

    Supermax

    FOLDING IN OUT FEED TABLE

    CAD $199.00
    By adding the Folding Infeed/Outfeed Tables you will gain additional support to the conveyor table of the SuperMax Tools 16x32 Drum Sander (SUPMX71632). These tables will give you extra stability when sanding long stock on their open-end drum sander...
    SUPMX716327F
    CAD $199.00
    Pre-Order Now
  • 3 ROLLS ASSORTED GRITS SUPMX72550
    Add to Cart

    Supermax

    3 ROLLS ASSORTED GRITS SUPMX72550

    CAD $59.99
    These rolls of sandpaper are made for 25-50" drum and combination sanders. 3 total abrasives, 1 of each grit These sandpaper rolls provide multiple replacements for your drum sander. Cut your own taper and save on aluminum oxide sandpaper rolls...
    SUPMX605000
    CAD $59.99
    Add to Cart
  • LAGUNA 7.5HP PRO SHAPER 3PH
    Add to Cart

    Laguna

    LAGUNA 7.5HP PRO SHAPER 3PH

    Now: CAD $5,399.10
    Was: $5,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines. For...
    MSHAP5030013
    Now: CAD $5,399.10
    Was: $5,999.00
    Add to Cart
  • LAGUNA 5HP PRO SHAPER 1PH
    Add to Cart

    Laguna

    LAGUNA 5HP PRO SHAPER 1PH

    Now: CAD $5,399.10
    Was: $5,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines. For...
    MSHAP5010013
    Now: CAD $5,399.10
    Was: $5,999.00
    Add to Cart
  • LAGUNA 51IN. WIDE BELT SANDER 30HP 2RK
    Add to Cart

    Laguna

    LAGUNA 51IN. WIDE BELT SANDER 30HP 2RK

    CAD $61,899.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MSANWB51X752
    CAD $61,899.00
    Add to Cart
  • LAGUNA 43IN. WIDE BELT SANDER 25HP 2RK
    Add to Cart

    Laguna

    LAGUNA 43IN. WIDE BELT SANDER 25HP 2RK

    CAD $48,399.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MSANWB43X752
    CAD $48,399.00
    Add to Cart
  • LAGUNA 37IN. WIDE BELT SANDER 20HP 1K
    Add to Cart

    Laguna

    LAGUNA 37IN. WIDE BELT SANDER 20HP 1K

    CAD $27,899.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MSANWB37X751
    CAD $27,899.00
    Add to Cart
  • LAGUNA 37IN. WIDE BELT SANDER 10HP 1K
    Add to Cart

    Laguna

    LAGUNA 37IN. WIDE BELT SANDER 10HP 1K

    CAD $22,499.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MSANWB37X601
    CAD $22,499.00
    Add to Cart
  • LAGUNA 7.5HP PX 22 SHEARTEC PLANER
    Add to Cart

    Laguna

    LAGUNA 7.5HP PX 22 SHEARTEC PLANER

    Now: CAD $9,449.10
    Was: $10,499.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines...
    MPLANPX22750
    Now: CAD $9,449.10
    Was: $10,499.00
    Add to Cart
  • LAGUNA 10HP PX 22 SHEARTEC PLANER
    Add to Cart

    Laguna

    LAGUNA 10HP PX 22 SHEARTEC PLANER

    Now: CAD $9,449.10
    Was: $10,499.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. The all-new PX|22 planers are an innovative new design for Laguna planers. The Laguna PX|22 planers are loaded with features...
    MPLANPX22100
    Now: CAD $9,449.10
    Was: $10,499.00
    Add to Cart
  • LAGUNA REVO 15 X 24 LATHE
    Add to Cart

    Laguna

    LAGUNA REVO 15 X 24 LATHE

    Now: CAD $2,699.10
    Was: $2,999.00
    Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status. With the launch of the Revo 15|24 Laguna is filling the gap between the Revo 12|16 & the legendary Revo 18|36, providing...
    MLAREVO1524
    Now: CAD $2,699.10
    Was: $2,999.00
    Add to Cart
  • LAGUNA 14 BANDSAW WHEEL KIT
    Add to Cart

    Laguna

    LAGUNA 14 BANDSAW WHEEL KIT

    Now: CAD $179.10
    Was: $199.00
    The Laguna 14 inch bandsaw mobility kit was specifically designed for the Laguna 14 12 bandsaw (number 854323) and the two Laguna 14bx bandsaws (864582 and 864583). This unit provides maximum stability and is easy to install because there is no drilling...
    MBA1412WS
    Now: CAD $179.10
    Was: $199.00
    Add to Cart

Busy Bee Tools has the woodworking machines and tools that every serious woodworker is after. With a wide selection of band saws, table saws, planers, jointers, sanders, shapers, router tables, wood lathes and more, you can count on Busy Bee Tools for your woodworking needs. Our two in house brands, Craftex and Craftex CX-Series feature two and three year warranties respectively and these in house brands are bought and sold directly to the end user, avoiding middleman markups and saving you money. For the serious woodworker, Busy Bee Tools is the number one choice.

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley